Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
Hiro

132results about How to "Optimize footprint" patented technology

Automatic de-stacking and stacking technology and system for putting currency-box into and out of bank exchequer

The automatic de-stacking and piling process and system for entry and exit of money case in the bank exchequer comprises of the entry piling and exit de-stacking; the system comprises of a Cartesian coordinate robot (5) and the fixture (6) at the bottom, with the transverse conveyer (1) and money box conveyer (10) equipped at the lower part of the robot sequentially. Inside the transverse conveyer and under the robot's piling and de-stacking position, there locates an alighting conveyer (12), whose outlet has an vertical conveyer (14) perpendicular to the transverse conveyer that has an check sensor (29) (19) on it. Above or the side of the transverse conveyer and the money box conveyer, separately locate the bar code scanner (13) (9) and the side of money box conveyer close to the robot has a money box regularizing and positioning device and a check sensor (15), (17). It can use the same system to realize the automatic de-stacking and piling operation of money boxes, automatic hand over of money box's entry and exit of the exchequer with high automation level, small occupant area, and quick and accurate de-stacking and piling.
Owner:KUNMING KSEC LOGISTIC INFORMATION IND

Multi-beam scanning lens antenna

The invention provides a multi-beam scanning lens antenna. The medium cylindrical lens is placed between two parallel plate waveguide parallel circular metal plate, the feed array by printing curved planar antenna array on the dielectric substrate, the feed array horizontally in round two the edge of the metal between the parallel plate waveguide with a feed array and between parallel circular metal plate four hex pillars fixed, since the antenna system uses spaced circular parallel plate waveguide structure to achieve a single-mode transmission, arc shaped feed array can be well combined with the circular parallel plate in the horizontal plane with good symmetry, reduces the volume of the pitch surface, and the process is simple, low cost, to achieve a balanced feeding dipoles, avoid adding additional reflector structure, planar microstrip Yagi antenna feed structure occupies less volume, can be well combined with the control circuit.
Owner:NORTHWESTERN POLYTECHNICAL UNIV

All-bomb automatic assembly line

The invention relates to a whole cartridge automatically loading line, which is characterized in that: the whole cartridge automatically load line comprises an exploration-proof room made by three concrete walls and an explosion discharged wall; the concrete wall close to the front is provided with a main loading machine, the front concrete wall is provided with a cartridge transfer window, the outside of the cartridge transfer window is provided with base fire tightening device; the left of the main loading machine is provided with drug weighing machine, the back of the main loading machine is provided with a shot loading robot; the right side of the concrete wall is provided with a shot inlet transfer window, a shot conveyer is arranged between the shot loading robot and the shot inlet transfer window, the outside of the shot inlet transfer window is provided with a shot turntable; the right side of the main loading machine is provided with a rotating robot and a co-bore machine in turn; the right side of the concrete wall is provided with a whole cartridge outlet transfer window, the outside of full-bomb export transfer window is provided with a whole cartridge output unit. The whole cartridge automatically loading line realizes the whole cartridge automatically loading technology through joint control of PLC control module over various function modules, which has a high degree of automation, not only uses fewer workers, but also reduces the labor intensity of workers.
Owner:廊坊智通机器人系统有限公司

Rotary lifting-type three-dimensional garage, vehicle carrying plate docking and lifting device and vehicle parking and getting method

The invention discloses a rotary lifting-type three-dimensional garage which comprises a parking frame, a carrier and vehicle carrying plates. The carrier is provided with a rotary driving device used for driving a carrier upright to rotate, a lifting seat is arranged on the carrier upright, a lifting driving device can drive the lifting seat to ascend and descend along the carrier upright, a lifting block is fixed on the lifting seat, each vehicle carrying plate comprises a vehicle carrying plate body and a sleeve platform, and the lifting block is coincident with each sleeve platform in shape and can be inserted into the same. The invention further discloses a vehicle carrying plate docking and lifting device for the three-dimensional garage. The vehicle carrying plate docking and lifting device comprises the lifting block and the vehicle carrying plates, and by applying the vehicle carrying plate docking and lifting device in the three-dimensional garage, one carrier can be matched with multiple vehicle carrying plates. The invention further discloses a method for parking vehicles in and getting the vehicles from the rotary lifting-type three-dimensional garage. By the structure of the rotary lifting-type three-dimensional garage, parking and getting the vehicles can be completed only through two actions including lifting and rotating.
Owner:周凯旋

