7551results about How to "Extended stay" patented technology

An electrosurgical generator for supplying RF power to an electrosurgical instrument for cutting or vaporising tissue has an RF output stage with RF output devices, a series-resonant output network and an RF output. The generator offers improved cutting and vaporising performance, especially in relation to the reliability with which an arc can be struck when presented with an initial load impedance load. This is achieved by virtue of the output stage being capable of maintaining output pulses of at least 1 kW peak by supplying the RF output devices from a large reservoir capacitor. An appropriate combination of cutting performance and haemostasis is provided by allowing for pulsed or continuous wave operation once an arc has been established, according to whether or not a surplus energy condition exists, as indicated by the voltage across the reservoir capacitor.

Systems and apparatuses include devices, biosensors, environmental sensors, security related sensors, networked products, communications processors and components, alert and information components, processors, and software to support: 1) facilitating medication regimen and patient / user health administration, dosage control, tracking, compliance, information inquiry and presentation, reminder and notification; 2) providing monitoring, information, ordering, and intervention; 3) presenting the option of leveraging the preventative care, alert and notification components with other components to facilitate user or occupant well being, along with living, work area and dwelling environmental or security safety; and 4) enhancing the dwelling, living or work area with products that may be networked to support the widespread acceptance of these systems and apparatuses. The systems include a) processing, centralizing and communicating device commands and / or programs, e.g. a multifunctional device controller; b) device administration; c) patient / user information; d) dwelling environmental safety; e) security breach information; f) centralized and remote apparatus and system activations through primary component or at least one backup.

A shower plate is adapted to be attached to the showerhead and includes a front surface adapted to face the susceptor; and a rear surface opposite to the front surface. The shower plate has multiple apertures each extending from the rear surface to the front surface for passing gas therethrough in this direction, and the shower plate has at least one quadrant section defined by radii, wherein the one quadrant section has an opening ratio of a total volume of openings of all the apertures distributed in the section to a total volume of the one quadrant section, which opening ratio is substantially smaller than an opening ratio of another quadrant section of the shower plate.

A process for catalytic multi-stage hydrogenation of heavy carbonaceous feedstocks using catalytic ebullated bed reactors is operated at selected flow and operating conditions so as to provide improved reactor operations and produce increased yield of lower boiling hydrocarbon liquid and gas products. The disclosed process advantageously takes advantage of an external gas / liquid separation unit associated with the first stage reactor to allow for a more efficient and effective catalytic hydrocracking process. The more efficient process is primarily a result of the increased catalyst loading and lower gas hold-up in the ebullated reactors.

This invention provides novel nanofiber enhanced surface area substrates and structures comprising such substrates for use in various medical devices, as well as methods and uses for such substrates and medical devices. In one particular embodiment, a method of administering a composition to a patient is disclosed which comprises providing a composition-eluting device, said composition-eluting device comprising at least a first surface and a plurality of nanostructures attached to the first surface, and introducing the composition-eluting device into the body of the patient.

A capsule, device, system and method for preparing a liquid food or beverage. The capsule comprises an enclosure containing one or more extractable or infusible ingredients and configured and dimensioned to have a perimeter and be radially symmetrical about a central axis to facilitate rotation; and an opening arrangement that allows liquid food to leave the capsule after passing through the ingredient(s), wherein the opening arrangement is configured and positioned near or upon the perimeter of the enclosure to allow the liquid food to leave the capsule radially due to the application of the centrifugal forces. The method and device introduce liquid into the capsule to form the liquid food while applying centrifugal forces to the capsule to urge the liquid to pass through the ingredient(s).

Embodiments of the present technology may include a method of etching a substrate. The method may include striking a plasma discharge in a plasma region. The method may also include flowing a fluorine-containing precursor into the plasma region to form a plasma effluent. The plasma effluent may flow into a mixing region. The method may further include introducing a hydrogen-and-oxygen-containing compound into the mixing region without first passing the hydrogen-and-oxygen-containing compound into the plasma region. Additionally, the method may include reacting the hydrogen-and-oxygen-containing compound with the plasma effluent in the mixing region to form reaction products. The reaction products may flow through a plurality of openings in a partition to a substrate processing region. The method may also include etching the substrate with the reaction products in the substrate processing region.

A method of treating a subject having a musculoskeletal disorder includes administering to a subject's articular site in need thereof an effective amount of a hyaluronic acid (HA) composition. In one embodiment, the HA composition includes an HA derivative, wherein carboxyl functionalities of the hyaluronic acid derivative are each independently derivatized to include an N-acylurea or 0-acyl isourea, or both N-acylurea and 0-acyl isourea. In another embodiment, the HA composition includes a crosslinked HA gel that is prepared by reacting an uncrosslinked HA with a biscarbodiimide in the presence of pH buffer in a range of between about 4 and about 8. The composite can optionally include at least one second bioactive agent other than the HA derivative, such as a steroid.

