Product
Patsnap Eureka
For R&D, Patsnap Eureka makes reading and utilizing patents & technical documents easy.
Patsnap Eureka AIR
Designed for self-driven R&D workflows. Generate viable solutions, solve complex R&D challenges, empower your innovation with AI.
Patsnap Eureka Materials
Designed for material experts only. Revolutionize your material R&D, from search, analyze, to developing new materials.
Feature
TechResearch
Generate reliable direction feasibility study reports for your R&D in just a few steps.
TechSeek
Discover and master advanced knowledge NOW. Basics, ideas, possibilities, all at once.
TechMind
As an expert in R&D Theories, TechMind can generates customized viable solutions instantly.
TechRisk
Analyze your overall solution with one click, know your potential R&D risks in advance.
TechMonitor
Get weekly tech updates, stay abreast of the latest tech innovations and key insights.
Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
54results about How to "Small amount of energy" patented technology
Efficacy Topic
Property
Owner
Technical Advancement
Application Domain
Technology Topic
Technology Field Word
Patent Country/Region
Patent Type
Patent Status
Application Year
Inventor
High Sensitivity RFID TAG Integrated Circuits
InactiveUS20070046369A1Reduce the required powerMore sensitiveCharge amplifiersRecord carriers used with machinesElectricityTag antenna
A method and apparatus for an ultra-high sensitivity, low cost, passive (no battery) low-power energy harvesting data transmitting circuit energy, such as a RFID (Radio Frequency IDentification) tag integrated circuit “chip.” By using combinations of special purpose design enhancements, the low-power energy harvesting passive data transmitting circuit, such as the RFID tag chip, operates in the sub-microwatt power range. The chip power should be derived from a low-microwatt per square centimeter RF field radiated to the RFID tag antenna from the tag reader (interrogator) or derived from a suitable low signal source, such as a sonic transducer (e.g., a piezoelectric transducer or a low level DC source, such as a bimetallic or chemical source).
Owner:INNURVATION IP LLC
Sensor-network processors using event-driven architecture
InactiveUS20060075210A1Life maximizationLow-overhead transitionsPower managementMeasurement devicesMultiple sensorNetwork simulation
Event-driven processor architectures are particularly suited for use in multiple sensor node networks and simulators of such networks. A first variation of the processor is particularly suited for use in a sensor node in a wireless sensor network. Through use of the event-driven architecture and special message and timing coprocessors, this embodiment of the invention is optimized for low energy requirements and data monitoring operations in sensor networks. A second embodiment of the invention includes modifications necessary for use of the processor in a network simulation protocol.
Owner:CORNELL RES FOUNDATION INC
Ventilation device
InactiveUS20030159802A1Reduced Power RequirementsReduce outputMechanical apparatusEfficient regulation technologiesCounter flowEngineering
The invention relates to a ventilation device for ventilation room by room and / or zone by zone and comprises: a) a device casing (12), which is provided in or adjacent an outer wall of a building or the like and which connects room air to outside air, b) a heat-exchange (22) of counter flow type, provided in the casing (12) and transferring heat from the outgoing and in-going airflows, respectively, c) two fans (18,20) arranged in said casing (12), of which one is connected to the ingoing air duct (14) of the heat-exchanger (22) and the other to the outgoing air duct (16) of the heat-exchanger (22), d) at least one sensor (30) for determination of the airflow's relative deviation in velocity from a neutral value of the airflows passing through each respective duct (14, 16), and e) a control means (32), which, depending on the values given by the sensor (30), is arranged to regulate the rotation speed of the fans (18, 20), for the purpose of substantially balancing the airflow, so that it is substantially equal for the ingoing and outgoing air.
Owner:STENEBY BENGT +1
Production of capsules and particles for improvement of food products
InactiveUS6989169B2Uniform sizeSmall amount of energyCeramic shaping apparatusSolid materialInstabilityEngineering
The present invention is related to the production of capsules or particles of micro and nanometric size, for introduction into food, using stable electrified coaxial jets of two immiscible liquids with diameters in the micro and nanometric range. An aerosol of charged structured droplets forms when the jets dissociate by capillary instabilities. The structured droplets, which are mano-dispersed in size, contain a first liquid (generally the material desired to be added) that is surrounded by a second liquid. Generally the second liquid provides a barrier or protective coating which allows the addition of the first liquid to a food product without adversely affecting the organoleptic or other properties of the food product.