Sub-grid adjustable anaerobic-anoxic-aerobic biochemical reactor

The invention discloses a sub-grid adjustable anaerobic-anoxic-aerobic biochemical reactor which is in the form of a covered way and comprises 24 sub-grid tanks (A), wherein the 24 sub-grid tanks (A) are divided into an anaerobic segment, an anoxic segment and an aerobic segment; a trough (B) is formed between every two sub-grid tanks from the first sub-grid tank (A) to the twelfth sub-grid tank (A); division plates (C) are inserted into the troughs (B) to realize the segmentation of the anaerobic segment, the anoxic segment and the aerobic segment; a water passing orifice is formed in the lower part of each trough (B); and an aerator is arranged at the lower part of each sub-grid tank (A) of the reactor. The biochemical reactor is reasonable in design and compact in structure, the relative residence time of the anaerobic segment, the anoxic segment and the aerobic segment can be flexibly adjusted according to the water quality condition of waste water to be treated, and when different waste water is treated or the water quality of the waste water to be treated is changed, the anaerobic segment, the anoxic segment and the aerobic segment can perform efficient biochemical treatment, so that the reactor can obtain an overall stable and efficient treatment effect and has good environmental and economic benefits.
Owner:YANCHENG INST OF TECH

Treatment methods of landfill leachate and treatment systems thereof

The invention belongs to multiple-stage treatment methods of waste water and treatment systems thereof, and particularly discloses treatment methods of landfill leachate and treatment systems thereof. One of the treatment methods comprises the following steps of: firstly, mixing the landfill leachate and anaerobic sludge to perform complete reaction; secondly, performing electrochemical reaction to obtain flocs and initially depositing effluent water; finally, adjusting the pH value, adding Fenton reagents and mixing the effluent water and aerobic sludge after the complete reaction between the Fenton reagents and the leachate in a later phase. In the other method of the invention, the mixing and reaction between the leachate in the initial phase and the aerobic sludge are performed before the electrochemical reaction and other steps are the same. The invention also provides two different treatment systems for the two different treatment methods. The systems are formed by optimally combining a pre-treatment tank, an anaerobi reaction tank, an electrochemical reaction tank, a deposition tank, an oxidation tank, a regulating tank, a biochemical reaction tank and a sludge concentration tank. The treatment methods have the advantages of wide application range, small influence of environment, low operation cost, good treatment effect and the like.
Owner:CHANGSHA HASKY ENVIRONMENTAL PROTECTION TECH DEV CO LTD

Tobacco leaf cut-tobacco-making pretreating process and production line

The present invention relates to a pretreatment process for making tobacco shreds by using tobacco leaf and its production line. Said pretreatment process includes the following procedures: tobacco bale charging, stacking, cutting packaging band and recovering said packaging band, stacking broken tobacco bale, microwave heating, loosening and killing insects, stacking loosened tobacco bale, opening bale and loosely feeding material. Said production line includes several conveyer equipments, microwave heating, loosening and insects-killing equipment, bale-breaking and bale-opening equipment, packaging band cutting and recovering equipment and loosely material-feeding equipment, etc.
Owner:YUNNAN KUNMING SHIPBUILDING DESIGN & RESEARCH INSTITUTE

Bipolar complementary metal oxide semiconductor (BiCMOS) current-type reference circuit

