Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
Hiro

78651 results about "Base station" patented technology

Base station (or base radio station) is – according to the International Telecommunication Union's (ITU) Radio Regulations (RR) – a "land station in the land mobile service." The term is used in the context of mobile telephony, wireless computer networking and other wireless communications and in land surveying. In surveying, it is a GPS receiver at a known position, while in wireless communications it is a transceiver connecting a number of other devices to one another and/or to a wider area. In mobile telephony, it provides the connection between mobile phones and the wider telephone network. In a computer network, it is a transceiver acting as a switch for computers in the network, possibly connecting them to a/another local area network and/or the Internet. In traditional wireless communications, it can refer to the hub of a dispatch fleet such as a taxi or delivery fleet, the base of a TETRA network as used by government and emergency services or a CB shack.

Portable remote patient telemonitoring system

A system and method for monitoring vital signs and capturing data from a patient remotely using radiotelemetry techniques. The system is characterized by a cordless, disposable sensor band with sensors form measuring full waveform ECG, full waveform respiration, skin temperature, and motion, and transmission circuitry for the detection and transmission of vital signs data of the patient. A small signal transfer unit that can either be worn by the patient, e.g., on his or her belt, or positioned nearby receives data from the sensor band, which it then forwards by e.g., radio transmission to a base station that can be located up to 60 meters away. The base station receives data transmissions from the signal transfer unit and is designed to connect to conventional phone lines for transferring the collected data to a remote monitoring station. The base station may also capture additional clinical data, such as blood pressure data, and to perform data checks. Patient safety is enhanced by the ability of the base station to compare clinical data, e.g., ECG, against given profiles and to mark events when appropriate or when the base station is programmed to do so. Such events are indicated to the physician and could be indicated to the patient by reverse transmission to the signal transfer unit. A remote monitoring station allows the presentation and review of data (including events) forwarded by the sensor band. ECG analysis software and a user-friendly graphical user interface are provided to remotely analyze the transmitted data and to permit system maintenance and upkeep. The system of the invention has useful application to the collection of patient clinical data during drug trials and medical testing for regulatory approvals as well as management of patients with chronic diseases.
Owner:CLEARPATH PARTNERS

Audio visual player apparatus and system and method of content distribution using the same

A portable wireless communications subscriber audio and / or video player apparatus and system and method for selecting, requesting, downloading, and playing audio and / or video data content files from an Internet-based database server. The wireless link is preferably implemented in accordance with the WiFi protocol, which allows connectivity to the Internet by being in proximity with a local base station or WiFi hotspot (i.e., publicly available local wireless access hub connected to the Internet). The portable wireless communications subscriber audio and / or video player apparatus and system preferably include a security means for monitoring and blocking unauthorized use of the player apparatus and system. The player apparatus further preferably has the capability to communicate with other neighboring player apparatus for the purpose of exchanging content data files, playlists and personal messages.
Owner:SANDISK TECH LLC

System, Method, and Apparatus for Electronic Patient Care

A method implemented by an operative set of processor executable instructions configured for execution by a processor includes: determining if a monitoring client is connected to a base through a physical connection; establishing a first communications link between the monitoring client and the base through the physical connection; updating, if necessary, the interface program on the monitoring client and the base through the first communications link; establishing a second communications link between the monitoring client and the base using the first communications link; and communicating data from the base to the monitoring client using the second communications link.
Owner:DEKA PROD LLP

System and method for promoting commerce, including sales agent assisted commerce, in a networked economy

A personal communication and electronic commerce system for use by participating users and participating merchants in connection with incentive programs in the Network Economy. The system includes a cellular communication network that includes geographically spaced base stations that are linked to a fixed communication network. Users may have personal communication devices that can be used to allow a digital message generated on the personal communication devices by placing a call through one of the base stations and memory for storing a digital value corresponding to a monetary value. The personal communication device may also be used as a cellular position locator to determine one's geographic location and, if desired, to access information from a merchant information database containing information pertaining to a plurality of participating merchants located within the geographic territory covered by the cellular communication network. The merchant information may be stored on a database that is accessible by merchants so those merchants can add, delete or alter information contained in their respective listings. An incentive system is also provided for creating incentives for participating users to encourage. This computer implemented incentive program for encouraging certain participant actions includes a first reward program under which participants may earn points for certain actions and a second reward program through which the redemption rate associated with a particular participant is adjusted in response to certain participant action. The incentive program has a wide range of applications, including transportation, financial services and computer gaming.
Owner:BEDNAREK MICHAEL DAVID