Owner:KRAFT FOODS GRP BRANDS LLC
Air-conditioning system for vehicle
InactiveUS20080011005A1Weaken energyEasy to useAir-treating devicesCompression machines with several evaporatorsNuclear engineeringAir conditioning
In an air-conditioning system for a vehicle, which has multiple heat sources (an evaporator and a heat accumulator), either one of the heat sources, for which the input energy amount for the unit cooling capacity is smaller than that for the other heat source, is preferentially used for performing the cooling operation, an energy amount for the air-conditioning operation can be reduced.
Owner:DENSO CORP
Production of capsules and particles for improvement of food products
InactiveUS20060057259A1Uniform sizeSmall amount of energyLiquid supply arrangementsMeat/fish preservationInstabilityEngineering
Owner:KRAFT FOODS INC
Multiple cooling sources for a vehicle air conditioning system
InactiveUS8001799B2Weaken energyEasy to useAir-treating devicesCompression machines with several evaporatorsAir conditioningCooling capacity
In an air-conditioning system for a vehicle, which has multiple heat sources (an evaporator and a heat accumulator), either one of the heat sources, for which the input energy amount for the unit cooling capacity is smaller than that for the other heat source, is preferentially used for performing the cooling operation, an energy amount for the air-conditioning operation can be reduced.
Owner:DENSO CORP
Solar powered smart ventilation system
ActiveUS8123142B2The process is convenient and fastSmall amount of energyPhotovoltaic supportsDucting arrangementsElectrical batteryRechargeable cell
A ventilation system comprising a fan to bring air into a building or exhaust air out of the building, a rechargeable battery to power the fan in the absence of an alternative energy source, and an alternative energy harnessing device to power the fan and to recharge the rechargeable battery in the presence of an alternative energy source. A sensor may be operatively connected to a controller or logic circuit to measure environmental factors, wherein the controller utilizes the measured environmental condition to select the power source with which to activate the fan. The ventilation system is configured to be a modular device with versatile fasteners for easy installment in windows or attics without the need for modification of the building, such as cutting holes.
Owner:THE SECURECASE
Method and system for using the waste heat of a computer system
InactiveUS20090114370A1Improve efficiencyUse waste heatDigital data processing detailsAir heatersComputerized systemWaste heat
A method for using the waste heat of a computer system with a plurality of processors comprises the following steps. Jobs in the computer system are distributed to the processors in such a way that processors of a first group of processors are operated with a high processor load and processors of a second group of processors are operated with only a minimal processor load. In another method, waste heat is dissipated from the processors by a cooling device, wherein the waste heat dissipated from the processors is regulated in such a way that the processor assumes a temperature that is greater than a given minimum temperature. In both cases, the waste heat of the processors is transferred to a device for using the waste heat.
Owner:KONIG CHRISTOPH
Illumination device for simulating channel letters
InactiveUS7118251B1Small amount of energyDevoid of hot spotsGlobesIlluminated signsElectricityEngineering
An illumination device generally comprises a housing, a light source, and a scattering member. The housing includes a base portion and a side wall, which collectively defines an interior cavity with an open end having a predetermined shape. A light source is positioned within the interior cavity, along with an electric connecting member adapted to connect the light source to a remote power source. A scattering member having substantially the same predetermined shape as the open end of the housing is positioned adjacent the light source at the open end of the interior cavity. The scattering member has a light-emitting surface and is composed of a material which causes light entering the scattering member to be directed through a portion of thereof before being scattered and emitted, such that a substantially uniform light pattern is perceived along the light-emitting surface of the scattering member in the predetermined shape.
Owner:ILIGHT TECH INC
Sterilization/Aseptization Apparatus
InactiveUS20100221155A1High bactericidal effectSmall amount of energyLavatory sanitoryEnergy based chemical/physical/physico-chemical processesUltravioletNitrogen
An aseptization apparatus 1 includes a sealed container 11 forming an aseptization space 191, a nitrogen gas supplying system 12 for converting atmosphere of the aseptization space 191 into nitrogen atmosphere, an electrode pair 13 disposed in the aseptization space 191, a pulse power supply 14 for repeatedly applying an electric pulse to the electrode pair 13, and a mirror 15 for returning a short-wavelength ultraviolet ray going from inside of the aseptization space 191 to outside to inside of the aseptization space 191. In a state where an aseptization object substance ST1 is present in a plasma generation region 192 between the electrode pair 13, the aseptization apparatus 1 causes a pulse electric field generated by electric pulse application to the electrode pair 13, a nitrogen radical 195 contained in plasma generated in nitrogen atmosphere resulting from fine streamer discharge, and a short-wavelength ultraviolet ray 196 emitted by nitrogen atmosphere resulting from fine streamer discharge to act on bacteria for aseptization of the aseptization object substance ST1.
