2564 results about "Solid fuel" patented technology

A system 26 for removing elemental mercury or mercury compounds handles carbonaceous sorbent 28 of a starter batch stored in a silo 30 in an agglomerated state. The sorbent 28 is fed by a feeder 32 to a separation device 34, which comminutes (if necessary) and de-agglomerates the sorbent particles 28 to their primary size distribution. This device 34 may be a particle-particle separator or a jet mill, where compressed air or high-pressure steam is the energy source. The de-agglomerated sorbent 28 of a contact batch created from the starter batch is conveyed by an airsteam for injection at a contact location 66 in a flue gas duct whereat carbonaceous sorbent of the contact batch adsorbs mercury from the flue gas.

A power plant including an air separation unit (ASU) arranged to separate nitrogen, oxygen, carbon dioxide and argon from air and produce a stream of substantially pure liquid oxygen, nitrogen, carbon dioxide and argon; a steam generator, fired or unfired, arranged to combust a fuel, e.g., natural gas, liquefied natural gas, synthesis gas, coal, petroleum coke, biomass, municipal solid waste or any other gaseous, liquid or solid fuel in the presence of air and a quantity of substantially pure oxygen gas to produce an exhaust gas comprising water, carbon dioxide, carbon monoxide, nitrogen oxides, nitrogen, sulfur oxides and other trace gases, and a steam-turbine-generator to produce electricity, a primary gas heat exchanger unit for particulate / acid gas / moisture removal and a secondary heat exchanger arranged to cool the remainder of the exhaust gases from the steam generator. Exhaust gases are liquefied in the ASU thereby recovering carbon dioxide, nitrogen oxides, nitrogen, sulfur oxides, oxygen, and all other trace gases from the steam generator exhaust gas stream. The cooled gases are liquefied in the ASU and separated for sale or re-use in the power plant. Carbon dioxide liquid is transported from the plant for use in enhanced oil recovery or for other commercial use. Carbon dioxide removal is accomplished in the ASU by cryogenic separation of the gases, after directing the stream of liquid nitrogen from the air separation unit to the exhaust gas heat exchanger units to cool all of the exhaust gases including carbon dioxide, carbon monoxide, nitrogen oxides, nitrogen, oxygen, sulfur oxides, and other trace gases.

Heating units, drug supply units and drug delivery articles capable of rapid heating are disclosed. Heating units comprising a substrate and a solid fuel capable of undergoing an exothermic metal oxidation reaction disposed within the substrate are disclosed. Drug supply units and drug delivery articles wherein a solid fuel is configured to heat a substrate to a temperature sufficient to rapidly thermally vaporize a drug disposed thereon are also disclosed.

A system 26 for removing elemental mercury or mercury compounds handles carbonaceous sorbent 28 of a starter batch stored in a silo 30 in an agglomerated state. The sorbent 28 is fed by a feeder 32 to a separation device 34, which comminutes (if necessary) and de-agglomerates the sorbent particles 28 to their primary size distribution. This device 34 may be a particle-particle separator or a jet mill, where compressed air or high-pressure steam is the energy source. The de-agglomerated sorbent 28 of a contact batch created from the starter batch is conveyed by an airsteam for injection at a contact location 66 in a flue gas duct whereat carbonaceous sorbent of the contact batch adsorbs mercury from the flue gas.

A solid fuel candle which is highly adapted for use both in a container and also as a free-standing candle includes at least 85 percent hydrogenated soybean oil, approximately 0 to 4 percent synthetic wax composition, approximately 0 to 4 percent of a second hydrogenated vegetable or petroleum oil, approximately 0 to 10 percent fragrance or scent, and approximately 0 to 3 percent dye. The hydrogenated vegetable oil most preferably has an iodine value of approximately 50 and a melting point of approximately 125 degrees Fahrenheit, with a free fatty acid content of less than one-tenth of one percent. The synthetic wax composition is most preferably formed from alpha olefin monomers and oligomers under free radical conditions at relatively low pressures to yield a highly branched polymer wax having congealing and melting points lower than the starting alpha olefin material and a higher molecular weight.

A method and device for the gasification of pulverized fuels from solid fuels such as bituminous coals, lignite coals, and their cokes, petroleum cokes, coke from peat or biomass, in entrained flow, with an oxidizing medium containing free oxygen, by partial oxidation at pressures between atmospheric pressure and 80 bar, and at temperatures between 1,200 and 1,900° C., at high reactor capacities between 1,000 and 1,500 MW. The method uses the following steps: metering of the fuel, gasification reaction in a gasification reactor with cooled reaction chamber contour, quench-cooling, crude gas scrubbing, and partial condensation.

