438 results about "Borium" patented technology

The invention relates to steel for a steam-temperature ultra-supercritical thermal power unit and a preparation method thereof, belonging to the technical field of heat resistant steel. The steel comprises the following chemical compositions by weight percentage: 0.06-0.10 percent of carbon, 0.1-0.5 percent of silicon, 0.2-0.8 percent of manganese, not more than 0.004 percent of phosphorous, not more than 0.002 percent of sulfur, 8.0-9.5 percent of chromium, 2.5-3.5 percent of tungsten, 2.5-3.5 percent of cobalt, 0.03-0.07 percent of niobium, 0.10-0.30 percent of vanadium, 0.80-1.20 percent of copper, 0.006-0.010 percent of nitrogen, 0.010-0.016 percent of boron, 0.01-0.04 percent of rare-earth cerium, not more than 0.01 percent of nickel, not more than 0.005 percent of aluminum, not more than 0.01 percent of titanium, not more than 0.01 percent of zirconium and the balance of ferrum and inevitable impurity elements. The steel has the advantages that the steel can be used for preparing G115 steel of 650 DEG C of steam-parameter ultra-supercritical thermal power unit and a large-diameter boiler tube thereof, and the room-temperature mechanical property, the impact property, the high-temperature mechanical property and the permanence property of the steel are much higher than those of P92 steel in the Gb5310 and ASME standard.

The invention relates to ultrahigh-malleability tunnel supporting anchor pile steel of converter continuous cast billet and a production method, which belongs to the technical field of a mine anchor rod. The anchor rod steel comprises the following components by weight percent: 0.5 to 0.70 percent of carbon, 0.15 to 1.20 percent of silicon, 0.5 to 2.5 percent of manganese, less than or equal to 0.045 percent of phosphorus, less than or equal to 0.045 percent of sulfur, 0 to 1.00 percent of chrome, 0 to 1.00 percent of nickel, 0 to 1.00 percent of molybdenum, 0 to 0.30 percent of copper, 0.03 to 0.40 percent of vanadium, 0.01 to 0.2 percent of aluminum, 0 to 0.10 percent of titanium, 0 to 0.10 percent of boron, 0.001 to 0.0 percent of niobium, 0.004 to 0.020 percent of nitrogen, and iron for the surplus; the yield strength Rel is larger than or equal to 600 MPa, the percentage elongation delta 5 is larger than or equal to 20 percent, the impact strength is 20 DEG C, Akv is larger than or equal to 27 J, and the breaking load is larger than or equal to 300 KN. By adopting the production process flow of converter crude metallurgy, LF furnace fine metallurgy and full protection continuous casting, the steel grade has the advantages that the purity is high, the structure is dense, the grain is fine, the physical chemistry properties of the steel are stable, the over-all mechanical property is good, the production operation and process flow are simple, and the rolled metal finished product can be directly used without heat treatment to the rear part.

One kind of rare earth boraxium alloying high manganese steel that has the mass ratio of ingredient: C 0.9-1.6, Mn 13-30, B 0.0005-0.02, Re 0.01-0.05, Si 0.3-1.0, Cr<3, Mo<2, Ni<1, Cu<1, V+Ti+Nb+Zr+N+Al+Ca<2 S<0.04, P<0.07, the residue is Fe. Its process includes blending, melting, tapping of molten steel, adding alterant, packing. Its advantages include a good abradability of more than two fold than formal high manganese steel.

