6692results about "Dc source parallel operation" patented technology

A power subsystem is actively optimized to improve total subsystem efficiency in a way that is responsive to changes in load requirements, power supply variations, and subsystem temperature variations. Detailed, multidimensional power loss models are developed for constituent devices which are then combined into a power subsystem containing a controller and circuity for measuring device operating parameters such as input and output voltage, output current, and temperature. Operating parameters are continually monitored, and set points are correspondingly changed based on the detailed power loss models to achieve maximum overall efficiency for the instantaneous operating state of the system.

A system for providing power to a wireless card includes power interface that provides power to a compact flash card. A boost regulator boosts the power from the power interface. A battery provides power that is summed with the power from the power interface. Moreover, a buck regulator limits the voltage of the summed power. A compact flash card can be powered by the power interface while a wireless card can be powered by the summed power.

A highly phased power regulation (converter) system having an improved control feature is provided. A controller, such as a digital signal processor or microprocessor, receives digital information from a plurality of power conversion blocks and transmits control commands in response to the information. The controller is able to change the mode of operation of the system and / or re-phase the power blocks to accommodate a dynamic load requirement, occasions of high transient response or detection of a fault. A compensation block within the controller is used to regulate the output voltage and provide stability to the system. In one embodiment, the controller is implemented as a PID compensator controller. In another embodiment, a microprocessor is able to receive feedback on its own operation thus providing enabling the controller to anticipate and predict conditions by analyzing precursor data.

This disclosure describes techniques for operating a corded electronic device in which a battery and a power control unit manage power draw from an external power source electrically coupled to the corded electronic device using a physical cord, such as a universal serial bus (USB) cable. The power control unit automatically supplements an electrical current continuously drawn by the corded electronic device from the external power source with an electrical current from the battery, when needed. Moreover, the power control unit operates to limit the current drawn from the external power source and the physical cord so as to ensure the current does not exceed any limitations or requirements associated with the external power source or the physical cord.

A power management system for a lighting circuit may include a grid shifting controller that includes a processor and a connection to an external power source. The power management system may also include a communication interface associated with the grid shifting controller. The grid shifting controller may be configured to provide control information to a processor of at least one grid shifting electrical fixture over the communication interface, the control information being configured to direct the at least one grid shifting electrical fixture on the use of power from the external power source and an energy storage device associated with the at least one grid shifting electrical fixture.

The invention relates generally to systems, devices and methods for the efficient use of utilities, more particularly to the distribution and provision of electricity supply at appropriate voltages, monitoring and usage by end devices, and to facilitating consumers in changing their energy usage behaviour, and to adopt and easily install appropriate sustainable, energy efficient or renewable technologies. Said end devices typically including traditional electric, electronic and lighting appliances requiring AC or DC power provision or low voltage DC power via AC / DC converters.

Distributed maximum power point tracking systems, structures, and processes are provided for power generation structures, such as for but not limited to a solar panel arrays. In an exemplary solar panel string structure, distributed maximum power point tracking (DMPPT) modules are provided, such as integrated into or retrofitted for each solar panel. The DMPPT modules provide panel level control for startup, operation, monitoring, and shutdown, and further provide flexible design and operation for strings of multiple panels. The strings are typically linked in parallel to a combiner box, and then toward and enhanced inverter module, which is typically connected to a power grid. Enhanced inverters are controllable either locally or remotely, wherein system status is readily determined, and operation of one or more sections of the system are readily controlled. The system provides increased operation time, and increased power production and efficiency, over a wide range of operating conditions.

An apparatus for converting power includes at least one impedance matching network which receives an electrical signal. The apparatus includes at least one AC to DC converter in communication with the impedance matching network. Also disclosed is a method for powering a load and an apparatus for converting power and additional embodiments of an apparatus for converting power.

