43028 results about "Battery pack" patented technology

A safety charging system for a battery-operated surgical hand includes a charging base, a battery pack, and control logic. The charging base has an RFID reader antenna disposed near a top surface of the charging base and charge circuitry for charging the battery. The battery pack has the battery used with the hand piece and an RFID tag antenna disposed near a bottom surface of the battery pack. The control logic determines if the battery should be charged based on a data point read by the RFID reader antenna.

A portable electric nailing gun operating from a power supply. The motor accelerates a flywheel, which at the appropriate energy state is coupled through a mechanism to an anvil acting directly on the nail. The actuation is governed by a control circuit and initiated from a trigger switch. The stored energy delivered from the motor is coupled to the output anvil drives the nail. At least one position of the output anvil is sensed and once the nail is driven, the power is disconnected from the motor. This method uses a direct acting clutch and a harmonic motion nailing mechanism to reduce wear and increase robustness of the nailer. Elastic elements are used to limit stresses during the impact periods. The electrical control circuit and sensors allow precise control and improve safety. The power supply is preferably a rechargeable low impedance battery pack.

A surgical instrument having a locking mechanism for preventing an output shaft of the surgical instrument from rotating and a further locking mechanism for mounting a battery pack to a distal end of a housing of the surgical instrument. The surgical instrument further includes a clutch mechanism for limiting the torque of a drive shaft of the surgical instrument. The locking mechanism for preventing the output shaft from rotating includes a locking switch which mates with a locking cap disposed on the output shaft. The locking mechanism for mounting the battery pack to the housing includes a groove at the distal end of the housing and a retaining ring which engages the groove when the battery pack is mounted on the housing. The clutch mechanism includes a clutch plate that interfaces with both the output shaft and the drive shaft and prevents failure of the motor shaft.

A tunable frangible battery pack system for use in an electric vehicle is disclosed. The tunable frangible battery pack system includes a two piece clamshell housing. The system also includes a plurality of battery cells arranged within the housing and a collector plate secured to each piece of the housing. The system also includes a wire conductor arranged between each of the battery cells and collector plates to create a frangible disconnect system when the battery pack system and electric vehicle are exposed to a predetermined mechanical or thermal force or event.

A portable presentation unit for sterilizing, charging, and testing components of a cordless surgical instrument is disclosed including a battery charger unit configured to recharge a battery pack of the cordless surgical instrument, a testing unit configured to test at least one of the battery pack or a reusable transducer / generator unit of the cordless surgical instrument, and a sterilization unit configured to sterilize at least one of the battery pack or the transducer / generator unit.

A battery pack which includes a battery pack electronic control circuit adapted to control an attached power tool and / or an attached charger. The battery pack includes additional protection circuits, methodologies and devices to protect against fault conditions within the pack, as the pack is operatively attached to and providing power to the power tool, and / or as the pack is operatively attached to and being charged by the charger.

A shock proof structure of a battery pack for receiving a battery cell is formed in an electrical tool. The battery pack includes a base having a space for receiving the battery cell and a lid for opening or closing the space. The space has a plurality of first buckling portions separated by a gap disposed at a bottom side thereof. A plurality of second buckling portions with shock absorbance is formed at an inner sidewall of the lid. The plate sets include two plates separated by a gap are symmetrically positioned. The plates of each plate set have a second buckling portion with a stretching gap formed in between. The second buckling portion is positioned at the opposite end of the first buckling portion to provide the battery cell to be steadily buckled between the first and the second buckling portions.

An improved hand-held fastener driving tool is provided with an adjustable torque limiting control. The tool is portable, and is electrically powered using either a battery pack or a power cord as a power source. The tool drives collated fasteners (e.g., screws) into solid objects. The motor current is measured to determine the amount of torque being applied to a screw by the motor and mechanical drive components. As the screw bottoms out, the motor torque increases to a point where it exceeds the user-adjusted torque limiting control. The motor is automatically turned off at that point, thereby preventing the screw from being stripped.

A portable data terminal including an elongated housing and a vertical grip. The housing has a battery well that extends traverse to a longitudinal axis of the housing. A battery pack has a longitudinal axis that, when seated in the battery well, extends traverse to a longitudinal axis of the housing, the battery pack having an integrated latch that engages a recess in the battery well.

A first battery assembly is in a first battery housing that is mechanically engageable with a portable computer, and a second battery assembly is in a second battery housing that is mechanically couplable to the first battery housing. A switch has a first configuration in which communication is established between the portable computer and the first battery assembly and a second configuration in which communication is established between the portable computer and the second battery assembly.

A battery pack for a use with a powered surgical tool. The battery pack may include a housing with an outer wall and opposing first and second ends. The housing may include an elongated shape that extends between the first and second ends. A first member may extend across the first end of the housing and include a first aperture, and a second end member may extend across the second end of the housing and may include a second aperture. A passage may extend through the housing with a first end that aligns with the first aperture and a second end that aligns with the second aperture. The housing may be sized for a plurality of storage locations positioned between the first and second members and around the passage, and each of the storage locations may be configured to store a power cell.

A battery assembly with a housing that contains a removable battery pack. The housing, which is sterilizable, has a head designed to couple to a power consuming device. The battery pack, which is not sterilizable, contains at least one rechargeable cell. The battery pack has a head dimensioned to fit the same charger socket that can receive a sterilizable battery. The battery pack has contacts that abut charger contacts. The housing has internal contacts. Collectively, the housing and battery pack are shaped so that, when the battery pack seats in the housing, the battery pack contacts abut the housing internal contacts. The housing internal contacts are connected to the housing external contacts for supply power to the power consuming device. A cover selectively holds the battery pack in the housing chamber.