The invention discloses a bipolar complementary metal oxide semiconductor (BiCMOS) current-type reference circuit. The BiCMOS current-type reference circuit comprises a reference nuclear circuit, a starting circuit and a reference current output circuit, wherein the reference nuclear circuit consists of three parts, namely a current mirror circuit, a positive temperature coefficient current generating circuit and a negative temperature coefficient current generating circuit; the current mirror circuit is used for generating a matched branch circuit, and a reference current which is obtained by adding a positive temperature coefficient current to a negative temperature coefficient current according to a certain proportion and has the temperature coefficient of zero at the normal temperature; the starting circuit is used for starting the reference nuclear circuit when the power is turned on; and the reference current output circuit is used for outputting the reference current generated by the reference nuclear circuit according to a proportion. Compared with the conventional voltage-type reference circuit, the BiCMOS current-type reference circuit has the advantages that the BiCMOS current-type reference circuit is not influenced by power supply network direct-current voltage drop, the transmission loss is low, the matching performance is high, the temperature stability is high, the occupied area of a chip is small, the circuit is self-started when the power is turned on and the like because of the adoption of a current transmission method, and is particularly suitable for the places with very stringent requirement of an analogue-to-digital / digital-to-analogue converter on reference signals.
Owner:CHONGQING GIGACHIP TECH CO LTD

Integrated small and medium multi-point water inflowing deep nitrogen and phosphorus removal sewage processing system and processing method

The invention discloses an integrated small and medium multi-point water inflowing deep nitrogen and phosphorus removal sewage processing system and a processing method. The system and method are mainly used for processing high-concentration town sanitary sewage and high-concentration industrial waste water, especially COD, sanitary sewage with high ammonia nitrogen content or industrial waste water. The processing system comprises a grating adjusting pond, an aeration tank, a first anoxic pond, a first aerobic pond, a second anoxic pond, a second aerobic pond, a precipitating pond, a flocculation reaction pond and a flocculation precipitating pond which are successively communicated. The multi-point water inflowing mode is adopted, water resources are reasonably utilized, and the system has the advantages of being low in cost, efficient, capable of resisting loading and impacting, stable in quality of discharged water, convenient to operate and manage, and beneficial for integrated construction and saving of occupied area.
Owner:中原环保郑州设备工程科技有限公司

Semi-physical training system for mounting and debugging of electrical control circuits of portal cranes and bridge cranes

The invention provides a semi-physical training system for mounting and debugging of electrical control circuits of portal cranes and bridge cranes. The system is composed of a crane operation device,a crane electrical control cabinet (comprising an electrical control system of the crane), a substitutional motor and substitutional motor rotary encoder module, a virtual scene signal feedback assembly, a data exchange assembly, an analog computer assembly, and a display and sound assembly. The computer graphic processing technology is adopted, the mechanical structure is subjected to computer virtualization, and the floor area is small. The semi-physical form is adopted, the electrical control system of the crane adopts the real device, the practical-operation-like training can be carried out aiming at the relevant skills of mounting, debugging and repairing and maintenance of the electrical control systems of the portal hoisting devices and bridge hoisting devices, both the skill training effect and resource investment are considered, and the truth degree of skill training is relatively high.
Owner:李力

Underground comprehensive pipe gallery

The invention relates to an underground comprehensive pipe gallery. The underground comprehensive pipe gallery comprises a high-position gallery body and a low-position gallery body which are constructed under the ground. The high-position gallery body is divided into ventilating rooms, an escape channel, a power distribution room and a feeding room through first partition walls. A plurality of first inlets and outlets are formed in the first partition walls and communicate the ventilating rooms, the escape channel, the power distribution room and the feeding room. The top of each ventilating room is provided with a ventilating opening and a ventilating structure which are exposed out of the ground. The top of the escape channel is provided with an escape opening and an escape well cover which are exposed out of the ground. The top of the feeding room is provided with upper feeding openings and feeding cover plates which are exposed out of the ground. Second inlets and outlets communicating with the low-position gallery body are formed in the bottoms of the ventilating rooms, the escape channel and / or the feeding room. The low-position gallery body is internally provided with a pipeline cabin and a cable cabin. A drainage structure is arranged at the bottoms of the pipeline cabin and the cable cabin. The pipeline cabin is divided into a plurality of sub pipeline cabin bodies. The cable cabin is divided into a plurality of sub cable cabin bodies. The underground comprehensive pipe gallery is small in occupied area, convenient to install and maintain and high in management efficiency.
Owner:BERIS ENG & RES CORP