Owner:NGK INSULATORS LTD
Semiconductor device and method for making the same
InactiveUS20010002726A1Improve protectionQuality improvementSemiconductor/solid-state device detailsSolid-state devicesSemiconductor chipElectrode
A semiconductor device includes a semiconductor chip having a main surface formed with an electrode pad, a package containing the semiconductor chip, a component element connected with the electrode pad within the package, a gold bump formed on the electrode pad, and a gold connecting member. The gold connecting member has an end bonded to the gold bump, and the other end bonded to the component.
Owner:ROHM CO LTD
Device and method for the treatment of skin, and use of the device
ActiveUS8821482B2Easily be safeguardedNon-invasive wrinkle reductionControlling energy of instrumentDiagnostic recording/measuringSkin treatmentsOptical breakdown
The invention provides a skin treatment device comprising a laser source (40) and focusing optics (50), such that a focal spot (18) is positioned in a dermis layer (24) of the skin to be treated. The laser beam (42) is powered and focused (16) such that a LIOB (laser induced optical breakdown) phenomenon is obtained, which affects the skin in order to stimulate re-growth of tissue. This in turn reduces wrinkles (30). The device may comprise wrinkle-determining means (52, 54, 56, 58). The focusing optics (50) may have a numerical aperture of at least 0.4. The invention also provides a corresponding method to treat skin, in particular to reduce wrinkles (30), by providing a focused laser beam (16) that causes LIOB in the dermis layer (24) of the skin. The advantage is that damage to overlaying epidermis layers may be avoided by the use of the very local LIOB phenomenon.
Owner:KONINKLIJKE PHILIPS ELECTRONICS NV
Waste treatment method
InactiveUS20060186042A1Small amount of energySignificant degreeTreatment using aerobic processesEnergy based wastewater treatmentEngineeringEnvironmental engineering
Disclosed is a system and method for treating domestic and industrial biological waste using diffusers to force circulation and aerate a treatment lagoon. Several lagoons may be used in series to treat raw waste and different variations may be employed to stepwise process the waste. A blend of aerobic and anaerobic microbes is chosen to remove undesired species initially present in the waste or later formed therein, as well as to process the waste itself, depending on the nature of the waste. Aeration with slightly ozonated or oxygenated air facilitates rapid and complete processing of large amounts of waste.
Owner:WATERPURE TECH +1
Active energy ray curable composition, cured product, composition storage container, two-dimensional or three-dimensional image forming apparatus, and two-dimensional or three-dimensional image forming method
An active energy ray curable composition is provided. The active energy ray curable composition includes a polymerizable monomer (A) and a polymerization initiator (B). The polymerization initiator (B) includes a skin-sensitizing polymerization initiator (B1) in an amount less than 1.0% by mass but not less than 0.1% by mass of the active energy ray curable composition, and 99.0% by mass or more of the active energy ray curable composition consists of non-skin-sensitizing constituents.
Owner:RICOH KK
Cataract Removal using Ultra-Short Pulse Lasers
ActiveUS20150290030A1High precision and localizationSmall amount of energyLaser surgerySurgical instrument detailsTotal cataractPulsed laser
A system and method of replacing a lens to treat a cataract is disclosed. Cataractous tissue is ablated via a multi-photon process using focused, ultra-short laser pulses. Multi-photon ablation requires an energy intensity between 1013 to 1015 W / cm2. Using lasers having femto-second duration pulses, this intensity is achieved with 50 micro-Joules of energy, allowing material disruption with very little heating or shock. The multi-photon ablated material is removed through a micro-channel that leads from the multi-photon ablated region to at least the surface of the eye. Once the material is removed a pre-polymer fluid is injected in to fill the void. This polymerizes into a gel once inside the lens. The polymerized, transformed material matches both the transparency to visible light and the Young's modulus of healthy lens.
Owner:FEMTO VISION LTD
Screw element for same-sense rotating multi-screw extruders
InactiveUS6974243B2Guaranteed uptimeFinish quicklyRotary stirring mixersMixing/kneading with horizontally-mounted toolsPropellerScrew thread
A screw element includes an outer radius Ra and a core radius Ri for multiscrew extruders with co-rotating and intermeshing screw shafts. The screw element has in axial cross section through its longitudinal axis a profile which has at each of the two axial end faces (i.e. a front end face and a rear end face) only one screw flight corresponding to a conventional single-start screw element for intermeshing screw shafts. In this case, the width (flight land angle φ) of the screw flight and conversely, in a corresponding way, the width (flight land angle φ) of the screw flight are formed in a special way and a shearing flight with a constant shearing flight radius Rs, which is greater than Ri, and less than Ra, is provided.
