125798 results about "Electrical battery" patented technology

A spinal cord stimulation (SCS) system includes multiple electrodes, multiple, independently programmable, stimulation channels within an implantable pulse generator (IPG) which channels can provide concurrent, but unique stimulation fields, permitting virtual electrodes to be realized. The SCS system includes a replenishable power source (e.g., rechargeable battery), that may be recharged using transcutaneous power transmissions between antenna coil pairs. An external charger unit, having its own rechargeable battery can be used to charge the IPG replenishable power source. A real-time clock can provide an auto-run schedule for daily stimulation. An included bi-directional telemetry link in the system informs the patient or clinician the status of the system, including the state of charge of the IPG battery. Other processing circuitry in the IPG allows electrode impedance measurements to be made. Further circuitry in the external battery charger can provide alignment detection for the coil pairs.

An AED being powered by 120 / 240 VAC electrical power alone, being powered by external DC power alone, or any in combination with or without internal-integral battery power, and further an AED access service business method for sales of access to AEDs. The inventive AED, in addition to the defibrillator circuitry comprises a long, tangle free power access cord to be plugged into an external source of AC or DC power and optionally, additional sets of body surface and alternative electrodes positioned in the esophagus and / or heart. The AED has additional advanced capabilities including the ability to deliver rapid sequential shocks through one or more sets of patient electrodes, and the optional mode of shock delivery whereby the shock is delayed while the AED continues to analyze the patients ECG waveform and delays the defibrillation shock or sequence of shocks until the ECG analysis indicates conditions are optimum for successful defibrillation.

A method for determining the state of a battery, or battery pack, that is independent of the type of battery technology under test. The method employs one or more charging and discharging cycles, and measures one or more parameters of battery voltage, temperature, charging time, and charging cycle counts to produce a test value that is compared to empirical data. Based on the comparison, the state is determined, for example, on a pass / fail basis. The method may be embodied as instructions stored in memory and implemented by means of a microprocessor coupled to the memory. In another embodiment, the empirical data is stored within another memory located internal to the battery pack under test.

A safety charging system for a battery-operated surgical hand includes a charging base, a battery pack, and control logic. The charging base has an RFID reader antenna disposed near a top surface of the charging base and charge circuitry for charging the battery. The battery pack has the battery used with the hand piece and an RFID tag antenna disposed near a bottom surface of the battery pack. The control logic determines if the battery should be charged based on a data point read by the RFID reader antenna.

A surgical power tool system including a cordless powered surgical tool, a battery for energizing the tool and a charger for charging the battery. The battery includes a memory. When the battery is attached to the tool, a processor integral with the tool writes data to the memory regarding the operation of the tool. When the battery is attached to the charger, the data are read out the battery memory. These data are then evaluated to determine the operational state of the tool.

A dermatological treatment apparatus is disclosed that is cordless and sufficiently compact as to be hand-held. A self-contained housing is configured for gripping by a person's hand for cordless manipulation in a dermatologic treatment procedure. A light source and electrical circuit are contained within the housing. The circuit includes one or more batteries and an electronic control circuit for energizing the light source to produce output light pulses. A light path is within the housing including an aperture through which the output light pulses are propagated out of the housing having properties sufficient for providing efficacious treatment.

A vehicle lighting system for a vehicle includes an accessory module assembly that is adapted for attachment to an interior portion of a vehicle and configured to illuminate, for example, an area inside the vehicle. The module assembly includes a single high-intensity power light emitting diode that has a luminous efficiency of at least about 1 lumen per watt when the light emitting diode is operated and is preferably operated at a forward current of at least 100 milliamps. The system also includes a voltage conversion element for converting the battery / ignition voltage of the vehicle to the forward operating voltage of the light emitting diode.

