1645 results about "Night vision" patented technology

An alerting system for fire stations utilizes programmable message centers, zone-coded lighting and audio modules to alert only selected personnel for a particular type of emergency, i.e. fire, medical, etc. to decrease response time while reducing stress to remaining personnel who need not be alerted. Related features include night vision lighting, low level lighting, remote sensing and activation of station doors, ceiling mounted lighting signals, bed proximity audio alerts, automatic control of Emergency Response Facility audio sources and daisy-chain Ethernet cabling for simple installation.

A system mountable in a motor vehicle. The system includes a camera and a processor configured to receive image data from the camera. The camera includes a rolling shutter configured to capture the image data during a frame period and to scan and to read the image data into multiple image frames. A near infra-red illuminator may be configured to provide a near infra-red illumination cone in the field of view of the camera. The near infrared illumination oscillates with an illumination period. A synchronization mechanism may be configured to synchronize the illumination period to the frame period of the rolling shutter. The frame period may be selected so that the synchronization mechanism provides a spatial profile of the near infra-red illumination cone which may be substantially aligned vertically to a specific region, e.g. near the center of the image frame.

A vehicle mounted imaging system and method, enabling selective imaging of objects in a low-visibility environment. The system includes a light source providing non-visible light pulses and a camera having an image intensifier enabled to gate selected received images. The light source may be a laser generator, which may be enabled to generate a pulse width related to the depth of a field to be imaged. The gated image intensifier may determine gating time spans according to the depth of a field to be imaged.

A MOS or CMOS sensor for high performance imaging in broad spectral ranges including portions of the infrared spectral band. These broad spectral ranges may also include portions or all of the visible spectrum, therefore the sensor has both daylight and night vision capabilities. The sensor includes a continuous multi-layer photodiode structure on a many pixel MOS or CMOS readout array where the photodiode structure is chosen to include responses in the near infrared spectral ranges. A preferred embodiment incorporates a microcrystalline copper indium diselenide / cadmium sulfide photodiode structure on a CMOS readout array. An alternate preferred embodiment incorporates a microcrystalline silicon germanium photodiode structure on a CMOS readout array. Each of these embodiments provides night vision with image performance that greatly surpasses the GEN III night vision technology in terms of enhanced sensitivity, pixel size and pixel count. Further advantages of the invention include low electrical bias voltages, low power consumption, compact packaging, and radiation hardness. In special preferred embodiments CMOS stitching technology is used to provide multi-million pixel focal plane array sensors. One embodiments of the invention made without stitching is a two-million pixel sensor. Other preferred embodiments available using stitching techniques include sensors with 250 million (or more) pixels fabricated on a single wafer. A particular application of these very high pixel count sensors is as a focal plane array for a rapid beam steering telescope in a low earth orbit satellite useful for tracking over a 1500-meter wide track with a resolution of 0.3 meter.

A fuel cell system is described for providing primary and / or auxiliary / backup power to one or more loads selected from the group comprising: lawn & garden equipment; radios; telephone; targeting equipment; battery rechargers; laptops; communications devices; sensors; night vision equipment; camping equipment; stoves; lanterns; lights; vehicles; cars; recreational vehicles; trucks; boats; ferries; motorcycles; motorized scooters; forklifts; golf carts; lawnmowers; industrial carts; passenger carts (airport); luggage handling equipment (airports); airplanes; lighter than air crafts; blimps; dirigibles; hovercrafts; trains; locomotives; submarines (manned and unmanned); torpedoes; security systems; electrical energy storage devices for solar-based, tidal-based, hydro-based, wind-based, and other renewable energy source; equipment for which a primary and / or backup power source is necessary or desirable to enable the equipment to function for its intended purpose, military-usable variants of above, and suitable combinations of any two or more thereof. The system provides power to the one or more loads upon the occurrence of a power outage condition, which includes a disruption or discontinuation in the delivery of primary power (i.e., power from a system-external primary source, namely, a source other than the fuel cell system) to, or power demand condition by, the one or more loads. A controller senses outage of primary power to, or demand for primary power by, the one or more loads, and, responsive thereto, operatively engages one or more fuel cells to provide power to the one or more loads.

A vehicle-borne camera-based observation system for monitoring areas adjacent a vehicle or passenger vehicle, such as a bus or schoolbus, is disclosed, to provide safer operation for passersby, including for children, and driver convenience. The system includes several cameras, and several monitors in a driver's area displaying all of the fields of view from the cameras, such that each monitor may be controllable to show either the field of view of a first camera or a the field of view of a second camera, according to a driver selection or according to an automatic selection. Night vision, automatic tracking, and illumination systems are also provided.