Owner:KRAUSSMAFFEI BERSTORFF GMBH
Sensor-network processors using event-driven architecture
InactiveUS7788332B2Life maximizationRemoving another sourcePower managementMeasurement devicesMultiple sensorArchitecture of Integrated Information Systems
Owner:CORNELL RES FOUNDATION INC
Electric connection element
InactiveUS20060272843A1Small amount of energyQuick buildSoldered/welded conductive connectionsCoupling contact membersRough surfaceElectricity
An electric connection element includes an electric conductor, and an electrically conductive coating which is applied onto the conductor and has, at least in regions thereof, a structuring and / or rough surface. As a result, the connection element can easily be handled and the coating can be quickly heated.
Owner:OUTOKUMPU COPPER NEUMAYER
Beverage dispensing system pressurized release liquid USPA2
InactiveUS20070175908A1Reduce physical laborImprove marketabilityClosuresLiquid dispensingEngineeringMechanical engineering
A liquid beverage dispensing system having a specialized sealed container and a tube which extends from a top of the container and terminates just before the floor of the container. The tube has a one way valve that allows liquid to come up and out of the container when the valve is opened. Before the valve is opened the liquid may be a carbonated liquid under pressure. Then the valve opens upon the user's action, such as, sucking or squeezing the nipple. When the valve is opened the pressure inside of the container exerted by rising or trapped air bubbles exerts a downward force on the liquid below. The downward force thereby pushes the liquid below into and up the tube and into the user's mouth. The one way valve having unique form characteristics to permit this operation and permit other operations.
Owner:SIRI ADAM
Method and apparatus for a high output sensor system
ActiveUS20060175931A1Small amount of energyAdapt their operationPiezoelectric/electrostrictive device manufacture/assemblyPiezoelectric/electrostriction/magnetostriction machinesElectricityEngineering
Owner:SAPURAST RES
Moving crane
InactiveUS20170015532A1Cheap constructionImproved weight distributionTrolley cranesLoad-engaging elementsEngineering
Owner:KONECRANES GLOBAL
Color filter ink, color filter ink set, color filter, image display device, and electronic device
InactiveUS20090134368A1Increased durabilityImprove uniformityDiffusing elementsOptical filtersPolymer sciencePhthalocyanine
A color filter ink is adapted to be used to manufacture a color filter by an inkjet method. The color filter ink includes a main pigment, a secondary pigment, a solvent and a curable resin material. The main pigment includes a halogenated phthalocyanine zinc complex. The secondary pigment includes a sulfonated pigment derivative. The curable resin material includes a first polymer and a second polymer. The first polymer includes at least an alkoxysilyl-containing vinyl monomer represented by a first prescribed chemical formula as a monomer component. The second polymer includes at least a fluoroalkyl-containing or fluoroaryl-containing vinyl monomer represented by a second prescribed chemical formula as a monomer component.
Owner:SEIKO EPSON CORP
Refrigerant compressor arrangement
InactiveUS20090110585A1Reduce weightAvoid dangerPositive displacement pump componentsOscillating piston enginesNoise generationEngineering
The invention concerns a refrigerant compressor arrangement with a compressor unit (2) supported in a case by means of springs (12) and comprising at least one bolt (26) with a bolt head (25), a holder (23) being arranged between the compressor unit (2) and at least one spring (12), the holder (23) having in its front a recess, in which the bolt head (25) engages, and which is connected to the spring (12). It is endeavoured to reduce the noise generation during operation of the refrigerant compressor arrangement. For this purpose, the bolt head (25) is arranged in the recess (24) with lateral clearance (34).
Owner:SECOP GMBH +1
Power generation apparatus and ship propelling apparatus including buoyancy body as well as web-structured wing portions provided thereto
InactiveUS20140219800A1Easy to implementReduce installation costsPropulsion based emission reductionWorking fluid for enginesElectricityWeb structure
The present invention relates to various types of power generation apparatuses and ship propelling apparatuses including a buoyancy body as well as wing portions thereto, which include wing frames with a multistage, lattice web structure foldable and rollable wings which are connected to the wing frames, wherein the power generation apparatus includes a submersible buoyancy body which has one closed end and the other open end as well as a buoyancy space formed therein, a rotary body which is rotatably connected inside the submersible buoyancy body and has a first wing portion mounted on the other end thereof, and a power generation means which is disposed between the submersible buoyancy body and the rotary body to generate electricity.