A fuel cell comprising: (a) a binary anode, (b) a cathode, and (c) a liquid electrolyte disposed between and interacting with the binary anode and the cathode, wherein the binary anode includes at least one liquid fuel and at least one solid fuel. Preferably, the electrolyte includes an alcohol such as methanol, and the solid fuel includes aluminum, magnesium and / or zinc.

An automated temperature control system for a barbecue grill or other structure comprises an automated damper assembly coupled to a vent of said grill, which damper assembly opens and closes selectively to adjust the flow passage area of the grill's vent. The system further comprises an operating area temperature probe for communicating the temperature of the operating area of the grill to the automated damper assembly, such that the automated damper assembly may maintain a user-specified target operating temperature by way of affecting combustion rates within the grill. A remote control may also be provided to allow the user to input a desired temperature for the system to obtain and / or to change temperature information for the grill or other structure.

A process for preparing the H2-enriched gas by catalytic gasification of solid fuel features that the solid catalyst used also as the heat carrier is circulating through riser combustion reactor, solid catalyst storage tank, catalytic reforming reactor and pyrolyzing reactor. In said pyrolyzing reactor, the biomass or coal and the solid heat carrier (catalyst) take part in fast pyrolytic reaction. Its resultant and the water steam take part in catalytic decomposing and reforming reaction to generate H2-enriched gas or synthetic gas.

Pyrolyzing gasification system and method of use including primary combustion of non-uniform solid fuels such as biomass and solid wastes within a refractory lined gasifier, secondary combustion of primary combustion gas within a staged, cyclonic, refractory lined oxidizer, and heat energy recovery from the oxidized flue gas within an indirect air-to-air all-ceramic heat exchanger or external combustion engine. Primary combustion occurs at low substoichoimetric air percentages of 10-30 percent and at temperatures below 1000 degrees F. Secondary combustion is staged and controlled for low NOx formation and prevention of formation of CO, hydrocarbons, and VOCs. The gasifier includes a furnace bed segmented into individual cells, each cell is independently monitored using a ramp temperature probe, and provided with controlled air injection. Gasifier air injection includes tuyere arrays, lances, or both. The oxidizer includes three serially aligned stages separated by air injecting baffles, and ability to adjust the exit air temperature.

In embodiments of the present invention, a method of heat treating a solid fuel briquette may include heating the solid fuel briquette using energy from at least one of a heat furnace or an electromagnetic energy system of a solid fuel treatment facility as the solid fuel briquette is moved through the treatment facility to a specified internal temperature, and sealing the heat-treated solid fuel briquette in a vessel for a duration of time.

Embodiments presented herein describe an apparatus and method to convert carbonaceous materials, particularly biomass and those biomass resources which are remotely located, into a high performance solid fuel. This method, and the apparatus described as the means to accomplish this method, provides a continuous process which can be completely powered by the energy contained in the biomass. The heat, mechanical power and electrical power are provided from the energy in the biomass, through the methods described. In this way, the apparatus is free to operate in remote locations, where no power or auxiliary fuel sources are available.

A method for removing mercury from flue gases generated by the combustion of coal comprises: storing a starter batch of activated carbon in an agglomerated state; de-agglomerating the starter batch in a separation device to create a contact batch of activated carbon; transporting the contact batch to a contact location; injecting the contact batch into contact with the flue gas at a contact location having a temperature between 400° F. and 1100° F., whereupon the activated carbon of the contact batch adsorbs mercury from the flue gas; and removing the activated carbon having mercury adsorbed thereon from the flue gas. The transporting step is conducted with substantially no intermediate storage of the contact batch following the de-agglomeration of the starter batch to prevent re-agglomeration of the activated carbon prior to injection.

In embodiments of the present invention improved capabilities are described for a system and method for briquetting solid fuel before or after treatment with electromagnetic energy. In the system and method, solid fuel is transported through a continuous feed solid fuel treatment facility, treated using electromagnetic energy, and briquetted after treatment.

A solid fuel is formed in a cuber to form body pieces formed of materials extruded through a die with a density greater than 35 lbs / cu ft; an energy content greater than 6500 BTU / lb; transverse dimensions less than 1.5 inches; and a length less than 4 inches; from plant biomass material which contains components when extended of greater than 1.0 inch. Primarily the materials are paper or other cellulose product and crop residue such as wheat straw. The cellulose and lignin from these materials act without additional binders as binders and encasing materials. The moisture content is maintained at a target value by mixing selected quantities of the materials without drying. The cubing machine has a feeding system where the space between the inner rotor and outer casing is smaller than 4 inches and the height of the outer flight is less than 1 inch.