Deep treatment process and device for municipal wastewater treatment upgrading

The invention relates to the technical field of environmental pollution control and municipal-engineering wastewater treatment. The invention provides a deep treatment device for municipal wastewatertreatment upgrading. The device includes a denitrifying biological filtering tank, a nitrifying biological filter tank or an aerated biological filter tank, a magnetic coagulation sedimentation device, a filter-cloth filter tank or a turntable filter tank device and a disinfection tank. The denitrifying biological filtering tank is provided with a matched carbon source feeding device, and the magnetic coagulation sedimentation device is provided with a matched separator (namely a high shearing machine). The device has the multi-level deep filtering functions owing to the denitrifying biological filtering tank, the nitrifying biological filtering tank (or aerated biological filter tank), the magnetic coagulation sedimentation device and the filter-cloth filter tank (or the turntable filtertank), and thus can effectively remove various pollutants such as CODCr, BOD5, ammonia nitrogen, total nitrogen, total phosphorus, suspended solids and other pollutants in wastewater.
Owner:江苏金博源环保科技有限公司

Sewage treatment method

The invention provides a sewage treatment method which comprises steps as follows: a sewage blockage grid traps large suspended substances or floating substances in sewage, and a regulating tank regulates the water quantity and water quality of the sewage and performs preliminary precipitation; the sewage and aerobic zone reflux mixed liquor together pass through an anoxic zone to perform denitrification treatment, and pass through an aerobic zone to remove organic substances in the sewage, and the mixed liquor of the aerobic zone flows back to the anoxic zone through air stripping; and phosphorus is removed from the residual sewage after air stripping by adding an aluminum salt with a preset concentration and adopting a mixed feed zone using perforated aeration stirring, and the sewage which has passed through the mixed feed zone passes through a settling zone to perform sludge-water separation. The invention can simultaneously remove nitrogen and phosphorus in the sewage and implement low sludge yield; and the invention has the characteristic of small occupied area, is simple top operate and maintain, conforms to the requirements of the countryside for technical rationality and economical efficiency, and has wide application prospects.
Owner:SOUNDGRP CO LTD

Semiconductor device and electric contact structure and manufacturing method thereof

The invention provides a semiconductor device and an electric contact structure and a manufacturing method thereof. At least a first contact plug closest to a peripheral region in a core region is formed above an isolation structure at the junction of the core region and the peripheral region and is in contact with the isolation structure; the bottom of the first contact plug can be completely overlapped on the isolation structure; or, a part of the bottom is overlapped with the isolation structure; the bottom of the other part is overlapped with the active region close to the core region of the isolation structure; and even the top of the first contact plug is at least connected with the top of the contact plug close to the upper part of the active region of the core region of the isolation structure, so that the electrical structure originally formed on the outermost side of the boundary of the core region can be at least partially formed above the isolation structure at the junction, the consistency of the electrical structure above the contact plug in the core region is ensured, and the performance of the electrical structure on the boundary of the core region is ensured.
Owner:FUJIAN JINHUA INTEGRATED CIRCUIT CO LTD

Calcining method for belt sintering machine

InactiveCN1776337ALow costIncreased sintering throughputFurnace typesGaseous fuel burnerSmall footprintEngineering
Under stable supply, coal gas is fired to burn materiel on lead sinter machine. Through gas pipe, coal gas generated from gas generator is entered to cyclone dust collector. Through gas pipe, dust removed coal gas is entered to branch pipe. Through air pipe, comburant air enters into branch pipe. After branch pipe for coal gas and branch pipe for comburant air are connected to each other, and led to burner, where gas and air are mixed fully in volume ration being about 1:1. Through the burner, mixed gas burns in firebox of ignition furnace. Advantages are: lowering cost by using gas to replace heavy oil, better controlling fire behavior, and good effect for baking materiel.
Owner:HENAN YUGUANG GOLD & LEAD