The invention relates to a steel with high mechanical strength and wear resistance. More specifically, the invention relates to a method of reducing the segregated veins of a steel having high mechanical strength, high wear resistance and the following weight composition: 0.30% <= C <= 1.42%; 0.05% <= Si <= 1.5%; Mn <= 1.95%; Ni <= 2.9%; 1.1% <= Cr <= 7.9%; 0.61% <= Mo <= 4.4%; optionally V <= 1.45%, Nb <= 1.45%, Ta <= 1.45% and V+Nb/2 + Ta/4 <= 1.45%; less than 0.1% borium, 0.19% (S + Se/2 + Te/4), 0.01% calcium, 0.5% rare earths, 1% aluminium, 1 %copper; the remainder being iron and impurities resulting from the production thereof. The composition also comprises: 800 <= D <= 1150, where D = 540(C)<0.25> + 245 (Mo + 3 V + 1.5 Nb + 0.75 Ta)<0.30> + 125 Cr<0.20 >+ 15.8 Mn + 7.4 Ni + 18 Si. According to the invention, all or part of the molydenum is replaced by a double proportion of tungsten, such that W >= 0.21%, and Ti, Zr, C are adjusted so that, after said adjustment, Ti + Zr/2 >= 0.2 W, (Ti + Zr/2) * C >= 0.07, Ti + Zr/2 <= 1.49 % and D is unchanged at 5 %. The invention also relates to the steel obtained and to a method of producing a steel part.

The invention relates to chromium hot work die steel which belongs to hot work die steel, in particular to hot work die steel containing lower tungsten and a thermal processing technique thereof. Counted by weight percentage, the die steel includes 0.3 to 0.8 percent of C, 0.2 to 0.8 percent of Si, 0.2 to 0.8 percent of Mn, 6.0 to 8.0 percent of Cr, 1.0 to 2.4 percent of W, 0.8 to 2.0 percent of Mo, 0.3 to 1.0 percent of V, 0.3 to 8.0 percent of Co, 0.3 to 1.5 percent of Ni, equal to or less than 0.005 percent of S, equal to or less than 0.030 percent of P and 0.03 to 0.10 percent of B; the content range of a nitride is as follows: the nitride is equal to or more than 0.02 percent, or equal to or less than 0.20 percent; the content range of N is as follows: the N is equal to or more than 0.02 percent, or equal to or less than 0.10 percent; and the rest is Fe. The grains of the steel are thinner; the effects of greatly increased heat resistance, toughness and anti-pressing intensity are generated; the rigidity is between 55 and 61HRC which is more than three times than the durable times of the existing die steel. The invention also provides a thermal processing technique with a lower quenching temperature between 1050 and 1090 DEG C for the steel.

The invention relates to a high strength foundry air cooling bainite wear resistant steel that the chemical constituents is 0.32-0.65 C, 0.8-3.0 Si, 1.2-3.0 Mn, 0.5-0.8 Cr, 0.3-0.8 Cu, 0.001-0.008 B, 0.18-0.35 Al, 0.05-0.15 Y, 0.05-0.20 Ti, 0-0.12 Mg, 0-0.12 Ca, 0-0.15 Zn, and 0.10<Mg+Ca+Zn<0.25, the else is Fe and trace impurities. The process includes the following steps: smelting waste steel, pig iron, ferrochrome iron and copper board, adding ferrosilicon and ferromanganese preliminary deoxidation into melting down and alloying; heating to 1600-1660 degree centigrade after adjusting the constituents adding aluminum deoxidatioin and alloying and blast furnace tapping; putting the compounding modification particle of Yt, boron, titanium, magnesium, calcium, and zinc on the bottom of pouring ladle, taking modification process to the molten steel; molding the molten steel after modification process into normal matrix for casting. The invention could prolong the useful life of antifriction component, improve working efficiency, and have good economic benefit.

The invention relates to novel chrome hot work die steel belonging to hot work die steel, particularly relating to the hot work die steel with low content of tungsten and the thermal treatment process thereof. The hot work die steel comprises 0.35-0.7 percent of C, 0.3-1.3 percent of Si, 0.3-1.3 percent of Mn, 7.0-11.0 percent of Cr, 0.4-1.2 percent of W, 0.4-1.2 percent of Mo, 0.4-1.2 percent of V, 1.0 percent of Ni, 0.005 percent or less of S, 0.030 percent or less of P, 0.03 percent of-0.10 percent of B, equal to or more than 0.02 percent and equal to or less than 0.20 percent of nitride, equal to or more than 0.02 percent and equal to or less than 0.10 percent of N, and the rest of Fe by weight percent. The steel of the invention has finer crystal grain, generates greatly increased heat resistance, toughness and compressive strength and has more than three times of durable frequencies than the existing die steel. The invention further provides the thermal treatment process with relatively low steel quenching temperature of 1020-1050 DEG C.