One or more implantable system control units (SCU) apply one or more stimulating drugs and / or electrical pulses to one or more predetermined areas affecting circulatory perfusion. The SCU preferably includes a programmable memory for storing data and / or control parameters, and preferably uses a power source / storage device, such as a rechargeable battery. If necessary, periodic recharging of such a power source / storage device is accomplished, for example, by inductive coupling with an external appliance. The SCU provides a means of stimulating a nerve(s) or other tissue with electrical and / or infusion pulses when desired, without the need for external appliances during the stimulation session. When necessary, external appliances are used for the transmission of data to and / or from the SCU(s) and / or for the transmission of power. In a preferred embodiment, the system is capable of open- and closed-loop operation. In closed-loop operation, at least one SCU includes a sensor, and the sensed condition is used to adjust electrical and / or drug stimulation parameters.

A system for providing power to a wireless card includes power interface that provides power to a compact flash card. A boost regulator boosts the power from the power interface. A battery provides power that is summed with the power from the power interface. Moreover, a buck regulator limits the voltage of the summed power. A compact flash card can be powered by the power interface while a wireless card can be powered by the summed power.

A portable presentation unit for sterilizing, charging, and testing components of a cordless surgical instrument is disclosed including a battery charger unit configured to recharge a battery pack of the cordless surgical instrument, a testing unit configured to test at least one of the battery pack or a reusable transducer / generator unit of the cordless surgical instrument, and a sterilization unit configured to sterilize at least one of the battery pack or the transducer / generator unit.

An arrangement is provided for charging a charge storage device by placing the charge storage device in an RF or microwave radiation field. One or more antennas which receive the radiated RF electromagnetic field are placed on the charge storage device. Rectifiers connected to the antennas rectify the received RF electromagnetic field an produce a DC output current which is used to charge the charge storage device. The charge storage device may be a battery or a capacitor and may form an integral part of an electronic device. The same RF field that charges the charge storage device can also be employed to communicate data to transponders which may be associated with computing devices.

A portable data terminal including an elongated housing and a vertical grip. The housing has a battery well that extends traverse to a longitudinal axis of the housing. A battery pack has a longitudinal axis that, when seated in the battery well, extends traverse to a longitudinal axis of the housing, the battery pack having an integrated latch that engages a recess in the battery well.

Systems and methods are provided that use a mobile robotic device to transport rechargeable batteries between a base station, which charges the batteries, and a battery operated device, such as battery powered kiosk or signage system, which uses a charged battery as a power source. After traveling to a battery operated device, the mobile robotic device removes any discharged batteries from the battery operated device and installs a charged battery. The mobile robotic device then travels to the base station and attaches the discharged battery to the base station for recharging. The mobile robotic device may be configured to perform other transfers, such as data transfers and paper transfers. In addition, the mobile robotic device may be configured to perform a photographic and spatial survey of the isles, retail shelves, and surrounding environment for various purposes, such as generating three-dimensional store models and remote viewing.

To provide a power storage device, an operation condition of which is easily analyzed. A secondary battery includes a sensor that is a measurement unit, a microcontroller unit that is a determination unit, and a memory that is a memory unit. With the sensor, conditions of the secondary battery such as the remaining battery power, the voltage, the current, and the temperature are measured. The microcontroller unit performs arithmetic processing of the measurement results and determines the operation condition of the secondary battery. Further, the microcontroller unit stores the measurement result in the memory in accordance with the operation condition of the secondary battery.

A battery pack for a use with a powered surgical tool. The battery pack may include a housing with an outer wall and opposing first and second ends. The housing may include an elongated shape that extends between the first and second ends. A first member may extend across the first end of the housing and include a first aperture, and a second end member may extend across the second end of the housing and may include a second aperture. A passage may extend through the housing with a first end that aligns with the first aperture and a second end that aligns with the second aperture. The housing may be sized for a plurality of storage locations positioned between the first and second members and around the passage, and each of the storage locations may be configured to store a power cell.

A portable power supply device comprises a stackable battery housing locating a plurality of batteries therein and an inverter housing locating an inverter therein which is arranged to convert the direct current from the batteries to an alternating current. The inverter housing is readily separable from the battery housing such that one or more battery housings can be readily interchangeable to provide a constant supply of power and to allow a variety of charging configurations of the batteries. First electrical connectors on the battery housing and second electrical connectors on the inverter housing automatically connect the inverter to the batteries upon stacking of the inverter housing on the battery housing. Furthermore charging terminals are mounted externally on the inverter housing for ready access to connect to a charging device in a convenient manner without requiring the housings to be opened or separated form one another.