Cellular systems with distributed antennas

A communication system providing wireless communication among wireless users through a number of cellular base stations, each including at least transport management equipment and broadband equipment, at least one of which supports at least remote cellular station including RF equipment for communication with users of cellular devices. The system includes at lease one wireless narrow beam communication link operating at millimeter wave frequencies in excess of 60 GHz connecting a remote cellular station with a cellular base station equipped with broad band conversion electronic equipment and transport management equipment. In preferred embodiment the communication system includes a large number of remote cellular stations with each remote cellular station serving a separate communication cell. Each remote cellular station is equipped with a low frequency wireless transceiver for communicating with the wireless users within the cell at a radio frequency lower than 6 GHz and a narrow beam millimeter wave wireless transceiver operating at a millimeter wave frequency higher than 60 GHz for communicating with another millimeter wave transceiver at another remote cellular station or a millimeter wave transceiver at a base station.
Owner:TREX ENTERPRISES CORP

Wireless communications apparatus and method

A wireless communication method and apparatus are described for increasing security for communication devices utilizing identification chips for accessing wireless networks and the associated billing for services. One aspect of the invention is an enhanced phone chip and a communications device adapted to engage the enhanced phone chip, which then cannot be installed or removed from the wireless communications device by unauthorized users. In one embodiment a security key mates to the identification chip and is utilized for installing and removing the enhanced phone chip. The security key preferably has a display upon which information about the communication device is displayed prior to removing the security key after installing the enhanced phone chip. Other aspects of the invention include wireless base station communication devices which support wired (dedicated and non-dedicated), and more preferably wireless extensions, while providing sharing of wireless network resources and interconnectivity between base station and extensions.
Owner:US THERMOELECTRIC CONSORTIUM

Physical presence digital authentication system

The interactive authentication system allows a consumer to interact with a base station, such as broadcast media (e.g., television and radio) or PC, to receive coupons, special sales offers, and other information with an electronic card. The electronic card can also be used to transmit a signal that can be received by the base station to perform a wide variety of tasks. These tasks can include launching an application, authenticating a user at a website, and completing a sales transaction at a website (e.g., by filling out a form automatically). The interaction between the base station and the electronic card is accomplished by using the conventional sound system in the base station so that a special reader hardware need not be installed to interact with the electronic card. The user is equipped with an electronic card that can receive and transmit data via sound waves. In the various embodiments, the sound waves can be audible or ultrasonic (which can be slightly audible to some groups of people).
Owner:SONIXIO INC

Portable remote patient telemonitoring system using a memory card or smart card

A system and method for monitoring health parameters and capturing data from a subject. The system is characterized by a cordless, disposable sensor band with sensors for measuring full waveform ECG, full waveform respiration, skin temperature, and motion, and a connector which accepts a memory card or a smart card for storage of the measured data. After a predetermined period of time, such as when the sensor band is removed, the memory card or smart card is removed and inserted into a monitoring device which reads the stored health parameter data of the subject. The monitoring device includes a base station that includes a memory / smart card reader and is connected to conventional phone lines for transferring the collected data to a remote monitoring station. The base station may also capture additional clinical data, such as blood pressure data, and to perform data checks. Subject safety is enhanced by the ability of the base station to compare clinical data, e.g. ECG, against given profiles and to mark events when appropriate or when the base station is programmed to do so. The remote monitoring station allows the presentation and review of data (including events) forwarded by the sensor band. ECG analysis software and a user-friendly graphical user interface are provided to remotely analyze the transmitted data and to permit system maintenance and upkeep. In alternative embodiments, a smart card includes the sensor band's electronics and / or signal transmission circuitry in conjunction with a portable data logger so that the electronics may be reused from one disposable sensor band to the next without limiting the patient's range of movement. The system of the invention has useful application to the collection of subject clinical data during drug trials and medical testing for regulatory approvals as well as management of subjects with chronic diseases.
Owner:CLEARPATH PARTNERS