Disclosed is a water-discharging device of a high voltage battery pack that can automatically adjust the level of water collecting in an under cover such that high voltage parts, such as an expensive battery module and a BMS, equipped in the under cover are not damaged by the water, by making the BMS operate a water pump to forcibly discharge the water out of the under cover, when the water collects and increases in level in the under cover having a sealed structure.

A battery pack has a charge and discharge count measuring part (131) configured to measure the number of times of charges and discharges of a secondary battery based on the summed value of the charge current for the secondary battery, and a decay rate output part (132) configured to compute a decay rate that indicates a degree of decay of the secondary battery based on the number of times of charges and discharges measured by the charge and discharge count measuring part (131) and to output it to a device being a discharge load. For example, the charge and discharge count measuring part (131) repeatedly sums the detected values of the charge current to a predetermined threshold, and counts up the number of times of charges and discharges every time when the summed value reaches the threshold. Accordingly, even though charges and discharges are repeated at finer steps in a relatively narrow voltage range, the number of times of charges and discharges can be counted accurately, and the computing accuracy of the decay rate is improved. In the battery pack in which the secondary battery is accommodated, parameters for detecting the remaining amount of the battery are detected more accurately.

A powered handle for a surgical stapler can have a drive system including an electric motor. The powered handle can include a manual articulation mechanism to articulate a jaw assembly coupled to a reload shaft connected to the handle. The manual articulation mechanism can include a ball screw mechanism that translates an articulation member responsive to rotation of an articulation knob when an instrument shaft is engaged with the handle. The articulation mechanism includes a release function that allows the jaw assembly to return to a longitudinally centered orientation. The powered handle includes a battery pack serving as a power supply for the drive system. A control system can control actuation of the motor based on user inputs and operating parameters of the stapler and can provide certain motor drive profiles for predetermined positions of the stapler. The powered handle can include a manual return mechanism.

A surgical instrument includes a shaft, an end effector extending distally from the shaft, and a housing extending proximally from the shaft. The housing includes a motor configured to generate at least one motion to effectuate the end effector, and a power source configured to supply power to the surgical instrument, wherein the power source includes a casing, a data storage unit, and a deactivation mechanism configured to interrupt access to data stored in the data storage unit. In addition, the power source includes a battery pack and a deactivation mechanism configured to deactivate the battery pack if the casing is breached.

One or more embodiments may include a trip planning system for planning a trip based on the charge of an electric vehicle battery. The trip planning system may include one or more computers located remotely from an electric vehicle which may have one or more battery packs for powering the electric vehicle. The computer(s) may be configured to receive geographic parameters defining a trip and a battery charge status of the one or more electric vehicle battery packs. The computer(s) may be further configured to determine that the trip cannot be completed based on the battery charge status. The computer(s) may additionally be configured to present a battery charge requirement for completing the trip.

The battery charger is capable of charging a battery pack 2. The battery charger is provided with a docking section 1 where the battery pack 2 can be attached for charging, and a charging section 3 with a charging circuit 40 to supply a given amount of charging power to the battery pack 2 attached in the docking section 1. The battery charger is characterized by the docking section 1 and charging section 3 having a detachable structure.

A light weight compact portable GPS receiver and transmitter for use on the person during outdoor activity, data logging receiver, data logging software supported by battery pack and modified active GPS patch antenna with chips, download connector, download docking station, charging units, mapping software to transfer the GPS data onto various maps including ortho-rectified, flat topographical maps, 3-D projection view topographical maps and street maps.

A surgical instrument includes a shaft, an end effector extending distally from the shaft, and a housing extending proximally from the shaft. The housing includes a motor configured to generate at least one motion to effectuate the end effector, and a power source configured to supply power to the surgical instrument, wherein the power source includes a casing, a data storage unit, and a deactivation mechanism configured to interrupt access to data stored in the data storage unit. In addition, the power source includes a battery pack and a deactivation mechanism configured to deactivate the battery pack if the casing is breached.

In a cordless power tool system, protection methods, circuits and devices are provided to protect against fault conditions within a battery pack that is operatively attached to a power tool or charger, so as to prevent internal or external damage to the battery pack or attached tool or charger. The exemplary methods, circuits and devices address fault conditions such as over-charge, over-discharge, over-current, over-temperature, etc.

A surgical procedure is disclosed utilizing a cordless surgical handpiece powered from a sterile battery pack that contains a battery in condition for immediate use without further charging or sterilization. The battery chemistry is based upon lithium / manganese dioxide, and the battery after a single use may be disposed of into non-hazardous waste. The compact surgical handpiece has a brushless DC motor and a manually operated external trigger for activating and controlling the motor operations. Interengaging sets of contacts on the handpiece and battery are adapted to become lockingly and conductively interengaged upon rotation of the battery pack relative to the handpiece, in a manner that rapidly achieves correct alignment of the parts and also ensures stable mechanical attachment and support during the surgical procedure.

Disclosed is a wireless surround sound speaker system wherein a transmitter broadcasts a variety of FM signals that correspond to the individual speaker channels commonly found in a surround sound system. Receivers, individually equipped with signal receiving, conditioning and amplification components, are configured to receive any one of the broadcast signals in a remote location and are used to drive a conventional loudspeaker in that location. Powered by wall socket or via DC battery packs, the receivers, used in conjunction with the transmitter, provide surround sound capabilities without the need for complex and difficult wiring.