A process for the production of a propylene based polymer, the process comprising the following steps: (a) a first polymerization stage comprising homopolymerizing propylene or copolymerizing propylene and at least one alpha-olefin in the presence of an alpha-olefin polymerization catalyst whereby to produce a polypropylene component; (b) a second polymerization stage comprising copolymerizing ethylene and at least one alpha-olefin in the presence of an alpha-olefin polymerization catalyst whereby to produce an ethylene / alpha-olefin copolymer component; and (c) blending the polymer components produced in steps (a) and (b) whereby to produce a polymer blend, wherein the first and second polymerization stages are effected in separate polymerization reactors connected in parallel. Also provided are polymer compositions comprising: (i) 30 to 97% by weight, based on the total weight of the polymer composition, of a propylene based polymer; and (ii) 3 to 70% by weight, preferably 5 to 20% by weight, based on the total weight of the polymer composition, of an ethylene copolymer plastomer (e.g., an ethylene-propylene plastomer) containing at least 60% by weight ethylene.

The invention relates to multi-column sectional drive combined type domestic incinerator. It is set three fire-grates that drying section, burning section, and firing section. The middle fire grate is connected between them. There is altitude fall between them that the drying section is the highest point; the firing one is the lowest point. The primary air chamber is respectively set under them. The incinerator fire grate system of the invention has independent drive mechanism, air supply system, and air chamber for each section which is convenient for controlling technical parameter that traveling speed, air quantity, air temperature, air pressure etc to realize full drying and burning for whole garbage layer.

The present invention provides methods for the large-scale production of recombinant butyrylcholinesterase fused to human serum albumin in cell culture, and in the milk and / or urine of transgenic mammals. The recombinant butyrylcholinesterase-albumin fusion protein of this invention can be used to treat and / or prevent organophosphate pesticide poisoning, nerve gas poisoning, cocaine intoxication, and succinylcholine-induced apnea.

A method to produce on a commercial scale, high aspect ratio cellulose nanofilaments (CNF) from natural lignocellulosic fibers comprises a multi-pass high consistency refining (HCR) of chemical or mechanical fibers using combinations of refining intensity and specific energy. The CNF produced represents a mixture of fine filaments with widths in the submicron and lengths from tens of micrometers to few millimeters. The product has a population of free filaments and filaments bound to the fiber core from which they were produced. The proportion of free and bound filaments is governed in large part by total specific energy applied to the pulp in the refiner, and differs from other cellulose fibrillar materials by their higher aspect ratio and the preserved degree of polymerization (DP) of cellulose, and are excellent additives for the reinforcement of paper, tissue, paperboard and the like. They display exceptional strengthening power for never-dried paper webs.

The invention relates to method and device for gasifying a multi-segment staged converted fluidized bed. The method comprises the following steps of: supplying coal; supplying gas; gasifying; slagging; and conveying fine powder. The device for gasifying the multi-grade staged converted fluidized bed comprises an agglomerating ash separating unit, a pyrolyzing and gasifying reactor of the multi-segment staged fluidized bed and a semicoke fine powder cyclic feeding unit. The invention has the advantages of high volume utilization rate of a gasifying oven, great handling capacity and high utilization rate of total carbon, is suitable for a coal staging and converting system and can be singly used for producing gas for mass coal-based methane synthesis and coal chemical industry.

A system for rehabilitation of a hearing disorder which comprises at least one acoustic sensor for picking up an acoustic signal and converting it into an electrical audio signal, an electronic signal processing unit for audio signal processing and amplification, an electrical power supply unit which supplies individual components of the system with current, and an actuator arrangement which is provided with one or more electroacoustic, electromechanical or purely electrical output-side actuators or any combination of these actuators for stimulation of damaged hearing, wherein the signal processing unit has a speech analysis and recognition module and a speech synthesis module.

A lancing assembly is pivotally coupled to a housing and includes an actuator and a leaf spring carrying a lancet. When the actuator is in its set position, the leaf spring and lancet are in their set position with the leaf spring engaging a catch member of the housing. When the actuator is moved to its actuated position, the leaf spring pivots and deflects against the catch member, thereby storing a drive charge. The leaf spring then releases from the catch member as the stored charge launches the lancet to its lancing position. The leaf spring recharges towards the end of the lancing stroke, which return charge then retracts the lancet back into the housing.

The present invention relates to recombinant adeno-associated virus (rAAV) delivery of an alpha-sarcoglycan gene. The invention provides rAAV products and methods of using the rAAV in the treatment of limb girdle muscular dystrophies such as LGMD2D.