The invention discloses a high-boron high-speed steel composite roller and a manufacturing method thereof, belonging to the technical field of rollers. A roller shaft and a high-boron high-speed steel composite roller sleeve are combined together through hot charging; the outer layer of the composite roller sleeve is wear-resistant high-boron high-speed steel, and the inner layer is a steel pipe; the roller shaft is arranged in the steel pipe and coaxially penetrates through the steel pipe; the molten steel of the wear-resistant high-boron high-speed steel at the outer layer comprises the following chemical components in percentage by mass: 1.25-1.80% of C, 1.25-1.60% of B, 5.5-8.0% of Cr, 1.0-1.5% of W, 2.5-3.0% of Mo, 0.3-0.6% of V, 0.6-1.2% of Ni, 0.3-0.9% of Si, 0.30-0.55% of Mn, less than 0.04% of S, less than 0.05% of P and the balance of Fe and unavoidable impurities; the molten steel is prepared by casting and combination with the steel pipe after treatment outside the furnace. The composite roller disclosed by the invention has the advantages of high hardness, good wear resistance and low production cost, and brings good benefits in application.

The invention relates to a smelting method for stably increasing the content of boron in boron-containing steel. The smelting method is characterized in that high-carbon ferromanganese, high-carbon ferrochromium and iron-core aluminum are subjected to the deoxidation alloying in the steel tapping process of a converter, and a whole-course bottom argon blowing and wash heat technology is adopted for reducing oxygen content and nitrogen content in the steel; after steel tapping is completed, molten steel is lifted to an argon station, and the molten steel is converted to an LF (Ladle Furnace) after ferroaluminium is added for adjusting the activity of oxygen in the steel to a required control range; and submerged arc operation, soft argon blowing control, a deep deoxidation technology and a titanium alloy technology are adopted for refining in the LF, then boron alloying is carried out, and later the long-time soft argon blowing is carried out, thus the recovery rate of boron in the steel reaches 82%-86%, the problems of low and instable recovery rate of boron are solved, the fluctuation quantity between the furnaces is less than 0.0005%, the ideal control level is achieved, the dependence of boron alloying on vacuum refining is eliminated, and the requirement of subsequent process for the quality of the boron-containing steel is ensured.

A high-boron cast alloy guide and its heat treatment method pertain to the technical field of steel rolling. The chemical composition of the guide provided by the present invention (mass fraction, %): C 0.25-0.45, Cr 12.0-15.0, B 1.0-2.5, Mo 0.5-0.8, Mn 1.8-2.5, Al 0.10-0.30, Re 0.08-0.20, Mg 0.04-0.08, V 0.05-0.10, N 0.01-0.03, Ti 0.10-0.20, Nb 0.10-0.20, 0.25<=Ti+Nb<=0.35, Si<1.0, S<0.05, P<0.05, and Fe as the rest. Through smelting, casting, oil quenching, tempering and other steps, the present invention prepares a high-boron cast alloy guide with high hardness and strength, desirable tenacity and wear resistance, and low cost.

The invention provides a boron-containing fluorine-free fluxing slag-melting agent for electric steelmaking, belonging to the technical field of steelmaking. The slag-melting agent is made from the following components in parts of by weight: 30-50 parts of boron sludge, 20-40 parts of laterite, 20-40 parts of quicklime and 5-15 parts of ferric oxide. The preparation method of the slag-melting agent comprises the following steps: sufficiently drying and dehydrating the raw materials, and weighting and proportioning based on weight parts; and grinding, evenly mixing, and making block slag by a pelleting-drying-sintering method or premelting-cooling-crushing-sieving method. Compared with the prior art, the invention has the following beneficial effects: the product provided by the invention is used as the fluxing agent instead of fluorite, calcium aluminate and ferriferous oxide, thereby eliminating fluorine pollution and relieving the corrosion action of the slag-melting agent on the furnace lining; and particularly, the waste boron sludge are recycled, and high-cost calcium aluminate is replaced with low-cost laterite with abundant reserves, thus the boron-containing fluorine-free fluxing slag-melting agent provided by the invention has important meanings for reasonably and comprehensively utilizing mineral resources, lowering the steelmaking cost, and realizing high-efficiency low-cost low-pollution green steelmaking.