Apparatus for energizing a remote station and related method

Apparatus for remote interaction with an object of interest includes a remote station for obtaining information from the object of interest, a base station for transmitting energy in space to and communicating with the remote station and the remote station having conversion means for energizing the remote station responsive to receipt of the transmitted energy. The energy may be of any suitable type including RF power, light, acoustic, magnetic energy or other form of space transmitted or "radiant" energy. The remote station does not have to contain a source of stored energy or a wired connection to a source of energy. The remote station receives the energy transmission and data transmission from the base station and transmits data to the base station. Microprocessor controllers may be provided for the base station and the remote station. The remote station may receive information from sensors and through one or more transponders sequentially communicate information to the base station. An associated method is provided. In other embodiments which are suited for use in miniaturized electronic chip systems, power enhancement and increased effective antenna size are provided. An electronic article containing a microchip having at least one antenna structured to communicate with an antenna remotely disposed with respect to the microchip formed therein and an associated method are provided.
Owner:PITTSBURGH UNIV OF

Surface wave communications between a remote antenna and a base station that is co-located with another base station

At a first site, a first antenna exchanges first communications with wireless devices, and exchanges the first communications with a first base station. The first base station exchanges the first communications with a service node. At a second site, a second antenna exchanges second communications with other wireless devices, and exchanges the second communications with a first surface wave interface. The first surface wave interface exchanges the second communications with a second surface wave interface at the first site. The second surface wave interface exchanges the second communications with a second base station at the first site. The second base station exchanges the second communications with the service node. The service node processes the first and second communications to provide a communication service to the wireless devices.
Owner:T MOBILE INNOVATIONS LLC

Radio communication system

There is disclosed a radio communication system in which a constitution of a base station and further a control station can be simplified. A radio communication system according to the present invention converts a received signal received by a plurality of antenna elements in a base station to a signal of different frequency band, and then conflates the converted signal in order to generate sub-carrier wave multiplex signal. The signal is converted to an optical signal, and then the optical signal is transmitted to a control station via an optical fiber. Or the control station performs weighting to phase of the transmitted signal transmitted from a plurality of antennas of a base station, and then performs frequency conversion to different frequency band, and then conflates the converted signal in order to generate the sub-carrier wave multiplex signal. The signal is converted to an optical signal, and then an optical signal is transmitted to the base station side via the optical fiber. The control station and the base station divides the received sub-carrier wave multiplex signal by each frequency band, and then the frequency of the divided signals are converted to the same frequency band in order to generate the transmitted / received signal of each antenna element. By such a constitution, it is possible to reduce constituent of the optical transmission components to the minimum and to simplify the constitution of the base station. Furthermore, it is possible to maintain the relative phase difference and the relative intensity of the transmitted / received signal of each antenna element. Because of this, it is possible to estimate an arrival direction of the received signal and to control radiation beam pattern of the transmitted signal.
Owner:KK TOSHIBA

Interworking gateway for mobile nodes

Systems and methods are provided that allow inter-working between communication networks for the delivery of service to mobile nodes. A gateway is provided that communicates with a femto cell to extend service to an area that otherwise does not receive coverage from a service provider. The femto cell is a small scale base station used to provide coverage over a small area (such as a home or business), and connect to a home or enterprise network. The femto cell provides service for a mobile node and a gateway permits communication over a broadband network. The gateway integrates the mobile nodes connecting via a femto cell into the service provider's network. The gateway also allows provisioning of services and applications, control of service levels, and provides seamless handoffs to macro base stations and other types of access technologies such as Wi-Fi.
Owner:CISCO TECH INC

Communication method and apparatus using analog and digital hybrid beamforming

A communication method and apparatus using analog and digital hybrid beamforming are provided. The method includes receiving a first message including a measurement and selection condition for hybrid beamforming from a Base Station (BS), measuring channels of a plurality of BS transmission beams, selecting at least one BS transmission beam based on channel measurements, transmitting report information about the selected at least one BS transmission beam to the BS, receiving from the BS a second message, estimating an effective channel matrix for the selected final BS transmission beam according to the measurement and report condition, determining feedback information for digital beamforming of the BS based on the effective channel matrix, transmitting the determined feedback information to the BS, and receiving a data burst from the BS according to a Multiple Input Multiple Output (MIMO) mode and / or a configuration scheduled based on the feedback information.
Owner:SAMSUNG ELECTRONICS CO LTD

Unmanned aerial vehicle base station

A method and apparatus comprising a platform, a battery system, a power generation system, a number of charging stations, and a controller. The platform is configured to house a number of unmanned aerial vehicles. The power generation system is connected to the battery system. The power generation system is configured to generate electrical energy from an environment in which the platform is located, and store the electrical energy in the battery system. The number of charging stations is connected to the battery system. The controller is connected to the battery system and is configured to receive sensor data from the number of unmanned aerial vehicles, generate information from the sensor data, and send the information to a remote location.
Owner:THE BOEING CO