An apparatus for producing a resin coated fiber composite of a rod shape, tubular-shape or plate shape comprises a plurality of first members having an annular shape with a semi-circular ring shaped internal surface, second members having a disc shape with a semicircular ring shaped external surface, first connectors for assembling the first members, second connectors for assembling the second members, an outer die member semi-assembled with the first members and connectors, an inner die member semi-assembled with the second members and connectors, a heater, an inlet nozzle and an outlet nozzle, a zigzag shaped tunnel formed between the inner and outer die members for providing a narrow flow path of the fiber filaments, and resin inlet ports to fill the molten resin in the zigzag shaped tunnel and pressurize the flow path of the fiber filaments. A process for preparing a resin coated fiber composite of a rod-shape, tubular-shape or plate-shape comprises steps of spreading fiber filaments by passing the fiber filaments through a first member having a convex-concave portion to prevent fracture of the fiber filaments, and sequentially tensioning through a series of first and second members all along a narrow flow path to maximize molten resin penetrating surface area, impregnating pressurized molten resin into the fiber filaments continuously by passing the fiber filaments through a series of the first and second members all along the narrow flow path of a zigzag shaped tunnel to maximize molten resin penetrating time, and wherein pressurization of the molten resin maximizes penetration of molten resin into pores of the fiber filaments and minimizes possibility of resin degradation, stranding the resin-coated fiber filaments through a final set of the first members having the convex-concave portion for strengthening the fiber filaments, and integrating and pultruding the resin-coated fiber filaments continuously by passing the fiber filaments all along the narrow flow path of the zigzag shaped tunnel to form a desired diameter through the outlet nozzle.

A PIV window dressing assembly with integral, built-in tubing anchors for the protection of a PIV catheter insertion site is disclosed that is interchangeably usable on both a right or left-hand side insertion site and that resists detachment from a patient's skin during use. The dressing assembly includes a fabric layer that is bounded by an edge. The fabric layer has an adhesive side, an opposite non-adhesive side, and at least one opening therein to allow for viewing therethrough. At least one reinforcement member is disposed between the fabric layer edge and the opening. The reinforcement member is adhered to the fabric layer adhesive side. A transparent film layer having an adhesive skin adhering side and an opposite non-adhesive side closes each of the openings in the fabric layer. The film layer non-adhesive side is adhered to the fabric layer adhesive side.

Cosmetic composition for the treatment of keratin-containing materials, mucosa and teeth, comprising at least one hydrophobin polypeptide sequence (i)(I)Xn-C1-X1-50-C2-X0-5-C3-Xp-C4-X1-100-C5-X1-50-C6-X0-5-C7-X1-50-C8-Xm

A novel method of encapsulating an active substance in a biodegradable polymer, which comprises: a) dissolving said biodegradable polymer in an organic solvent therefor; b1) dispersing said active substance in the organic solution obtained in step a) to provide a dispersion with the active substance as the inner phase thereof; or alternatively b2) emulsifying said active substance, dissolved in water or other aqueous solvent therefor, in the organic solution obtained in step a) to provide an emulsion with the active substance as the inner aqueous phase thereof; and c) subjecting the dispersion obtained in step b1), or alternatively the emulsion obtained in step b2), to an encapsulation operation with an aqueous polyethylene glycol solution as a continuous phase to provide micro- or nanoparticles having the active substance encapsulated therein. Sustained release particles obtainable thereby.

This invention relates to an apparatus for an entrainment system of a vortex burning combustion chamber or a vortex burning inter-turbine burner in a gas turbine. The entrainment system rapidly and thoroughly mixes hot combustion gases with non-combustion gases to reduce the gas temperature before entering a turbine. The entrainment system includes a plurality of helical vanes forming trenches and resulting in a highly helical flow path. The highly helical flow path provides an increased residence time for mixing of the combustion gases and non-combustion gases. Radial cavities in the helical vanes, canted vane angles and varying geometries further facilitate mixing while reducing losses. This invention also includes a method of mixing combustion and non-combustion gases in an entrainment system.

Matrix assisted laser desorption / ionization is performed in a manner to thermalize large analyte ions in a plume of desorbed material for spectroscopic analysis. The thermalized ions have a low or zero mean velocity and are presented at a well-defined instant in time, reducing artifacts and sharpening the spectral peaks. In one embodiment the light is delivered to a matrix or sample holder having a cover, baffle or compartment. The baffle or compartment impedes or contains a plume of desorbed material and the analyte undergoes collisions to lower its mean velocity and directionality. Thus "thermalized" the analyte ions are passed to a mass analysis instrument. In a preferred embodiment an optical fiber butts up against a thin transparent plate on which the specimen resides, with the matrix side in a vacuum acceleration chamber. A mechanical stage moves the specimen in both the x- and y- directions to select a point on the specimen which is to receive the radiation. The use of a fiber optic illuminator allows the entire stage assembly to be subsumed essentially within the dimensions of a conventional stage. In other embodiments, a thermalizing compartment is provided in a capillary tube about the end of the illumination fiber and the sample matrix is deposited along the inner cylindrical wall of the tube, so the capillary forms a migration path to the outlet for thermalization of the desorbed analyte. In other embodiments microstructures having the shape of a small lean-to, overhang or perforated cover plate, or providing a high aspect surface texture, provide the necessary containment to promote thermalization of the released analyte. A thin layer or cover of fibrous or permeable material may also be used to thermalize the analyte before mass analysis, and in other embodiment this material may also act as the substrate. An automated instrument may include a fixed array of illumination fibers which are illuminated at different times to eject samples from a corresponding array of points on the specimen.