Sludge dewatering and concentration treatment fundamental technology

The invention discloses a sludge dewatering and concentration treatment fundamental technology. The sludge dewatering and concentration treatment fundamental technology comprises the steps of a first-grade wastewater treatment core process, middle assisting, a second-grade wastewater treatment core process and post assisting, controlling is conducted on the pH value based on all processing point water bodies in an overall process, and all parameters are set according to requirements of water inflow and outflow indexes. According to the sludge dewatering and concentration treatment fundamental technology, the advantages of ion separation medicament in practical application for an applicant can be fully guaranteed, and the representative advantages that the quantity of reagent (10-300 g per ton of water) is less, dilution is not needed for direct solid state dosage, buffering is not needed for wastewater real-time treatment (the reaction speed ranges from 3 min to 15 min), water content removal rate reaches up to over 80 percent, all national wastewater treatment emission standards can be accorded to and met, treated water is colorless, odorless and free of secondary harmful chemicals, and sludge produced through flocculation is low in moisture content (smaller than 35 percent), free of odor and adhesion and the like.
Owner:周朝晖

Positioning apparatus for container forming machine

The present invention provides an apparatus for use in a container forming machine that alters the path of a partially-formed container in a particular direction while independently rotating the partially-formed container itself to a selected angle or position. The apparatus may be incorporated into any container forming machine as an alternative to the traditional unidirectional conveying means. In one embodiment, the apparatus of the present invention allows the path of container formation inside the machine to double back against itself in a U-turn (180 degrees), thereby reducing the overall footprint of the machine, while at the same time positioning the partially-formed container for further formation activity by rotating the container itself only 90 degrees. In another embodiment, an apparatus is provided that raises or opens the partially-formed container as it travels along the altered path.
Owner:MOSHIER JAMES +2

Power generation device with two mobile parts

The invention relates to a power generation device (1) that includes an excitation coil (2) with a central opening, and a magnetic circuit (3) extending through the central opening of the coil and including at least one permanent magnet (4a, 4b, 6) and a plurality of ferromagnetic members (33, 34, 32, 40) arranged in a fixed portion and two mobile portions (30a, 30b), characterized in that the two mobile portions (30a, 30b) are mounted on two parallel rotary axes and can each assume two positions, in that the device includes means for rotating (5, 50) the two mobile portions (30a, 30b) between the two positions thereof so as to create two states of the magnetic circuit (3), i.e. a first state in which a magnetic flow (F1) flows through the coil in one direction and a second state in whicha magnetic flow (F2) flows through the coil in the opposite direction.
Owner:SCHNEIDER ELECTRIC IND SAS

Assembled membrane bioreactor

The invention discloses an assembled membrane bioreactor. The membrane bioreactor is formed by splicing multiple functional tank bodies communicated through a pipeline, wherein each functional tank body comprises a regulating pool functional tank body, an aerobic pool functional tank body, an anoxic pool functional tank body, and a functional tank body used as a control room; the aerobic pool functional tank bodies and the anoxic pool functional tank bodies are orderly and alternatively arranged in a matrix way. The membrane bioreactor disclosed by the invention is formed by splicing the multiple functional tank bodies, and the number of the aerobic pool functional tank body or the anoxic pool functional tank body can be properly added or reduced and the arrangement way of the aerobic pool functional tank bodies or the anoxic pool functional tank bodies can be changed according to actual demand and water depth demand of the engineering, thereby realizing the regulation of sewage handling capacity, and the field installation is convenient, and the transportation is convenient; a multi-layer membrane component is used in the membrane bioreactor, compared with a single-layer membrane component with the same membrane element number, the floor area of the membrane component is greatly reduced in the premise of guaranteeing the effluent effect; the floor area is reduced by 50%, an aeration rate is reduced by 36%, and the energy consumption and the economic cost are effectively saved.
Owner:南京瑞洁特膜分离科技有限公司

Biological purification tank used for sewage treatment

The invention provides a biological purification tank used for sewage treatment. The biological purification tank used for the sewage treatment comprises an inner-layer tank body, a middle-layer tankbody, an outer-layer tank body, a water inlet pipe, a water outlet pipe, a gas stripping return pipe, an aerator pipe and a gas inlet pipe. According to the biological purification tank, sewage entersthe biological purification tank from bottom of an anaerobic region and flows upward, then enters an aerobic region from a deflector hole and flows downward and then enters a settling zone and then flows upward, finally purified water flows out from the water outlet pipe, the sewage advances in an up-down bending-flow manner in the biological purification tank, stroke is long, retention time of hydraulic power is long, water flow direction in an aeration zone is opposite to aeration airflow direction, a contact surface between an aqueous phase and a gas phase is larger, and aeration is more uniform; the three tanks are concentrically sheathed and stacked together and are vertical tank bodies, so that occupying area is smaller than that of other types of sewage equipment after the biological purification tank is buried underground; and the biological purification tank provided by the invention is small decentralized sewage treatment equipment applicable to a place where less amount ofsewage is produced every day, small in occupying area, good in treatment effect, easy to operate and low in power consumption.
Owner:青岛沃安环境科技有限公司