Modular energy control system

ActiveUS20070271006A1Minimal configurationReadily scalable costMechanical power/torque controlEnergy efficient ICTElectricityEnergy control
A wireless base unit communicates with one or more wireless load manager units to receive power measurements for one or more loads connected to the wireless load manager. In response to dynamic variables, such as the changing price of electricity, the wireless base unit transmits commands to the wireless load manager to shut off or reduce power consumed by the one or more loads. In one variation, a wireless adapter also receives commands from the wireless base unit and converts the commands into a vendor-specific format used to control other devices such as a photovoltaic (PV) inverter.
Owner:GRIDPOINT

Harvesting ambient radio frequency electromagnetic energy for powering wireless electronic devices, sensors and sensor networks and applications thereof

ActiveUS20070109121A1Facilitates transmission of wireless signalFacilitates local and remote distributionBatteries circuit arrangementsFrequency-division multiplex detailsElectrical batteryThe Internet
A system and device for harvesting various frequencies and polarizations of ambient radio frequency (RF) electromagnetic (EM) energy for making a passive sensor (tag) into an autonomous passive sensor (tag) adapted to collect and store data with time-stamping and some primitive computation when necessary even when an interrogating radio frequency identification (RFID) reader is not present (not transmitting). A specific source of ambient RF EM energy may include wireless fidelity (WiFi) and / or cellular telephone base stations. The system and device may also allow for the recharging of energy storage units in active and battery assisted passive (BAP) devices. The system could be a “smart building” that uses passive sensors with RF EM energy harvesting capability to sense environmental variables, security breaches, as well as information from “smart appliances” that can be used for a variety of controls and can be accessed locally or remotely over the Internet or cellular networks.
Owner:COHEN MARC HARRY

System for long-term remote medical monitoring

A system for long-term remote medical monitoring is especially suitable for the medical supervision of astronauts onboard a space station. The system includes at least one autonomous sensor unit (SU) with a sensor (1) and transmit / receive electrodes (2) connected to a microchip (3) and mounted on a carrier (4) in the form of an adhesive bandage that can easily be applied to the skin of the subject astronaut (11). The system further includes a body transceiver (10) that is worn on the body of the subject and acts as a centralized transmitting and receiving unit, and a portable data logger (12). Medical data such as the pulse rate and the like, as well as environmental data such as the ambient surrounding air temperature, are sensed by respective allocated sensor units (SU) and transmitted from the sensor units as electrical signals via the skin and other body tissues of the subject (11) to the body transceiver (10). From the body transceiver (10), the data signals are further transmitted, for example by a radio or infrared transmission, to the data logger (12), where the data can be recorded, displayed, processed, or further transmitted via a satellite (14) to a base station (13) or a ground-based facility such as a hospital (15). Polling signals are also transmitted from the body transceiver (10) to the sensor units (SU) in a wireless manner through the skin and other body tissues of the subject.
Owner:ZUERICH MEDTECH

Navigational control system for a robotic device

A navigational control system for altering movement activity of a robotic device operating in a defined working area, comprising a transmitting subsystem integrated in combination with the robotic device, for emitting a number of directed beams, each directed beam having a predetermined emission pattern, and a receiving subsystem functioning as a base station that includes a navigation control algorithm that defines a predetermined triggering event for the navigational control system and a set of detection units positioned within the defined working area in a known spaced-apart relationship, the set of detection units being configured and operative to detect one or more of the directed beams emitted by the transmitting system; and wherein the receiving subsystem is configured and operative to process the one or more detected directed beams under the control of the navigational control algorithm to determine whether the predetermined triggering event has occurred, and, if the predetermined triggering event has occurred transmit a control signal to the robotic device, wherein reception of the control signal by the robotic device causes the robotic device to implement a prescribed conduct that alters the movement activity of the robotic device.
Owner:IROBOT CORP

Method and system for wireless networking using coordinated dynamic spectrum access