Owner:LEE SEONG WOO
Hydrogen production method, hydrogen production system, and fuel cell system
ActiveUS20100330443A1Easy to useLarge capacityElectrolysis componentsNitrogen compoundsFuel cellsNitrogen
A hydrogen production method includes: a first process in which nitrogen compounds of metal and water are reacted to produce ammonia and hydroxide of the metal; a second process in which hydrogen compounds of a metal and the ammonia produced in the first process are reacted; and a third process in which hydrogen compounds of a metal and the hydroxide of the metal produced in the first process are reacted.
Owner:TOYOTA JIDOSHA KK +1
System and method for crushing
ActiveUS20120145815A1Small amount of energyEasy to replacePlastic recyclingCocoaDistal portionEngineering
Exemplary embodiments are for a system for crushing a material that may include a compaction chamber and a screw assembly that generally extends between the proximal and distal ends of the compaction chamber. A portion of the screw assembly increases in diameter along a length of the shaft of the screw assembly such that the system is configured to crush material between the compaction chamber and the portion of the screw assembly that increases in diameter. The portion of the screw assembly that increases in diameter may be integral with the shaft of the screw assembly. An exemplary embodiment of the system may also include at least one wear member that is removably associated with the distal portion of the compaction chamber such that the wear member may assist with the crushing of material.
Owner:KOMAR IND LLC
Alloying element-saving hot rolled duplex stainless steel material, clad steel plate having duplex stainless steel as cladding material therefor, and production method for same
ActiveUS20130288074A1Low costSmall amount of energyRollsWelding/soldering/cutting articlesSS - Stainless steelChromium nitride
This alloying element-saving hot rolled duplex stainless steel material contains, by mass %, C: 0.03% or less, Si: 0.05% to 1.0%, Mn: 0.5% to 7.0%, P: 0.05% or less, S: 0.010% or less, Ni: 0.1% to 5.0%, Cr: 18.0% to 25.0%, N: 0.05% to 0.30% and Al: 0.001% to 0.05%, with a remainder being Fe and inevitable impurities, wherein the alloying element-saving hot rolled duplex stainless steel material is produced by hot rolling, a chromium nitride precipitation temperature TN is in a range of 960° C. or lower, a yield strength is 50 MPa or more higher than that of a hot rolled steel material which is subjected to a solution heat treatment, and the alloying element-saving hot rolled duplex stainless steel material is as hot rolled state, and is not subjected to a solution heat treatment. This clad steel plate includes a duplex stainless steel as a cladding material, the duplex stainless steel has the above composition, and the chromium nitride precipitation temperature TN is in a range of 800° C. to 970° C.
Owner:NIPPON STEEL STAINLESS STEEL CORP
Metal mold device for blow molding
InactiveUS7172405B2Improve transfer abilityFast coolingDomestic articlesCoatingsBlow moldingMetal device
Fluid flow grooves (11) with a flat cross section being formed between the back surface of a metal mold (2) for blow molding and a back-up member (4) which adheres tightly to this back surface. A plurality of these fluid flow grooves (11) are provided, and these fluid flow grooves are disposed densely in parallel with partition walls (21) interposed between the grooves. Fluid inlets (12) and outlets (13) are formed in the respective fluid flow grooves (11). A heating fluid or cooling fluid enters the respective fluid flow grooves (11) via the inlets (12) from a fluid supply manifold (14). The fluid flows out of the outlets (13), enters a fluid discharge manifold (15), and is discharged to the outside. Rapid heating and rapid cooling of the metal mold (2) are performed, no irregularity occurs in temperature, and the cycle time can be shortened, so that a metal mold device for blow molding in which the energy consumption is small can be obtained.
Owner:MINORU KASEI KK
Color filter ink, color filter ink set, color filter, image display device, and electronic device
InactiveUS20090135350A1High purityImprove productivityOptical filtersInksDisplay devicePhthalocyanine
A color filter ink is adapted to be used to manufacture a color filter by an inkjet method. The color filter ink includes a main pigment, a secondary pigment, a solvent and a curable resin material. The main pigment includes a halogenated phthalocyanine zinc complex. The secondary pigment includes a sulfonated pigment derivative.
Owner:SEIKO EPSON CORP
Who we serve
- R&D Engineer
- R&D Manager
- IP Professional
Why Patsnap Eureka
- Industry Leading Data Capabilities
- Powerful AI technology
- Patent DNA Extraction
Social media
Patsnap Eureka Blog
Learn More Browse by: Latest US Patents, China's latest patents, Technical Efficacy Thesaurus, Application Domain, Technology Topic, Popular Technical Reports.
© 2024 PatSnap. All rights reserved.Legal|Privacy policy|Modern Slavery Act Transparency Statement|Sitemap|About US| Contact US: help@patsnap.com