A distributed power harvesting system including multiple direct current (DC) power sources with respective DC outputs adapted for interconnection into a interconnected DC power source output. A converter includes input terminals adapted for coupling to the interconnected DC power source output. A circuit loop sets the voltage and current at the input terminals of the converter according to predetermined criteria. A power conversion portion converts the power received at the input terminals to an output power at the output terminals. A power supplier is coupled to the output terminals. The power supplier includes a control part for maintaining the input to the power supplier at a predetermined value. The control part maintains the input voltage and / or input current to the power supplier at a predetermined value.

A look-up table assists a source of logic of an apparatus in determining the power requirements of an unknown battery-powered device, so that a configurable power supply adjusts its output to provide the correct power to the device. The functions of the look-up table, in conjunction with generic templates and update-able historical information, if available, are substantially based on determining a “power signature” of the device. As a secondary function, the look-up table enables detection of battery charging activity and, when necessary, provides various means of disabling charging operations. More than one look-up table is available, and a look-up table can be located at any inter-connected device, apparatus, or power source. Inter-device communications further enhance the functionality of the look-up table, especially for collaborative data-acquisition.

Disclosed is a system for wirelessly powering an item. A source is configured to send wireless power. A target is configured to receive the wireless power and convert the wireless power to a useable power. A component is connected to and configured to receive the useable power from the target. When the component receives the usable power, the component activates. Also disclosed is an assembly including a system for wirelessly powering a component and a structure for supporting the system and an item.

A load control system may include load control devices for controlling power provided to an electrical load. The load control devices may include a control-source device and a control-target device. The control-target device may control the power provided to the electrical load based on digital messages received from the control-source device. A user device may discover load control devices when the load control devices are within an established range associated with the user device. The user device and the load control devices may communicate via a wireless communications module. The established range may be adjusted based on the configurable transmit power of the user device or the wireless communications module associated with the user device. A discovered control-target device may be associated with a control-source device to enable the control-target device to control the power provided to the electrical load based on digital messages received from the control-source device.

One or more outdoor lights may operate independently with sensing and control processes mainly on-pole, or may communicate as a networked array of poles, wherein a master / coordinating pole / node transmits signals from the networked array to a control station, and receive signals from the control station for the networked array, via call phone and / or satellite. Independent poles and / or the networked array of poles may be adapted for energy-saving processes; cooperation with the grid; renewable power production and storage by means of solar panels and associated batteries; and / or to provide Wi-Fi hot-spots, public safety alarms, information or data-analysis to the public or customers. An energy-saving active control system controls charging of the batteries and distribution of energy from the solar panel and / or the batteries, so that the batteries remain undamaged, and the light(s) remain operation even during the winter or other long periods of clouds and diffuse light. The active control of energy distribution by a load controller function may include dimming during the night, except when sensors detect motion, and, in extreme cloudy or diffuse-light periods, increasing increments of dimming and / or load shedding, to preserve the batteries and operability.

Systems and methods to balance currents among a plurality of photovoltaic units connected in series. In aspect, a management unit is coupled between a photovoltaic energy production unit and a string of energy production units. The management unit has an energy storage element (e.g., a capacitor) connected to the photovoltaic energy production unit. The management unit further has a switch to selectively couple to the energy storage element and the photovoltaic energy production unit to the string. The management unit allows the current in the string to be larger than the current in the photovoltaic energy production unit.

This invention relates to a power module for a plug-in hybrid electric vehicle including an integrated converter having a rectifier changing AC to DC, a DC / DC converter changing from a first voltage to a second voltage, and a battery storing electrical energy. The integrated converter operates in three modes 1) AC plug-in charging mode, 2) boost mode supplying power from the battery to the electrical bus and 3) buck mode supplying power from the electrical bus to the battery. The integrated converter utilizes the same single inductor during each of the three operating modes to reduce cost and weight of the system.