A vision system for a vehicle includes a light source generating an illumination beam, a receiver having a pixel array for capturing an image in response to at least a reflected portion of the illumination beam, the image corresponding to a first horizontal field of view (FOV) angle, and a controller coupled to the light source and the receiver. The controller receives a vehicle speed input and, in response, selects a portion of the image as a non-linear function of the vehicle speed to generate a second horizontal FOV angle for displaying to the vehicle operator. The displayed angular FOV decreases, non-linearly, as the vehicle speed increases.

A Light device having built-in Camera to operate desire digital data functions is powered by an power source for a lamp-holder, light source, flashlight or light device connected to power source by prongs or a bulb-base with conductive contacts to get power. The device may take the form of an IP cam, or Driving Cam, or webcam having but not limited add for auto tracking or one of plurality functions to make different products and functions with optional retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, APP communication unit, motion sensor, light device. The said motion sensor and digital data related device(s) including but not limited all kind of camera may in separated housing with night-vision assembly selected from light source, IR diodes, low light camera lens & IC & circuits so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light. The motion sensor head or PIR has digital data output to work with wireless communication parts to avoid the analog model for mutual interfere the signals to cause false functions of light source or wifi or APP or wireless related functions.

The e-Mirrors system promotes a new standard of driving safety views device, which upgrade regular glass mirrors from optical reflective to optoelectronic. The e-Mirrors system overcomes lots problems of conventional mirrors: blind spots, poor rear view, poor object approaching view etc. Variety new design vehicles made in the century 21 need higher standard safety view devices to drive in more & more crowded traffic system since population is growing rapidly. Time to change! Trend to go optoelectronic safety view. The e-Mirrors system integrates ultra night vision multi micro CCD cameras, high definition low distortion Lens, multiple mini LCD panels, New concept design camera mounts, video processor (or switch) all in 1. Each component apply unique design, each view setting has its technique. Using e-Mirrors to fill the absence of central rear mirror in trucks and buses large vehicles, drivers will be stress free. Driving everyday becomes easy, safely and fun! After tested in many vehicles, this e-Mirrors system proofs the most creative and the state of the art safety device since the invention of airbag. Its application will significantly reduce the traffic accidents causing by driver's “did not see it” error every year. Airbags now are legal mandatory devices for motor vehicles. However, airbags deploy to reduce lost of lives only after the collision, not able to reduce traffic accidents. Wish this handy e-mirrors system, cost less than airbags, be the second mandatory device for all vehicles soon!

The disclosure is directed to a full color liquid crystal display system providing compatibility with Class A night vision imaging goggles. One embodiment of the invention is directed to a color liquid crystal display (LCD) having dual modes of operation. The color LCD display includes a normal mode light source, a liquid crystal display stack positioned so as to receive light from the normal mode light source, and a night vision imaging system (NVIS) mode light source. The NVIS mode light source includes a NVIS mode white light source, a NVIS mode red light source, a NVIS filter receiving light from both the NVIS mode white light source and the NVIS mode red light source, and a waveguide receiving light from the NVIS filter for reflection to the LCD stack.

The invention provides a night-vision imaging apparatus including: a light emission unit that emits infrared light; a solid-state imaging device that converts the infrared light into a first signal; a light-emission control unit that allows the light emission unit to emit the infrared light which is modulated according to a temporally pseudo-random first modulation; and an extraction unit that extracts, according to the first modulation, a signal corresponding to the infrared light emitted by the light emission unit from the first signal.

The invention has an active touch-sensitive transparent layer over a display screen (LCD) in which an electrically responsive material, such as silicon oil or the above-described material is trapped in a very thin layer with a diode at the top part of the layer and an anode at the bottom. The electrically responsive material changes form by expanding when a current passes through the material from the anode part of the layer to the diode. The expanded material stretches part the top layer to create raised portions of the display screen. The raised portions can be used in the following capacities: to assist a vision impaired viewer, enhance night viewing, allowing for reduced attention or resources to touch-screen manipulation, or change the optical properties of the display by creating a three-dimensional optical property in the surface of the flexible material covering the expanding layer.