A Brayton-cycle rotary ramjet engine (10) operated within the confines of a helically elongated pass-through duct formed between a preferably stationary radially outward surface (14) and an outer rotating flow channel (36). The flow channel (36) is contoured between its inlet (34) and outlet (38) to include a supersonic diffuser (40), a combustor (42) and an expansion nozzle (44). Gaseous fuel, or liquid fuel atomized by a fuel slinger (58) within a housing (46), or solid fuel in the form of fine particulates, is inter-mixed with an oxidizer prior to being directed to the flow channel inlets (34). The air and fuel are combusted in the flow channels (36) and exhausted through the rear of the housing (46). A generator (22) can be coupled to a power shaft (18) to convert net shaft power into electricity. Preferably, the rotor (24) and stator (12) are fabricated from a ceramic or other high-temperature material so that combustor exit temperatures (T3) can be operated at highly efficient levels.

High sparking initiator compositions with a controlled amount of power are disclosed. The initiator compositions comprise a metal containing oxidizing agent, at least one metal reducing agent, and a non-explosive binder. Low voltage igniters that provide bidirectional plumes upon ignition are also disclosed. These igniters have a electrically resistive element positioned across a hole in a support which directs the plume. These igniters and compositions are useful in the actuation of solid fuel heating unit, in particular, sealed heating units.

The burner preferably exclusively burns substantially explosible solid fuels and preferably has instant ON-OFF thermostat control, wastes no energy preheating the enclosure or external air supply, achieves stable combustion the moment the powder-air mix is ignited in our burner, is used in the upward vertical mode except for oil burner retrofits, burns a solid fuel in a single-phase regime as if it were a vaporized liquid or gas, is designed to complete combustion within the burner housing itself rather than in a large, high temperature furnace enclosure which it feeds, has an ultra-short residence time requirement, is a recycle consuming burner with self-contained management of initially unburned particles, is much smaller, simpler and lower cost, has a wider dynamic range / turndown ratio, is more efficient in combustion completeness and thermal efficiency, and operates with air-fuel mix approximately at the flame speed.

A method and device for the gasification of solid fuels such as bituminous coals, and cokes such as those from bituminous coals, lignite coals, and biomasses, as well as petroleum cokes, that are ground fine and mixed with water or oil to obtain fuel-in-liquid suspensions, so-called slurries, and their gasification together with an oxidizing medium containing free oxygen, by partial oxidation at pressures between atmospheric pressure and 100 bar, and at temperatures between 1200 and 1900° C. in an entrained flow reactor. The method includes slurry preparation and infeed to the reactor, gasification in an entrained flow reactor with cooled reaction chamber contour, full quenching of the crude gas to saturation temperature that may be 180-260° C. depending on the gasification pressure, and wet or dry dust separation. The crude gas is pretreated so that it can be fed to further technological steps such as crude gas conversion, H2S and CO2 removal, and synthesis.

A method and apparatus are provided for reducing significantly or to zero the waste effluent from a system including a boiler and a wet electrostatic precipitator, the waste effluent comprising blow down water discharged by the boiler during a blow down operation and bleed water discharged by the wet electrostatic precipitator. The method comprises collecting the blow down water, providing the collected blow down water to the wet electrostatic precipitator as a makeup water supplement, evaporating a portion the bleed water and leaving residual bleed water, providing the evaporated bleed water to the wet electrostatic precipitator as a further makeup water supplement, and using the residual bleed water to quench ash produced by combustion of solid fuel by the boiler. The apparatus includes an evaporator that provides direct contact between hot boiler flue gas and the bleed water such that a portion of the flue gas is quenched before being provided to the wet electrostatic precipitator.

The invention relates to a thermal conversion method and a thermal conversion device of solid fuel, wherein the thermal conversion of the solid fuel is composed of three independent and association-controllable sub-processes of pyrolysis, gasification and burning by decoupling the integrated pyrolysis, gasification and burning reactions in the conventional thermal conversion process. A hot carrier substance is circulated among the sub-processes, so that the burning sub-process provides reactive heat to the pyrolysis and the gasification sub-processes and simultaneously provides oxygen to the gasification process to initiate internal burning so as to compensate for the gasification reaction heat that the hot carrier substance is unlikely to supply. Accordingly, the thermal conversion method can control the three thermochemical reactions of pyrolysis, gasification and burning by decoupling, recombination and association to achieve combined production of pyrolysis oil, synthesis gas and heat. Different from conventional single conversion devices for burning, gasification and pyrolysis, the thermal conversion method of the invention has the advantages of compact structure, high heat utilization efficiency and greatly reduced oxygen consumption for synthesis gas production, thus achieving high-value comprehensive conversion and utilization of solid fuels such as brown coal, bituminous coal and biomass.