A power and control architecture employing circuitry that sequentially regulate power flows from independent solar-array sources or a mixture of power sources providing power to a common load. The device may be used on a satellite with solar-array sources; however it may also be used on ground based systems. Stiff bus voltage regulation is obtained by tightly controlling the most recently activated power-processing channel while keeping the previously activated power-processing channels in the Maximum Power Tracking mode to supply maximum power to a common load. The remaining power-processing channels are turned off or operated in stand-by mode. In an alternative system, with primary design goal of uniform power sharing among solar-array sources, all solar array sources are activated with uniform power sharing at light load and, as load demand increases, sequentially controlled to operate in the Maximum Power Tracking mode one solar array source at a time as necessary.

A static inverter for a battery of elementary, current sources or cells electrically in series and a number N of intermediate voltage taps along the chain of elementary DC current sources, wherein the number of elementary cells comprised between an intermediate tap and another intermediate tap adjacent to it or an end terminal of said chain is proportionate to the amplitude in the respective phase interval of a number N of discretization phases of the waveform of the AC voltage to be output in a quadrant; is implemented by arranging for: a number N of power switches each connecting a respective intermediate tap and a first end terminal of a first polarity of said chain of elementary cells in series to a common circuit node of said first polarity; an output bridge stage constituted by at least four power switches controlled in pairs for switching the current paths through the bridge stage, having a first pair of nodes coupled to said common circuit node of said first plurality and to the other end terminal of polarity opposite to said first polarity of said chain of elementary cells, respectively, and a second pair of nodes constituting an AC output; and a control circuit sequentially and cyclically turning on, in a continuous manner, one switch at the time of said N switches; each for a phase interval of 1 / (4N) times the period of said AC output, and alternately tuning on by pairs said four power switches of said output bridge stage at every half a period.

An energy scavenging power system and method may include an energy conversion system having at least one transducer configured to harvest energy, an energy management and storage system configured to store harvested energy; and a load regulation system configured to provide stored energy to power one or more low power-consumption loads. The energy management and storage system may include a start-up capacitor having a small capacitance to allow for quick charging and fast turn-on, a short term capacitor to provide energy to the load or loads once turned-on, and a long term capacitor having a large capacitance to provide for sustained energy delivery to the loads. The system also may include a common charging bus that receives energy from each transducer, conditioned if necessary, and which then determines the capacitor to which the energy should be delivered.

A charging system for simultaneously charging the batteries of a plurality of battery powered vehicles. The charging includes one or more DC-DC power converters having one or more charging ports configured to plug into the batteries. The DC-DC power converters are each configured to selectively connect to more than one charging port to selectively provide for higher port power levels. The DC-DC power converters connect to an AC rectifier through a DC bus. The AC rectifier connects to an AC power source having a limited power rating. The AC charging system also has a controller that controls the operation of the DC-DC power converters such that the total power draw on the AC rectifier does not exceed the power rating. The system is further configured such that the DC-DC power converters can drain selected batteries to obtain power for charging other batteries, thus allowing for batteries to be cycled.

A method to convert direct current (DC) power generated by a photovoltaic (PV) arrays to alternating current (AC) power using a PV inverter, the method includes: applying the DC power generated the PV array to the PV inverter; boosting the DC power from the PV array from a predetermined voltage level to a predetermine DC link voltage, wherein the PV array is regulated by the boosting to output a voltage at the predetermined voltage level; converting the boosted DC power to AC power, and disabling the boost of the power generated by the PV array after the array has a predetermined voltage level at least as great as the DC link voltage.

An inductive power transfer system (1) comprises a primary unit (10) operable to generate an electromagnetic field and at least one secondary device (30), separable from the primary unit, and adapted to couple with the field when the secondary device is in proximity to the primary unit so that power can be received inductively by the secondary device from the primary unit without direct electrical conductive contacts therebetween. The system detects if there is a substantial difference between, on the one hand, a power drawn from the primary unit and, on the other hand, a power required by the secondary device or, if there is more than one secondary device, a combined power required by the secondary devices. Following such detection, the system restricts or stops the inductive power supply from the primary unit. Such a system can detect the presence of unwanted parasitic loads in the vicinity of the primary unit reliably.