A fusion night vision system having image intensification and thermal imaging capabilities includes an edge detection filter circuit to aid in acquiring and identifying targets. An outline of the thermal image is generated and combined with the image intensification image without obscuration of the image intensification image. The fusion night vision system may also include a parallax compensation circuit to overcome parallax problems as a result of the image intensification channel being spaced from the thermal channel. The fusion night vision system may also include a control circuit configured to maintain a perceived brightness through an eyepiece over a mix of image intensification information and thermal information. The fusion night vision system may incorporate a targeting mode that allows an operator to acquire a target without having the scene saturated by a laser pointer. The night vision system may also include a detector, an image combiner for forming a fused image from the detector and a display, and a camera aligned with image combiner for recording scene information processed by the first detector.

Light from a small laser diode is inserted in a distal end of a catheter and passed through an optical fiber that is either included in the lumen or incorporated into the wall of an invasive catheter tube during manufacture. The light is selected to be of a wavelength that is minimally absorbed by tissue, preferably in the range from about 620 nm to 1100 nm. 780 nm is preferably used as this is where the tissue absorption is near a minimum. The light passes out the end of the fiber (at the proximal end of the catheter) and through the tissue to the outside of the patient's skin where it is measured. The light pattern is observed by night vision goggles that filter out other frequencies of light. The detected light permits location of the end of the fiber, the positional accuracy depending on the thickness of tissue between the fiber tip and the exterior of the body. The method is highly accurate for small children and for catheters within a few centimeters of the skin surface of adults.

A device for gathering image information about a region of tissue that has been exposed to a contrast agent and methods of use thereof. The device preferably includes night vision goggles, and an excitation source that generates light of a wavelength to activate the contrast agent. The excitation source preferably is attached to the night vision goggles and is capable of directing light to a target. A filter preferably is attached to the night vision goggles, wherein the filter passes light sufficient to form an image of the region of tissue, and wherein the image may be assessed to determine the viability of the region of tissue.

New and unique improvements of prior known fiber optic sights for firearms with day and night time capabilities are disclosed that comprise (A) a sight base, (B) a fiber optic rod mounted in said base having an angle cut at the distal end which is positioned on the underside of the rod, and (C) an artificial light insert that is positioned in a cavity in the fiber optic rod. The cavity is sealed with a fiber optic rod plug and epoxied using an optically clear epoxy. The sight provides increased light output, co-located day and night sight views with increased illumination during the day, and uses a low power tritium insert for night time use. At night the sight achieves a transition from a bright ring during the day to a small central dot at night while maintaining the same color light for both.

A thermal control system (11) for a light source (46) of a vision system (10) includes a cooling assembly (61) that has a cooling device (62) and is thermally coupled to the light source (46). A thermal sensor (60) is thermally coupled to the light source (46) and generates a light source temperature signal. A control circuit (50) is coupled to the cooling assembly (61) and to the thermal sensor (60) and operates the cooling device (62) when the light source temperature signal is above a minimum temperature limit.

Methods for remotely measuring or monitoring one or more physiological parameters in a subject, such as blood volume pulse, heart rate, respiratory wave, or respiration rate, are provided. The methods include capturing a series of images of the subject, and processing the images to obtain physiological parameters of interest. These methods can be used to analyze single channel signals, including signals obtained from active night vision cameras. As a result, these methods can be used to measure or monitor one or more physiological parameters in both daylight and low-light conditions. Also provided are methods of removing false positives. Systems for remotely measuring or monitoring one or more physiological parameters in a subject, as well as methods of using thereof, are also provided.

A system and method of backlighting a display using LEDs is night vision viewing compatible and requires no filters. The backlight includes an array of LEDs and a controller configured to selectively illuminate the LEDs in the array. The array of LEDs includes orange LEDs that are illuminated during a night vision viewing mode and may include red LEDs that are illuminated in a non-night vision viewing mode.

A firearm improvement taking the form of a mechanical dynamo installed in an automatic firearm. Several components either replace certain parts of the firearm or are added to the firearm. In conjunction with the operation of the firearm, the components generate electric energy which is then stored in a capacitor, battery, or other element for the storage of electric energy, or supply power to a battery recharging unit attached to the firearm. The electric energy contained in the storage component, or used to recharge the batteries placed in the recharging unit, may be used at a later time as a back-up power supply for electronic components attached to or incorporated into the firearm, such as red-dot or reflex sights, laser sighting equipment, or night vision equipment.