An expert system manages a power grid wherein charging stations are connected to the power grid, with electric vehicles connected to the charging stations, whereby the expert system selectively backfills power from connected electric vehicles to the power grid through a grid tie inverter (if present) within the charging stations. In more traditional usage, the expert system allows for electric vehicle charging, coupled with user preferences as to charge time, charge cost, and charging station capabilities, without exceeding the power grid capacity at any point. A robust yet accurate state of charge (SOC) calculation method is also presented, whereby initially an open circuit voltage (OCV) based on sampled battery voltages and currents is calculated, and then the SOC is obtained based on a mapping between a previously measured reference OCV (ROCV) and SOC. The OCV-SOC calculation method accommodates likely any battery type with any current profile.

Disclosed is a water-discharging device of a high voltage battery pack that can automatically adjust the level of water collecting in an under cover such that high voltage parts, such as an expensive battery module and a BMS, equipped in the under cover are not damaged by the water, by making the BMS operate a water pump to forcibly discharge the water out of the under cover, when the water collects and increases in level in the under cover having a sealed structure.

A method for determining the concentration of a reduced (or oxidised) form of a redox species in an electrochemical cell of the kind comprising a working electrode and a counter electrode spaced from the working electrode by a predetermined distance, said method comprising the steps of: (1) applying an electric potential difference between the electrodes; (2) selecting the potential of the working electrode such that the rate of electro-oxidation of the reduced form (or electro-reduction of the oxidised form) of the species is diffusion controlled, (3) selecting the spacing between the working electrode and the counter electrode so that reaction products from the counter electrode arrive at the working electrode; (4) determining current as a function of time after application of the potential and prior to achievement of a steady state; (5) estimating the magnitude of the steady state current, and (6) obtaining from the change in current with time and the magnitude of the steady state current, a value indicative of the diffusion coefficient and / or of the concentration of the reduced form (or the oxidised form) of the species. Also disclosed is an apparatus for determining the concentration of a redox species in an electrochemical cell comprising: an electrochemical cell having a working electrode and a counter (or counter / reference) electrode, means for applying and electric potential difference between said electrodes, means for measuring the change in current with time, and characterised in that the working electrode is spaced from the counter electrode by less than 500 mum.

A terminal and electrical water-resistance method, the terminal includes: a circuit board, a battery providing a power source for the circuit board, a housing provided with a transparent medium used for reflecting light; the circuit board includes: a detection module, configured to: emit light towards the transparent medium, receive the light reflected by the transparent medium to convert into electric signal data to send to a control module; the control module, configured to: receive the electric signal data to compare with preset data, trigger the power-off switch when a difference value between the electric signal data and the preset data reaches a preset threshold which is preset according to the light and the transparent medium, wherein, the preset data are electric signal data when the light is totally reflected by the transparent medium; a power-off switch configured to: disconnect a connection between the circuit board and the battery after triggering.

A method and system of managing power usage of devices including selectively executing a program application on a plurality of battery powered devices. Battery usage data is generated for a battery in one or more of the devices during execution of the work application. The battery usage data includes the run-time of the battery for the work application being executed. The data is aggregated and stored for the plurality of devices in memory. An application specific battery profile is generated using the stored battery usage data. The application specific battery profile is associated with the work application being run by the client devices.

This disclosure describes techniques for operating a corded electronic device in which a battery and a power control unit manage power draw from an external power source electrically coupled to the corded electronic device using a physical cord, such as a universal serial bus (USB) cable. The power control unit automatically supplements an electrical current continuously drawn by the corded electronic device from the external power source with an electrical current from the battery, when needed. Moreover, the power control unit operates to limit the current drawn from the external power source and the physical cord so as to ensure the current does not exceed any limitations or requirements associated with the external power source or the physical cord.