Spherical self-service intelligent rest cabin

The invention discloses a spherical self-service intelligent rest cabin. The spherical self-service intelligent rest cabin comprises a rest cabin provided with an intelligent system and an intelligentlock, a remote information service center, and a use terminal software. The rest cabin is composed of a cabin body and a cabin door. The cabin body is connected with the cabin door by a rotating shaft device. The intelligent system is arranged on the lateral wall of the cabin body. The intelligent system is provided with a wireless transmission device. The use terminal software scans a two-dimension code of the intelligent system to be remotely connected with the remote information service center. The spherical self-service intelligent rest cabin has the beneficial effects that when the restcabin is not in use, the cabin door is closed to form a sealed structure, and when the rest cabin is in use, the cabin door is opened to form a semi-sealing state; the rest cabin improves the restingenvironment in the cabin, guarantees resting safety and breathability in the cabin, and effectively lowers external noise and light interference; in addition, a foot stool is arranged, so that the actual use space during resting is effectively enlarged; and improvement is achieved in cabin body weight and occupied area, and application and popularization of the rest cabin are facilitated.
Owner:李东强

Biochemical treatment and sedimentation integrated backflow type active sludge biochemical treatment device

The invention relates to a biochemical treatment and sedimentation integrated backflow type active sludge biochemical treatment device, which comprises a cylindrical shell and a high-efficiency aerator, wherein a backflow cylinder with open upper and lower ends is arranged in the shell, an interspace for forming a sedimentation overflow area is reserved between the upper end of the backflow cylinder and the top of the shell, an interspace for forming a sludge area is reserved between the lower end of the backflow cylinder and the bottom of the shell, an interspace for forming a rotational flow passage is reserved between the outer wall of the backflow cylinder and the inner wall of the shell, a jet pipe of the high-efficiency aerator is connected into the shell along the tangential direction of the shell and is communicated with the space inside the shell, and the joint part corresponds to the lower part of the backflow cylinder. The biochemical treatment and sedimentation integrated backflow type active sludge biochemical treatment device forms backflows in the shell, effectively improves the mixed mass transferring capacity, has high active sludge concentration and good purification effect, allows deeper water depth, and is mainly applied to the aerobic biochemical treatment of organic sewage.
Owner:HAISIBOTE BEIJING SCIENE & TECH

Motor vehicle having an electromotive unit and the power supply module thereof arranged in the vicinity of a running gear of the vehicle

The invention relates to a vehicle (2), particularly a motor vehicle, comprising at least one electromotive drive unit (23) and a power supply module (37) capable of supplying the electromotive drive unit (23), a running gear (5) mechanically coupled to the electromotive unit (23), and a chassis (18) attached to the body (1) of the vehicle (2), in the vicinity of the running gear (5), onto which the electromotive unit (23) and the power supply module (37) are attached, characterized in that the chassis (23) defines a platform attached below the body (1) of the vehicle (2), between the body (1) of the vehicle and a floor (P) separating a useful space of the vehicle (2) which is part of the passenger compartment or adjacent to the passenger compartment, and in that the chassis (18) is capable of receiving and supporting the electromotive unit (23) and the power supply module (37), wherein the electromotive unit (23) and the power supply module (37) are arranged on either side of the chassis (18).
Owner:PEZHO SITROEN AUTOMOBILS SA

