9511 results about "Peroxide" patented technology

Elastomers are formed from castor oil and / or ricinoleic acid estolides and a polyester formed from an epoxidized vegetable oil such as ESO and a polycarboxylic acid such as sebacic acid, optionally in the presence of a peroxide initiator, or include crosslinked reaction products derived from ricinoleic acid or castor oil estolides, epoxy group-containing compounds such as epoxy resins and / or epoxidized vegetable oil, epoxy hardeners such as polyamine and polycarboxylic acid hardeners, thermally activated free radical initiators such as peroxides, and optionally but preferably include fillers such as limestone or wood flour. The elastomers can be prepared using a two-step, solvent-less procedure at elevated or ambient temperatures. These predominantly “all-natural” elastomers have physical properties comparable to conventional petroleum-based elastomers and composites and exhibit good flexibility, resiliency, abrasion resistance and inertness to hydrolysis. The resulting elastomers display good mechanical strength and resiliency, are resistant to abrasion and hydrolysis, and can be processed into sheet materials, which makes them attractive as floor covering components.

In a multi-piece solid golf ball comprising a solid core consisting of a center core and an outer core, an inner cover layer and an outer cover layer, the solid core is molded from a rubber composition comprising a base rubber composed of (a) a polybutadiene having a high cis-1,4 content, a minimal 1,2 vinyl content and a viscosity η of up to 600 mPa·s at 25° C. as a 5 wt % toluene solution, being synthesized using a rare-earth catalyst, in combination with (b) another diene rubber, (c) an unsaturated carboxylic acid, (d) an organosulfur compound, (e) an inorganic filler, and (f) an organic peroxide; and the center core has a specific JIS-C hardness on its center and a specific JIS-C hardness on its surface and the certain difference, the outer core is harder than the surface hardness of the center core, the cross-sectional hardness of 1 mm outside from the border between the center core and the outer core is a specific range on JIS-C hardness, the surface of the outer core has a specific JIS-C hardness, the inner cover layer has a specific Shore D hardness; the outer cover layer has a specific Shore D hardness; and the outer cover layer has a lower Shore D hardness than the inner cover layer. This combination of features gives the ball a good, soft feel upon impact and an excellent spin performance that provides increased distance.