A method and system for coordinated dynamic access to radio spectrum for wireless networking includes defining a coordinated access band (CAB) from which radio access network (RAN) managers may request spectrum allocations in the form of time bound spectrum leases for their respective requesting base stations. In one embodiment of the present invention, a DIMSUMnet architecture is implemented to make some fundamental choices and to centralize the collection of information, such as spectral occupancy, thermal and adjacent frequency interference. Such collected information is subsequently used by a spectrum broker in making spectrum allocation decisions. The DIMSUMnet architecture of the present invention also introduces a RAN manager element to centralize the task of acquiring time bound spectrum leases and for configuring the base stations.
Owner:ALCATEL LUCENT SAS

Multi-purpose robotic operating system and method

A dynamically configurable robotic system and method for performing surgical operations using a plurality of robotic arms remotely controlled by at least one operator console. The system comprises a track system configured for mounting to a patient support table, such that the track system provides a stable operating platform for the robotic arms and for facilitating placement of a proximal end of each of the arms at a selected position about a periphery of the patient support table. the system and method also have a plurality of base stations for operatively coupling each of the robotic arms to the track system, such that each of the base stations include a housing, a first connector for coupling the housing to the track system, the first connector configured for facilitating movement of the housing along the track system while coupled thereto, and a second connector for coupling the housing to the proximal end of at least one of the robotic arms, the second connector configured for providing at least one of power supply, control signalling, and data communication with respect to the coupled robotic arm. The system and method also have a control unit for coupling to at least two of the base stations and configured for dynamically connecting operative remote control between the coupled base stations and a first operator console of the at least one operator console.
Owner:CENT FOR SURGICAL INVENTION & INNOVATION

Method and computer program product for internet protocol (IP)-flow classification in a wireless point to multi-point (PtMP) transmission system

A system and method for Internet Protocol (IP) flow classification group IP flows in a packet-centric wireless point to multi-point telecommunications system is disclosed. The method comprises analyzing an IP flow in a packet-centric manner, classifying the IP flow, scheduling the IP flow for transmission over a shared wireless bandwidth between a wireless base station and at least one subscriber customer premises equipment (CPE) station, allocating the shared wireless bandwidth to a communication of the IP flow between the wireless base station and a subscriber CPE station so as to optimize end-user quality of service (QoS) associated with the IP flow.
Owner:INTELLECTUAL VENTURES I LLC

Apparatus for energizing a remote station and related method

Apparatus for remote interaction with an object of interest includes a remote station for obtaining information from the object of interest, a base station for transmitting energy in space to and communicating with the remote station and the remote station having a conversion device for energizing the remote station responsive to receipt of the transmitted energy. The energy may be of any suitable type including RF power, light, acoustic, magnetic energy or other form of space transmitted or "radiant" energy. The remote station does not have to contain a source of stored energy or a wired connection to a source of energy. The remote station receives the energy transmission and data transmission from the base station and transmits data to the base station. Microprocessor controllers may be provided for the base station and the remote station. The remote station may receive information from sensors and through one or more transponders sequentially communicate information to the base station. An associated method is provided.
Owner:UNIVERSITY OF PITTSBURGH +1

System and method for promoting commerce, including sales agent assisted commerce, in a networked economy

A personal communication and electronic commerce system for use by participating users and participating merchants in connection with incentive programs in the Network Economy. The system includes a cellular communication network that includes geographically spaced base stations that are linked to a fixed communication network. Users may have personal communication devices that can be used to allow a digital message generated on the personal communication devices by placing a call through one of the base stations and memory for storing a digital value corresponding to a monetary value. The personal communication device may also be used as a cellular position locator to determine one's geographic location and, if desired, to access information from a merchant information database containing information pertaining to a plurality of participating merchants located within the geographic territory covered by the cellular communication network. The merchant information may be stored on a database that is accessible by merchants so those merchants can add, delete or alter information contained in their respective listings. An incentive system is also provided for creating incentives for participating users to encourage. This computer implemented incentive program for encouraging certain participant actions includes a first reward program under which participants may earn points for certain actions and a second reward program through which the redemption rate associated with a particular participant is adjusted in response to certain participant action. The incentive program has a wide range of applications, including transportation, financial services and computer gaming.
Owner:BEDNAREK MICHAEL D