The present invention relates to melting plate candles which employ heat conductive elements to distribute heat from a burning flame at a wick to a support plate for a solid fuel and to the body of said solid fuel, so as to more rapidly liquify the solid fuel, such as paraffin wax, and to more uniformly and intensely heat such fuels to increase the efficiency of consumption thereof and to more rapidly release volatile materials contained within said fuels. The heat conductive support plate is configured so as to have a capillary lobe upon the surface thereof, which cooperatively engages a wick holder comprising a preferably consumable wick and heat conductive fins which conduct heat from a flame upon said wick to said support plate, said wick holder further engaging said solid fuel, and said support plate being configured so as to cause the flow of liquified fuel to the wick holder. The fuel may be provided in various forms, configured to cooperatively engage said wick holder and support plate, and may comprise various volatile materials. The capillary lobe, in conjunction with the wick holder, causes rapid and complete flow of the liquefied fuel to said wick.

A process for in situ production of shale oil comprises fracturing the target zone 10 of an shale oil formation using a two step approach. First, an initial set of fractures 18 is developed in the formation by using high pressure gas pulses. Second, a secondary set of fractures 28 extending and further fracturing the initial set of fractures 18 is created using a modified ANFO mix 22 wherein rubber particles acting as solid fuel are blended in with ammonium nitrate and fuel oil. The solid fuel enhances the fracturing characteristics of ANFO while minimizing its crushing and compacting tendencies. Hot high pour point oil is then injected into the formation and forced into the receptor well 16 where it is pumped to the surface. By circulating oil in the formation at carefully controlled temperatures, kerogen can be decomposed at the optimum rate to maximize the amount of oil recovered and yield high quality shale oil. High pour point oil reaching cooler extremities of the fractured formation will solidify creating an impermeable perimeter barrier 34 around the target zone 10.

A method for manufacturing a solid fuel includes the steps of partially or completely separating finely powdered coal from pulverized low-rank coal; mixing the separated low-rank coal with a mixed oil containing a heavy oil and a solvent oil to produce an untreated slurry; heating the untreated slurry to dehydrate the low-rank coal and filling the pores of the low-rank coal with the mixed oil; and separating the solid fuel from the heated slurry by solid-liquid separation. The manufacturing method further includes the step of adding the finely powdered coal separated from the low-rank coal to the solid fuel produced by the solid-liquid separation of the heated slurry. The finely powdered coal separated from the low-rank coal has an average particle size of 0.5 mm or less. An apparatus for the manufacturing method is also disclosed.

The invention provides a straw densification briquetting fuel (SDBF) preparation method for biomass power generation and boiler combustion, solving problems of low ash fusion point, easily coking, serious corrosion to boilers and the like of direct straw combustion. In the invention, straw is pre-processed through steam explosion or with diluted acid then is subjected to enzyme hydrolysis with cellulose, and the enzyme hydrolysis residue is briquetted to be used as fuel for biomass power generation or boiler combustion. The pre-processed and enzyme-hydrolysis straw can be briquetted easily; cellulose and hemicellulose in the pre-processed and enzyme-hydrolysis straw are removed basically, lignin content and calorific value increase, potassium ion, sodion and chloridion are removed, thereby improving ash fusion point of straw, reducing coking and boiler corrosion in combustion process, and improving combustion performance of straw. The straw solid fuel prepared by the invention can be used as fuel for common domestic boilers. Sugar produced by enzymolysis can be used as a fermentation carbon source for large-amount fermented products, so as to improve comprehensive utilization value of straw.

A precombustor having a chamber having a first end and a second end, and an inlet configured to deliver a substantially parallel flow of solid fuel surrounded by oxygen at the first end. The first end further includes a recirculation step and the second end fluidly communicates with a furnace. The inlet and the recirculation step are arranged to form a recirculation zone of at least a portion of the solid fuel and the oxygen. A combustion system and method for operating a combustion system are also disclosed.

A hybrid rocket motor is manufactured by photopolymerizing the solid fuel grain in a stereolithography method, wherein fuel grains in a plastic matrix are deposited in layers for building a solid fuel rocket body in three dimensions for improved performance and for a compact design,

A process for the fabrication of a component or component feature for an electrochemical apparatus including providing a printing medium comprising a rapid curable polymer containing carrier and a powder of a component material precursor, printing one of a uniform layer or a pattern of such printing medium on a substrate, and rapidly curing the curable polymer to form a cured part; and the parts made by this process. A process for the fabrication or a multi-layer cell of an SOFC including providing a printing medium comprising a radiation curable polymer containing carrier and a powder of a component material precursor, printing one of a uniform layer or a pattern of such printing medium on a substrate, and radiation curing the curable polymer to form a cured part; and the parts made by this process. The process can use an ultraviolet light curable polymer binder and electrode material powder in an industrial printer to form a solid fuel cell electrode component.