The invention discloses a technology for forging a squeeze roller of a cement roller press. The squeeze roller comprises, by weight, 0.20-0.26% of C, 2.5-2.70% of Mn, 0.60-0.80% of Si, 3.40-3.80% of Cr, 0.10-0.20% of Mo, 0.10-0.20% of Ni, 0.02-0.03% of Ti, 0.005-0.007% of B, and the balance Fe. The forging technology comprises the following steps that firstly, a steel ingot comprising the above materials is heated to the temperature ranging from 1160 DEG C to 1180 DEG C, primary upsetting is carried out on the steel ingot, the steel ingot is drawn out through a WHF method, the height-diameter ratio of the drawn-out steel ingot is controlled within 1.6-1.8, and the total forging ratio is controlled within 2.0-2.2; secondly, the blank obtained in the first step is heated again, the heating temperature ranges from 1140 DEG C to 1160 DEG C, secondary upsetting is carried out on the steel ingot, a wide flat anvil is drawn out to the extreme degree, the forging ratio ranges from 1.5 to 2.0, four times of drawing are carried out, the drawing reduction rate of the first two times is controlled within 12% to 14%, the drawing reduction rate of the later two times is controlled within 24% to 26%, chamfering and rolling are carried out on the squeeze roller, and pressing is carried out; thirdly, heat treatment after forging is carried out.