System and method for optimizing network capacity in a cellular wireless network

A system and method is disclosed for increasing the efficiency of a cellular communication network, reduce ongoing operating costs and increase revenue. According to one aspect, a method is disclosed for increasing the efficiency of a cellular communication network whereby network capacity in the radio access network (RAN) and baseband processing for wireless connections are dynamically adjusted to automatically provision sufficient bandwidth and baseband processing capacity in response to changes in the network. The method is further extended by implementing policy management which allows wireless carriers to develop and implement network based policies to automatically increase or decrease the amount of processing resources and network bandwidth required from any cell site, hub or mobile switching office. According to another aspect, network efficiency is enhanced by utilizing a novel cellular network infrastructure. RF signals from cell site antennas of various technology types are demodulated, digital bit information is extracted from the RF signals, processed, and groomed into Gigabit Ethernet/Resilient Packet Ring (GigE/RPR) or Ethernet over copper traffic flows using specific Quality of Service (QoS) priorities. The GigE/RPR traffic flows are routed to hub sites or mobile switching offices, at which point the packetized information is extracted and converted to RF signals that are equivalent to the signals that were received at the antenna. The RF signals are sent over coaxial cable to a network hub including a pool of Base Transceiver Stations (BTSs) (or Node Bs). The hub is coupled to one or more mobile switching offices via a second fiber optic ring.
Owner:CHAMBERS MAHDI +1

System, Method, and Apparatus for Electronic Patient Care

A method, related system and apparatus are disclosed. The method is implemented by an operative set of processor executable instructions configured for execution by a processor. The method includes the acts of: determining if a monitoring client is connected to a base through a physical connection; establishing a first communications link between the monitoring client and the base through the physical connection; updating, if necessary, the interface program on the monitoring client and the base through the first communications link; establishing a second communications link between the monitoring client and the base using the first communications link; and communicating data from the base to the monitoring client using the second communications link.
Owner:DEKA PROD LLP

Method for effectively implementing a multi-room television system

A method for effectively implementing a multi-room television system includes a digital base station that processes and combines various program sources to produce a processed stream. A communications processor then responsively transmits the processed stream as a local composite output stream to various wired and wireless display devices for flexible viewing at variable remote locations. The transmission path performance is used to determine the video encoding process, and special attention is taken to assure that all users have low-latency interactive capabilities.
Owner:SLING MEDIA LLC

Transmission control protocol/internet protocol (TCP/IP) packet-centric wireless point to multi-point (PTMP) transmission system architecture

A packet-centric wireless point to multi-point telecommunications system includes: a wireless base station communicating via a packet-centric protocol to a first data network; one or more host workstations communicating via the packet-centric protocol to the first data network; one or more subscriber customer premise equipment (CPE) stations coupled with the wireless base station over a shared bandwidth via the packet-centric protocol over a wireless medium; and one or more subscriber workstations coupled via the packet-centric protocol to each of the subscriber CPE stations over a second network. The packet-centric protocol can be transmission control protocol / internet protocol (TCP / IP). The packet-centric protocol can be a user datagram protocol / internet protocol (UDP / IP). The system can include a resource allocation means for allocating shared bandwidth among the subscriber CPE stations. The resource allocation is performed to optimize end-user quality of service (QoS). The wireless communication medium can include at least one of: a radio frequency (RF) communications medium; a cable communications medium; and a satellite communications medium. The wireless communication medium can further include a telecommunications access method including at least one of: a time division multiple access (TDMA) access method; a time division multiple access / time division duplex (TDMA / TDD) access method; a code division multiple access (CDMA) access method; and a frequency division multiple access (FDMA) access method.The first data network includes at least one of: a wireline network; a wireless network; a local area network (LAN); and a wide area network (WAN). The second network includes at least one of: a wireline network; a wireless network; a local area network (LAN); and a wide area network (WAN).
Owner:INTELLECTUAL VENTURES I LLC

Method and apparatus for playing games between the clients of entities at different locations

A method and apparatus for playing games between the clients of entities at different locations by linking multiple players together through a network using the users' mobile phones. The method includes connecting a plurality of mobile phones together through a network for playing a game, setting up a game scenario for each of the plurality of mobile phones and transmitting game signals between the plurality mobile phones across the network. At least two of the plurality of mobile phones are remotely located. The mobile phones connect to the network through a base station. A connection from a mobile phone to the network through a base station is a low power radio frequency connection. The interactive game may be interrupted when a mobile phone receives a call. The interactive game is interrupted only for the mobile phone receiving the call.
Owner:NOKIA TECHNOLOGLES OY
Who we serve
  • R&D Engineer
  • R&D Manager
  • IP Professional
Why Patsnap Eureka
  • Industry Leading Data Capabilities
  • Powerful AI technology
  • Patent DNA Extraction
Social media
Patsnap Eureka Blog
Learn More
PatSnap group products