Glycyrrhiza extracting solution clarification and concentration membrane system

The invention discloses a glycyrrhiza extracting solution clarification and concentration membrane system. The glycyrrhiza extracting solution clarification and concentrated membrane system comprises a ceramic membrane clarification system and an RO (reverse osmosis) membrane concentrating system which are connected by a conveying pipeline; a glycyrrhiza crude extracting solution is pumped into the ceramic membrane clarification system for membrane system internal circulation to obtain a glycyrrhiza clarification solution; the obtained glycyrrhiza clarification solution is pumped into the RO membrane concentrating system by the conveying pipeline for concentration processing of the membrane system internal circulation to obtain dialysate; the dialysate enters a dialysate storage tank, and returns to the previous glycyrrhiza extracting working procedure for recycling; a concentration solution enters a concentration solution tank for subsequent processing treatment. The glycyrrhiza extracting solution clarification and concentration membrane system provided by the invention removes residual impurities in the glycyrrhiza extracting solution by utilizing the ceramic membrane clarification system so as to enrich effective ingredients; the RO membrane concentration system further purify and concentrate the clarification solution to obtain the high-quality glycyrrhiza concentration solution; the system operates at the normal temperature, has little loss of effective ingredients, and has no chemical change, and a product is not polluted because of the physical separation process.
Owner:新疆鹏弘生物科技有限公司 +1

Hydraulic power automation water treatment aeration cycle system

The invention discloses a hydraulic power automation water treatment aeration cycle system, comprising a water pump communicated with one side of a reservoir; the water outlet of the water pump is successively communicated with a high-speed composite filter material filter, an aeration tank, a gravity-type drug dissolving device and a sterilizer inlet tee joint via a pipeline, wherein one outlet of the sterilizer inlet tee joint is communicated and provided with a water return pipeline, and the other outlet of the sterilizer inlet tee joint is communicated and provided with a photocatalyst biocide device of which the outlet is communicated and provided with a sterilizer outlet tee joint; the sterilizer outlet tee joint is connected on the water return pipeline in series by other two ports; the water return pipeline between the sterilizer inlet tee joint and the sterilizer outlet tee joint is provided with a valve; the valve is respectively connected in series between the photocatalyst biocide device and the sterilizer inlet tee joint as well as between the photocatalyst biocide device and the sterilizer outlet tee joint; and the water return pipeline is communicated with the reservoir. The invention has simple structure, small floor area, high degree of automation and small later-stage maintenance workload and is suitable for circulating water treatment of water works, swimming pools, bathing beaches, lakes, waterscape, ornamental fish ponds and the like.
Owner:郑州浪鲸泳池设备制造有限公司

Spherical vertical-door-opening self-service intelligent rest cabin

Disclosed is a spherical vertical-door-opening self-service intelligent rest cabin. The rest cabin comprises a rest cabin body provided with an intelligent system and an intelligent lock, a remote information service center and use terminal software; the rest cabin body is composed of a cabin body and a cabin door, and the cabin body is connected with the cabin door through a rotating shaft. The rest cabin has the advantages that when the rest cabin is idle, the cabin door is closed to be of a closed structure, during a rest, the cabin door is opened and is in a semi-closed state, the rest cabin improves the rest environment in the cabin, the safety and air permeability for the rest in the cabin are ensured at the same time, and the external noise and light interference are effectively reduced; in addition, through the design of a foot placement stool, the actual use space for the rest is effectively extended, and through the design of a sole massager, relaxing convenience is providedfor a user; meanwhile, the weight and floor space of the cabin body are improved, and the use and popularization of the rest cabin are facilitated.
Owner:李东强

Quasi-ideal iron core and electromagnetic conversion device using same

InactiveCN103680839ALow magnetic saturationLow Electromagnetic Conversion EfficiencyTransformers/inductances coils/windings/connectionsTransformers/inductances magnetic coresForce linesSuperconducting Coils
The invention relates to a quasi-ideal iron core, an electromagnetic conversion device using the same, and a method for producing the iron core and relates to the technical field of electromagnetism. Iron cores in prior art are of rectangular or annular frame structures, iron yoke portions coat coils or coils are bared in external space, magnetic leakage and electromagnetic vortex are large, the magnetic saturation value is low, and electromagnetic conversion efficiency is low. The quasi-ideal iron core is an equal magnetic flux section three-dimensional axisymmetric body or rotation body, an iron yoke coats and surrounds a coil without an air gap, a magnetic circuit is in smooth transition, and all magnetic force lines generated by the coil are directly incorporated into magnetic flux of the iron core, so that magnetic leakage and electromagnetic vortex of the iron core are furthest reduced, electromagnetic conversion efficiency and magnetic saturation values are high, high magnetic field intensity can be achieved by matching a superconducting coil with the iron core, and meanwhile, a production process for the equal magnetic flux section air-gap-free quasi-ideal iron core is disclosed; the iron core can be widely applied to occasions where equal electromagnetism generated by general and ultra-strong magnetic fields is converted.
Owner:杜臣

