5642 results about "Detector" patented technology

Apparatus, method, logic arrangement and storage medium are provided for increasing the sensitivity in the detection of optical coherence tomography and low coherence interferometry (“LCI”) signals by detecting a parallel set of spectral bands, each band being a unique combination of optical frequencies. The LCI broad bandwidth source can be split into N spectral bands. The N spectral bands can be individually detected and processed to provide an increase in the signal-to-noise ratio by a factor of N. Each spectral band may be detected by a separate photo detector and amplified. For each spectral band, the signal can be band p3 filtered around the signal band by analog electronics and digitized, or, alternatively, the signal may be digitized and band pass filtered in software. As a consequence, the shot noise contribution to the signal is likely reduced by a factor equal to the number of spectral bands, while the signal amplitude can remain the same. The reduction of the shot noise increases the dynamic range and sensitivity of the system.

A security system that secures a building includes a weather detector for detecting weather conditions, such as thunder or high winds, which are likely to cause false alarms in sensors such as an acoustic glass break sensor, shock sensor and vibration sensor. The weather detector may include a sensing component that senses atmospheric conditions external to the building, such as temperature, pressure, wind speed and / or lightning. The weather detector may also include a component for receiving a data communication, such as from a radio, Internet, or telephone link, indicating that the weather condition is present in a vicinity of the building. The security system operates in a bad weather mode by requiring corroboration of intrusion detection signals from the sensors that can cause false alarms.

A base station having the strongest downlink signal is identified by utilizing a unique slope of a pilot tone hopping sequence being transmitted by a base station. Specifically, base station identification is realized by determining the slope of the strongest received pilot signal, i.e., the received pilot signal having the maximum energy. In an embodiment of the invention, the pilot tone hopping sequence is based on a Latin Squares sequence. With a Latin Squares based pilot tone hopping sequence, all a mobile user unit needs is to locate the frequency of the pilot tones at one time because the pilot tone locations at subsequent times can be determined from the slope of the Latin Squares pilot tone hopping sequence. The slope and initial frequency shift of the pilot tone hopping sequence with the strongest received power is determined by employing a unique maximum energy detector.

The invention is directed to improved automatic dispenser apparatus for dispensing sheet material and the like without contact between a user and the dispenser. Proximity detection apparatus is provided to detect the presence of a user in a detection zone generated outside the dispenser. Control apparatus controls actuation of the dispenser in response to the detected user. Preferred forms of the proximity detector include a sensor and a signal detection circuit operatively connected to the sensor. The sensor includes conductors configured to have a capacitance and positioned such that the capacitance is changed by the presence of a user within the detection zone. The signal detection circuit detects the change in capacitance and is provided with an oscillator having a frequency which is affected by the sensor capacitance and a differential frequency discriminator which detects changes in the oscillator frequency. The control apparatus receives the detected frequency change and generates a signal provided to actuate the dispenser to dispense the material. The dispenser control apparatus controls dispenser operation responsive to decreases in battery voltage which occur during the life cycle of the batteries and controls dispenser operation when the batteries near the end of such life cycle. Such control apparatus may be used with any type of battery powered dispenser, including hands-free dispensers and dispensers actuated by direct physical contact with the user.

Apparatus and method for increasing the sensitivity in the detection of optical coherence tomography and low coherence interferometry (“LCI”) signals by detecting a parallel set of spectral bands, each band being a unique combination of optical frequencies. The LCI broad bandwidth source is split into N spectral bands. The N spectral bands are individually detected and processed to provide an increase in the signal-to-noise ratio by a factor of N. Each spectral band is detected by a separate photo detector and amplified. For each spectral band the signal is band pass filtered around the signal band by analog electronics and digitized, or, alternatively, the signal may be digitized and band pass filtered in software. As a consequence, the shot noise contribution to the signal is reduced by a factor equal to the number of spectral bands. The signal remains the same. The reduction of the shot noise increases the dynamic range and sensitivity of the system.

An endpoint or other communication device of a communication system includes a clock recovery module. The communication device is operative as a slave device relative to another communication device that is operative as a master device. The clock recovery module comprises a clock recovery loop configured to control a slave clock frequency of the slave device so as to synchronize the slave clock frequency with a master clock frequency of the master device. The clock recovery loop utilizes a frequency error estimator implemented as a maximum-likelihood estimator with slope fitting based on a sequence of arrival timestamps, and a loop filter implemented as a series combination of an adaptive-bandwidth filter and a proportional-integral controller. The clock recovery module may further comprise a discontinuity detector configured to detect a discontinuity in delays of respective timing messages, and a loop controller operative to place the clock recovery loop in a particular state responsive to detection of the discontinuity.