The invention relates to a ferrite-free heavy caliber thick-wall heat resistant steel pipe material which belongs to the technical field of steel tubes for supercritical thermal power generating units and comprises the following components in percent by weight: 0.090-0.12 percent of carbon, less than 0.3 percent of silicon, 0.40-0.6 percent of manganese, not more than 0.020 percent of phosphorus, not more than 0.010 percent of sulfur, 8.5-9.0 percent of chromium, 0.1-0.3 percent of nickel, 1.7-2.0 percent of tungsten, 0.3-0.5 percent of Mo, 0.04-0.07 percent of niobium, 0.15-0.22 percent of vanadium, 0.04-0.07 percent of nitrogen, 0.001-0.004 percent of boron, 0.01-0.03 percent of cobalt, 0.01-0.07 percent of copper, 0-0.01 percent of aluminum and the balance of iron. The invention has the advantages that: based on the P92 steel, through optimizing the component proportion and adding elements Co and Cu, a heavy caliber thick-wall heat resistant steel pipe is in a single martensite structure, has excellent property and meets the requirements on ASME CC2197-6.

The invention relates to a laser remanufacturing and reinforcing method of a mine car wheel set. The laser remanufacturing and reinforcing method is characterized in that nickel-based alloy powder is adopted for a fusion covering middle buffer layer, and the nickel-based alloy powder comprises the following chemical components in percentage by weight: 0.33%-0.50% of carbon, 0.32%-3.8% of silicon, 0.65%-7.5% of chromium, 0.25%-3.5% of iron, 0.10%-1.5% of boron, 0.10%-0.2% of vanadium and the balance of nickel and inevitable impurities; iron-based alloy powder is adopted for a fusion covering strengthening layer, and the iron-based alloy powder comprises the following components in percentage by weight: 0.10%-1.5% of carbon, 0.22%-2.8% of silicon, 4.5%-6.0% of chromium, 4.5%-5.0% of molybdenum, 1.5%-2.0% of boron, 3.0%-3.5% of manganese, 2.0%-2.5% of vanadium, 6.5%-7.5% of tungsten and the balance of iron and inevitable impurities. Thus, the laser remanufacturing and reinforcing method disclosed by the invention can be used for effectively prolonging the service life of the mine car wheel set and reducing the replacement frequency of the mine car wheel set.

The invention discloses a method and fixture for welding high temperature alloy and cupronickel. A brazing filler metal consisting of powdery gold 20, nickel, chromium, iron, silicon and boron, or consisting of platinoid copper, manganese, cobalt and nickel is used for welding. The brazing filler metal is coated or arranged between a cupronickel piece and high temperature alloy, and the peripheryof the bonding surface of the cupronickel piece and the high temperature alloy is coated with a red stop-off agent and is pressed tightly by a fixture. A brazing filler metal welding piece which is pressed tightly by the fixture is put in a vacuum furnace, and then the processes of vacuumizing, heating and brazing are performed. Since the brazing filler metal consisting of copper, manganese, cobalt and nickel has the characteristics of high strength, good corrosion resistance, low price and high weld joint quality, and the brazing filler metal consisting of gold 20, nickel, chromium, iron, silicon and boron has the characteristics of good ductility and strong wetting function, respective pressing is omitted the process of brazing, thereby achieving good molding quality of the weld joint. Since the brazing elements of the two brazing filler metals used in the brazing process have the alloying effect on the two materials to be connected, the brazing joint has large spreading area, the joint is high in strength, and the quality of the brazing joint meets the requirement.