Treatment methods of landfill leachate and treatment systems thereof

The invention belongs to multiple-stage treatment methods of waste water and treatment systems thereof, and particularly discloses treatment methods of landfill leachate and treatment systems thereof. One of the treatment methods comprises the following steps of: firstly, mixing the landfill leachate and anaerobic sludge to perform complete reaction; secondly, performing electrochemical reaction to obtain flocs and initially depositing effluent water; finally, adjusting the pH value, adding Fenton reagents and mixing the effluent water and aerobic sludge after the complete reaction between the Fenton reagents and the leachate in a later phase. In the other method of the invention, the mixing and reaction between the leachate in the initial phase and the aerobic sludge are performed beforethe electrochemical reaction and other steps are the same. The invention also provides two different treatment systems for the two different treatment methods. The systems are formed by optimally combining a pre-treatment tank, an anaerobi reaction tank, an electrochemical reaction tank, a deposition tank, an oxidation tank, a regulating tank, a biochemical reaction tank and a sludge concentration tank. The treatment methods have the advantages of wide application range, small influence of environment, low operation cost, good treatment effect and the like.
Owner:CHANGSHA HASKY ENVIRONMENTAL PROTECTION TECH DEV CO LTD

Three-in-one gas cooling device

A three-in-one gas cooling device comprise a cooling barrel, a cooling assembly, an inlet pipe and an outlet pipe, wherein the cooling assembly is arranged in the cooling barrel; the inlet pipe and the outlet pipe are arranged on the cooling barrel; the cooling barrel comprises a shell and an inner barrel which is arranged inside the shell; the cooling assembly comprises a buffer room and a heat exchange cooling assembly; the buffer room is arranged between the shell and the inner barrel and is connected with the inlet pipe; the heat exchange cooling assembly is arranged inside the inner barrel; an inlet box which is communicated with the buffer room is arranged at one side of the shell; the inlet box is corresponding to the other end of the heat exchange cooling assembly; a separation room is arranged at the other side of the shell; and the separation room is connected with the outlet pipe and is corresponding to the other end of the heat exchange cooling assembly. According to the invention, a buffer, a cooler and a separator which are independent with one another in the traditional gas cooling device are integrated into one apparatus, so that the three-in-one gas cooling device has a huge improvement in comparison with the traditional apparatus in the size of the apparatus, the occupied area and metal consumption.
Owner:HUNAN ZHONGDA MECHANICAL & ELECTRICAL

Valve external cooling system achieving cooling with seawater

The invention relates to a valve external cooling system achieving cooling with seawater. The system comprises a raw water obtaining system, a heat exchange system, a water circulation system and a converter valve. The raw water obtaining system guides the seawater into the converter valve to be stored as a heat exchange medium. The heat exchange system conducts heat exchange between the heat exchange medium in the converter valve and the seawater. The water circulation system conveys the seawater into the converter valve and the heat exchange system in a circulating mode. The raw material obtaining system comprises a raw water pump, a seawater conveying pipeline, a filtering pond and a pond. One end of the seawater conveying pipeline is arranged in the sea, the other end of the seawater conveying pipeline is connected with the inlet end of the filtering pond through the raw water pump, the outlet end of the filtering pond is connected with an inlet of the pond through the seawater conveying pipeline, and filtered seawater is stored in the pond. The valve external cooling system can effectively save fresh water resources and is good in cooling effect.
Owner:STATE GRID CORP OF CHINA +3
Who we serve
  • R&D Engineer
  • R&D Manager
  • IP Professional
Why Eureka
  • Industry Leading Data Capabilities
  • Powerful AI technology
  • Patent DNA Extraction
Social media
Eureka Blog
Learn More
PatSnap group products