An electrical connector for a helmet-mounted night vision system, or other electronic device, is provided. The electrical connector includes a plug assembly and a receptacle assembly each including a body having a revolved surface and an electrical contact. A protrusion extends from the revolved surface of either the plug assembly or the receptacle assembly and a cam surface is defined along the revolved surface of the other of the plug assembly and the receptacle assembly. Upon engagement between the assemblies, the revolved surfaces of the assemblies are positioned to face each other and upon rotation of the assemblies with respect to one another the protrusion is positioned to move along the cam surface causing the electrical contact of the plug assembly to bear against the electrical contact of the receptacle assembly thereby establishing a connection between the plug assembly and the receptacle assembly.

A xenon arc searchlight or illumination system incorporates a quick change release and assembly so that the lamp, reflector and battery assemblies are easily field replaceable without tools. The lamp, ballast, battery and charger are provided in a single rugged package which can be sealed for field use. The searchlight is combined by an appropriate mounting adaptable with other optical detector devices such as cameras, binoculars and night vision telescopes. The beam output is similarly usable with a combination of filters to allow the most varied intensity and wavelengths for a particular application, such as smoke filled environments, surveillance employing near-infrared or infrared illumination, ultraviolet, underwater illumination or illumination with any color in the visible range.

A method of measuring eye refraction to achieve desired quality according to a selected vision characteristics comprising the steps of selecting a characteristic of vision to correlate to the desired quality of vision from a group of vision characteristics comprising acuity, Strehl ratio, contrast sensitivity, night vision, day vision, and depth of focus, dynamic refraction over a period of time during focus accommodation, and dynamic refraction over a period of time during pupil constriction and dilation; using wavefront aberration measurements to objectively measure the state of the eye refraction that defines the desired vision characteristic; and expressing the measured state of refraction with a mathematical function to enable correction of the pre-selected vision characteristic to achieve the desired quality of vision. The mathematical function of expression may be a Zernike polynomial having both second order and higher order terms or a function determined by spline mathematical calculations. The pre-selected desired vision characteristics may be determined using ray tracing technology.

A mounting system for mounting a plurality of devices to a helmet. The mounting system comprises a mounting halo secured around the helmet, at least one rail rotatably mounted to the halo and adapted to secure a device thereto, and an adaptor bracket mounted to a rear of the helmet. The adaptor bracket is adapted to receive therein a device whose weight counterbalances the weight of night vision equipment secured to the front of the helmet.

A security system and method for mass transit and mass transportation whereby high capacity mobile vehicles such as ships, buses, planes, trains and subways transporting large numbers of passengers or cargo, are continuously monitored and secured. Sensors are utilized to detect and alert the presence of radioactive or explosive materials on board as well as within close proximity of the vehicle. Sensors are also used to identify and track cargo and people, such as drivers, operators, employees, crew, and passengers, and provide continuous location and tracking thereof from the point of initial entry to the final point of exit. Additionally, a global positioning system (GPS) provides location data, and wireless data and telecommunications link provides two-way data and voice communication with any designated remote location by using one of several modes of wireless telecommunication. Cameras provide visual observation within designated viewable areas, and may be activated by any detection of motion, and are infrared or night vision capable allowing viewing even in extremely poor light conditions. DVR recording allow a huge amount of video content from the cameras to be digitally recorded, then played back later for further analysis. Finally, the Security System may optionally have an Internet Protocol (IP) address thereby allowing authorized persons to access the system from secured Internet connection.

A firearm improvement taking the form of a mechanical dynamo installed in an automatic firearm. Several components either replace certain parts of the firearm or are added to the firearm. In conjunction with the operation of the firearm, the components generate electric energy which is then stored in a capacitor, battery, or other element for the storage of electric energy, or supply power to a battery recharging unit attached to the firearm. The electric energy contained in the storage component, or used to recharge the batteries placed in the recharging unit, may be used at a later time as a back-up power supply for electronic components attached to or incorporated into the firearm, such as red-dot or reflex sights, laser sighting equipment, or night vision equipment.

A system and method for detecting and tracking humans, such as pedestrians, in low visibility conditions or otherwise. A night vision camera periodically captures a an infrared image of a road from a single perspective. A pedestrian detection module determines a position of a pedestrian in the frame by processing the captured image. The pedestrian detection module includes a support vector machine to compare information derived from the night vision camera to a training database. A pedestrian tracking module estimates pedestrian movement of the detected pedestrian from in subsequent frames by applying filters. The tracking module uses Kalman filtering to estimate pedestrian movement at periodic times and mean-shifting to adjust the estimation. An output display module interleaves detection frames and tracking frames in generating output video for the display.