2048 results about "Radio access" patented technology

An ad-hoc, peer-to-peer radio access system having a series of remote terminals, where each remote terminal is capable of forming a link, or hop, of the routing of a call made by one of the series of terminals. The status of the battery of each terminal which may potentially form part of the routing path of a call is reported to other terminals, whereby the routing path for a call will be decided also based on the status of the battery-charge of each terminal along the routing path.

A method and system for wireless data communication using a first wireless communication technology and a second wireless communication technology. The second wireless communication technology being different from the first wireless communication technology. A transmitter is arranged to transmit data using frame structures based on the first wireless communication technology and the second wireless communication technology in which the frame structure based on the second wireless communication technology has a timing structure, MAC and pilot that are also used with the frame structure of the first wireless communication technology. The transmitter is arranged to selectively change transmission on a frame by frame basis between the first wireless communication technology and the second wireless communication technology.

According to embodiments of the invention, user equipment (UE) performs inter-radio access technology (RAT) neighbour cell measurements during an idle mode of the UE. The inter-RAT measurement results may be stored in an internal memory of the UE during the Idle mode. When the UE initiates a connection setup, an inter-RAT measurement report containing inter-RAT measurement results obtained during the idle mode is sent to the network at the connection setup. Consequently, the inter-RAT measurement information is immediately available for a network decision at the beginning of the connected mode. For example, an inter-RAT handover can be decided and performed without a delay, based on the inter-RAT measurements made in advance during the idle mode and reported at the connection setup.

Currently, network utilization and performance are diminished due to capacity issues, which may be resolved by adding hardware / software to spread traffic uniformly according to network element usage information. Disclosed is a method of and corresponding apparatus for resolving network element capacity issues in a wireless network by inspecting data traffic content for information about wireless network elements and data traffic content, collecting said information, and managing (e.g., shaping and steering) the incoming traffic based on the information. Examples of said information include radio bearer resource information for network elements and traffic associated with a wireless access portion of the wireless network and radio access bearer information for network elements and traffic associated with a backhaul portion of the wireless network. By employing embodiments of the invention, network utilization and performance may be increased using existing wireless network elements in a manner overlaid on existing network optimization techniques (e.g., load balancing).

An improved connectivity to radio access point is enabled by a server that includes a database storing data about various radio access points, and an evaluation module evaluating the quality of connection to each of the access points. Clients receive updates about relevant access points from the server and use the information to connect to the preferred access point. The clients also check connectivity to other access points in the vicinity, and report the findings to the server. The server uses the reports to update its database, and send corresponding updates to the clients. The database can include information about the location of the access points. The information about the location of the access points can be manually input or determined using GPS information. The location of an access points can be determined as a function of available information about other access points detected at the same location. An access point can be presumed to be located in approximately the same location as another access point detected in the same location by the same user terminal. Where more than one access point having a known location is detected in the same location as an unmapped access point (having an unknown location), the location of the unmapped access point can be determined as function of a weighted average of the known locations of the other access points and signal strength of the signal received from each access point.

An ad-hoc, peer-to-peer radio access system for cellular communications systems using time division duplex as a way of maximizing the bits / hz / km2 for cellular systems. The network architecture of the ad-hoc system allows the radio access to be integrated with the fixed components of a conventional cellular system, PSTN or ISP. The objective is to make the system of the invention transparent to the features and services provided by the external network. The advantages of such a system to a cellular operator are that significantly less infrastructure is required, and that the RF spectrum is more efficiently utilized resulting in much lower building and operating costs. The system architecture is comprised of remote terminals, routers, gateways, and at least one gateway controller that interfaces the ad-hoc system to a cellular network system. The ad-hoc system of the invention allows for both voice and data transmissions and receptions.

A technique is provided for use by a Multi-Radio Management Resource (MRRM) component of a multi-radio wireless communication system for controlling the handover of a mobile terminal between different radio access technologies (RAT). In one example, all suitable RATs having coverage areas currently covering the location of a mobile terminal are identified. The performance gain that might be achieved via a handover to one of the other RATs is then determined by the MRRM based on various performance gain factors. Handover costs that will be incurred as a result of the handover are also explicitly calculated. Then, a cost-adjusted gain is determined by the MRRM based on the performance gain and the handover costs. A handover is only triggered by the MRRM if the cost-adjusted gain exceeds a minimum threshold. The speed and trajectory of the mobile terminal may also be considered.

The present invention provides a method for implementation in mobile unit that is configured to communicate with a wireless communication system that includes macrocells and femtocells. The macrocells and the femtocells use different generation radio access technologies. The method includes determining a distance between the mobile unit and the femtocell(s) and transmitting a first measurement report when the distance between the mobile unit and the femtocell(s) is less than a threshold distance. The method also includes performing an inter-radio access technology handoff from the base transceiver station to the femtocell when the distance is less than a threshold distance.

Communication systems and methods are provided allowing a single mode mobile terminal to support mobile assisted signal strength measurement operations in both a fixed frequency reuse based communication network and an adaptive channel allocation based communication network. Candidate base station signal strength measurements are requested by a fixed frequency reuse type network, measured by the mobile terminal and provided to the fixed frequency reuse type network which is seeking to identify a strongest signal for mobile assisted handover operations. In addition, interference signal strength measurements are requested by an adaptive channel allocation type network, measured by the mobile terminal and provided to the adaptive channel allocation type network by the mobile terminal. No redundant circuitry is required in the mobile terminal. Instead, the mobile terminal executes the same operations using the same hardware regardless of whether the requested measurement is of a candidate signal strength or an interference signal.

A method and system that mitigates data session degradation over a radio link connection with an end server by allocating resources at a wireless communication device based on real-time radio frequency (RF) channel conditions. A performance tracking and resource allocation (PTRA) logic monitors radio access bearer (RAB) configuration and radio link quality for communication links between the WCD and the end server. The PTRA logic sets a maximum transmission unit (MTU) size parameter to a pre-established size associated with the measured radio link quality. In response to detecting a change in the RAB configuration, the PTRA logic performs a real-time round trip time (RTT) measurement utilizing individual RTTs associated with packet segments transmitted at a lower protocol layer. In addition, the PTRA logic modifies at least one of a transmission control protocol (TCP) receive window (RWIN) and a TCP transmit window (TWIN) using the real-time RTT measurements and RAB configuration.

A method and system for providing wireless backhaul in a wireless radio access network having an overall allocated access bandwidth for access communication, the system including a radio access base station designed for out-of-band backhaul, the base station including an access transceiver communicating over an allocated frequency channel within the overall allocated access bandwidth, and an in-band backhaul unit coupled to the access base station including means for in-band communication of backhaul of the access base station.

A method, an apparatus and a computer program product for configuring remote antenna units with communication properties in a radio access communication system employing a distributed antenna system (DAS) are provided. The method including configuring each of the one or more remote antenna units with remote-antenna-unit-specific communication properties dynamically during communication.