A composite roll having uniform roll surface hardness and made of high-speed steel containing boron and a method for manufacturing the composite roll belong to the technical field of manufacture of rolls. A roll body is made of the high-speed steel containing boron, a roll core is made of spheroidal graphite cast iron, the roll body and the roll core are centrifugally cast in a compounded manner,and metallurgical bonding is realized. On the basis of high-tungsten high-speed steel, the chromium content of the roll body is reduced, and the boron and a proper quantity of trace alloying elementssuch as potassium, sodium, calcium, barium, zinc, magnesium, lanthanum, cerium and the like aer added into the roll body. The roll body is heated in a heating furnace, stays warm and then is placed in a cooling control device, a roll neck is coated with a heat-insulating material and is placed outside the cooling control device, the roll body is in spray cooling according to a spray quenching process 1, then is in spray cooling according to a spray quenching process 2 until the temperature of the roll body is lower than 160 DEG C, and is in natural air cooling, when the temperature of the roll surface rises to 300 DEG C, the roll body is in spray cooling according to the spray quenching process 2 again, spray cooling is performed repeatedly until the rising temperature of the roll surfacedoes not exceed 300 DEG C, and then the roll body is in air cooling to the room temperature. The roll surface hardness of the composite roll is high, hardness uniformity of the roll surface is good, wear resistance of the roll is fine, and the service life of the composite roll is long.

The present invention provides a boron steel sheet including components of C: 0.20 mass% or more and 0.45 mass% or less, Si: 0.05 mass% or more and 0.8 mass% or less, Mn: 0.5 mass% or more and 2.0 mass% or less, P: 0.001 mass% or more and 0.04 mass% or less, S: 0.0001 mass% or more and 0.006 mass% or less, Al: 0.005 mass% or more and 0.1 mass% or less, Ti: 0.005 mass% or more and 0.2 mass% or less, B: 0.001 mass% or more and 0.01 mass% or less, N: 0.0001 mass% or more and 0.01 mass% or less, and the balance including Fe and inevitable impurities, wherein a mean concentration of solid B in an area from a surface to a depth of 100 [mu] m is 10 ppm or more.

The invention discloses a high-strength high-toughness material for a lining plate of a mine ball mill, which comprises the following chemical components in percentage by weight: 0.3-0.5% of C, 0.3-1.5% of Si, 0.5-1.5% of Mn, 0.8-4.0% of Cr, less than or equal to 0.1% of S, less than or equal to 0.1% of P, 0.08-1.2% of boron, 0.06-0.8% of titanium, 0.02-0.3% of vanadium, 0.09-0.5% of molybdenum, 0.05-0.2% of bismuth and 0.2-1.5% of grain-refined element. According to the material disclosed by the invention, the impact toughness of the material obtained by smelting, modification treatment and heat treatment exceeds 35-80J, and the tensile strength exceeds 1,000MP; compared with the material in the prior art, the wear resistance is improved by 3 times.

The invention provides a 6-8mm high-strength structural steel plate and a manufacture method thereof, aiming at meeting the market requirement for the technology of utilizing thinner steel plates for a concrete pump truck, an aerial ladder and a special vehicle for high-level rescue, and overcoming the shortcomings in the aspect ofdue to the strength, service life and the likeothers of low-level steel. The manufacture method is characterized in that low carbon and manganese contents are is designed; 0.0012% of boron and 0.08% of molybdenum element are added; a converter is utilized for realizing quick smelting; the external refining and degassing refining are performed to improve the purity of molten steel; and rolling, quenching and tempering technologies are carried out to improve the strength and toughness of the steel as well as improve the straightness of the steel plate, in order to obtain a tempered sorbite metallographic structure. The method is short in process, high in efficiency, easy to operate and weld, and low in cost; and the shape and straightness of the plate are controlled to meet the requirements on manufacturing and using of modern pump trucks, high-level aerial ladders, rescue work facilities and other telescopic arm structures.