A primary device for inductive power transfer to a secondary device is disclosed. The primary device includes a primary coil, the primary device being configured to (i) operate in a first mode during which the primary coil transfers power through inductive coupling to the secondary device, and (ii) operate in a second mode during which a foreign object is detected. The primary device further includes a primary controller configured to operate the primary coil (i) using a first frequency during the first mode, and (ii) using a second frequency during the second mode. A method to detect a foreign object which is in proximity of an inductively coupled environment of a primary device is also disclosed.

A new system-level approach to managing the delivery of DC voltage and current. Several system level functions may be enabled without requiring separate ICs to perform those functions. Supervisory functions for a voltage converter may be performed by a central control module or chip that may be coupled to point-of-load voltage converters comprised in digital power management devices (DPMD) through a serial digital bus. The DPMDs may also use the high-speed serial digital bus to provide real-time feedback information to the central control module or chip. Single DPMDs may be combined together in a current sharing configuration in a “plug-and-play” fashion, where the control logic in each DPMD is capable of automatically establishing control loops required a multi-phase supply. Feedback necessary for establishing control may be transmitted across the digital bus coupling the devices. The supervisory functions may be included in each DPMD, which may communicate with each other over a serial digital bus, where the DPMDs singly or together may operate to perform control of their respective POLs, enabling configurations that do not require a central control module.

A distributed power system including multiple (DC) batteries each DC battery with positive and negative poles. Multiple power converters are coupled respectively to the DC batteries. Each power converter includes a first terminal, a second terminal, a third terminal and a fourth terminal. The first terminal is adapted for coupling to the positive pole. The second terminal is adapted for coupling to the negative pole. The power converter includes: (i) a control loop adapted for setting the voltage between or current through the first and second terminals, and (ii) a power conversion portion adapted to selectively either: convert power from said first and second terminals to said third and fourth terminals to discharge the battery connected thereto, or to convert power from the third and fourth terminals to the first and second terminals to charge the battery connected thereto. Each of the power converters is adapted for serial connection to at least one other power converter by connecting respectively the third and fourth terminals, thereby forming a serial string. A power controller is adapted for coupling to the serial string. The power controller includes a control part adapted to maintain current through or voltage across the serial string at a predetermined value.

The power of DC electrical sources is combined onto a DC buss, such that each source behaves independently from any other source attached to the buss. In one embodiment, a converter module is attached to each of a plurality of solar photovoltaic panels and its output is attached in a parallel manner to a common buss that forms the input to a DC AC inverter. The converter module includes a Maximum Power Point Tracking component that matches the output impedance of the panels to the input impedance of the converter module. The converter also includes a communication component that provides parametric data and identification to a central inverter. Data generated by each converter module is transmitted over the power line or by wireless means and is collected at the inverter and forwarded to a data collection and reporting system.

A large-scale, capacitor-based electrical energy storage and distribution system capable of effectuating load-leveling during periods of peak demand on a utility, and of effectuating a cost savings associated with the purchase of electrical energy. A capacitor or multitude of capacitors may be charged with electrical energy produced by the utility, such as during periods of low demand or low cost, and discharged during periods of high electrical energy consumption or high electrical energy cost. One or more capacitors may be located at a consumer's residence or business. Alternatively, a farm of capacitors may be provided at or near a utility, or at or near a location experiencing high demand. In another embodiment, one or more capacitors may be located in or on a vehicle, such as an automobile, a truck, or a train of a light rail system.

The present invention provides a method, computer program product, and apparatus and control system and method for providing substantially uninterrupted power to a load. The apparatus includes a control system coupled with an electrical power storage subsystem and a electrical power generator. The control system is configured to provide a plurality of modes of operation including at least a static compensator (STATCOM) mode, an uninterruptible power supply (UPS) mode and a generator mode (gen set), and to control transitions between each of the plurality of modes. In one embodiment, the control system is an integrated closed loop control system that includes a current control system and a voltage control system. The apparatus is capable of operating at least two of the plurality of modes simultaneously, including ramping the gen set mode up and simultaneously ramping the UPS mode down as the gen set mode is ramped down.