A repeatable run-out (RRO) detector employs one or more digital interpolators to interpolate asynchronous sample values representing an RRO address mark (AM) and RRO data, and an asynchronous maximum-likelihood (AML) detector to detect the RRO AM. The AML detector selects one of either the asynchronous or interpolated sample sequences that are closest in distance to the ideal RRO AM sample sequence. In addition, a gain value is generated for each of the asynchronous and interpolated sample sequences. Once the RRO AM is detected, the AML detector provides a RRO AM found signal. Gain estimate values for either the selected asynchronous or selected interpolated sample sequences corresponding to the RRO AM found signal are averaged over a predefined number of detection events to generate a best gain error metric (BGEM). The BGEM is employed to adjust the gain of the asynchronous sample sequence.

An RF transmitter (30) includes an RF power amplifier (32) for which the power input bias voltage (40) and signal input bias voltage (80) are controlled within feedback loops. A peak detector (44) generates a lowered-spectrum, peak-tracking signal (34) that follows the largest amplitude peaks of a wide bandwidth communication signal (16) but exhibits a lower bandwidth. This signal (34) is scaled in response to the operation of a drain bias tracking loop (146) then used to control a switching power supply (36) that generates the power input bias voltage. The tracking loop (146) is responsive to out-of-band power detected in a portion of the amplified RF communication signal (16″). A ratio of out-of-band power (128) to in-band power (126) is manipulated in the tracking loop (146) so that the power input bias voltage is modulated in a way that holds the out-of-band power at a desired predetermined level.

A portable telephone allowing easy and accurate estimation of its moving speed at the moment when an incoming call is received is disclosed. A moving status detector is provided which detects a moving status of the portable telephone based on measured reception signal strengths, each of which is measured on a sequentially selected one of N neighboring radio channels that are previously designated by the base station at a timing other than a communication timing of the designated radio channel in response to receipt of a call setup signal for an incoming call from the base station using the designated radio channel.

A partial response maximum likelihood (PRML) data detecting in a magnetic recording storage device is carried out with a preliminary measuring of write-read channel responses to all nonzero binary combinations of a given length. Decoding of the user data is performed according to a Viterbi algorithm, where the previously measured responses are used as expected samples for branch metric calculations. The measurement of the write-read channel responses and the decoding of the user data are fulfilled by a self-adjusting PRML receiver that contains a controllable clock recovery, a responses accumulator and an adjustable Viterbi detector. The controllable clock recovery produces a set of read-back signal samples containing exactly one sample per bit with or without phase error correction. The responses accumulator calculates averaged responses of the write-read channel. The adjustable Viterbi detector reconstructs the user data that were written to the disk.

Provided are an envelope processor 103, for obtaining an envelope for a detected signal; a FFT unit 104, for converting the envelope into a frequency spectrum; a peak detector 105, for smoothing the frequency spectrum by calculating a moving average, for further performing smoothing and differentiation for the spectrum, and detecting, as peaks, frequency points at which a sign of a differential coefficient is changed from positive to negative, for extracting peaks having a predetermined threshold value or greater, and for sorting the extracted peaks and detecting upper peaks; and a diagnosis processor T, for diagnosing an abnormality based on the detected peaks.

A circuit for providing power factor correction in accordance with an embodiment of the present application may include a boost converter circuit and a control circuit receiving as inputs a rectified AC input voltage from a rectifier, a signal proportional to current through the boost inductor and the DC bus voltage across the capacitor of the boost converter. The control circuit provides a pulse width modulated signal to control the on time of a PFC switch. The control circuit further includes a voltage regulator and a current regulator. The current regulator includes a difference device operable to subtract a signal proportional to the inductor current from the current reference signal, a PI controller adapted to receive the output of the difference device and provide a first control signal, a feed forward device operable to receive the rectified AC input voltage and to provide a second control signal with a smaller dynamic range than the AC input voltage, and an adder operable to add the first control signal to the second control signal to provide a PWM reference signal for generating the pulse width modulated signal. A zero crossing detector and vector rotator may be provided to provide a clean sinusoidal reference to the current regulator. A partial PFC regulator may be provide to provide partial mode PFC if desired.