15756 results about "Single phase" patented technology

Described are controlled, time-release microparticulate active and bioactive compositions (including perfuming compositions) for targeted delivery to surfaces such as skin, hair and fabric and the environment proximate thereto, where the active and bioactive materials have a calculated log10P values of between 1 and 8 (P being the n-octanol-water partition coefficient). Such compositions include the active or bioactive material in single phase, solid solution in a wax or polymer matrix also having coated thereon and/or containing a compatible surfactant. Also described are processes and apparatus for preparing such compositions and processes for using same. Furthermore, certain component(s) of the aforementioned compositions in combination with one another are novel, and other components have novel uses in increasing fragrance substantivity, particularly in hair care preparations such as hair gels and shampoos.

A method for forming a single-phase multi-element film on a substrate in a reaction zone by PEALD repeating a single deposition cycle. The single deposition cycle includes: adsorbing a precursor on the substrate in the absence of reactant and plasma; decomposing the precursor adsorbed on the substrate by an inert gas plasma; and reacting the decomposed precursor with a reactant gas plasma in the presence of the inert gas plasma. The multi-element film contains silicon and at least two non-metal elements constituting a matrix of the film, the precursor contains silicon and optionally at least one non-metal element to be incorporated in the matrix, and the reactant gas contains at least one non-metal element to be incorporated in the matrix.

Described are controlled, time-release microparticulate active and bioactive compositions (including perfuming compositions) for targeted delivery to services such as skin, hair and fabric and the environment proximate thereto, where the active and bioactive materials have a calculated log10P values of between 1 and 8 (P being the n-octanol-water partition coefficient). Such compositions include the active or bioactive material in single phase, solid solution in a wax or polymer matrix also having coated thereon and/or containing a compatible surfactant. Also described are processes and apparatus for preparing such compositions and processes for using same. Furthermore, certain component(s) of the aforementioned compositions in combination with one another are novel, and other components have novel uses in increasing fragrance substantivity.

A single-phase multi-element film constituted by at least four elements is formed on a substrate by plasma-enhanced atomic layer deposition (PEALD) conducting one or more process cycles. Each process cycle includes: (i) forming an integrated multi-element layer constituted by at least three elements on a substrate by PEALD using at least one precursor; and (ii) treating a surface of the integrated multi-element layer with a reactive oxygen, nitrogen, and/or carbon in the absence of a precursor for film formation so as to incorporate at least one new additional element selected from oxygen, nitrogen, and carbon into the integrated multi-element layer.

Methods for forming compositions comprising a single-phase rare-earth dielectric disposed on a substrate are disclosed. In some embodiments, the method forms a semiconductor-on-insulator structure. Compositions and structures that are formed via the method provide the basis for forming high-performance devices and circuits.

The electrode material for a lithium secondary battery according to the present invention includes particles of a solid state alloy having silicon as a main component, wherein the particles of the solid state alloy have a microcrystal or amorphous material including an element other than silicon, dispersed in microcrystalline silicon or amorphized silicon. The solid state alloy preferably contains a pure metal or a solid solution. The composition of the alloy preferably has an element composition in which the alloy is completely mixed in a melted liquid state, whereby the alloy has a single phase in a melted liquid state without presence of two or more phases. The element composition can be determined by the kind of elements constituting the alloy and an atomic ratio of the elements.

A power converter for converting energy from a green power unit as e.g. a solar cell into energy fed into the commercial grid is described. The object is to provide a versatile modularized power converter with eased access to control of the power switches. Another object is to improve the electrical efficiency. This is achieved by using an independent controller on a DC/DC module and an independent controller on a DC/AC module, whereby the the two independent controllers communicate with each other and the outside world by means of a communication bus. Further, the DC/DC module of the power converter comprises a transformer which transfers energy from the DC/DC module to the DC/AC module. This design enables independent control of the modules and eases controllability of the power switches in order to suppress retroaction from pulsations generated on the mains when supplying energy to a single phase grid. Hereby the electrical efficiency of the power converter is increased. Also, an active snubber circuit is described which further increase the efficiency.

A soft-switched single-phase quasi-single-stage (QSS) bi-directional inverter/charger converts AC-DC or DC-AC. The inverter/charger comprises a push-pull inverter/rectifier on the dc-side, an isolation transformer which provides ohmic isolation and voltage scaling, two full-bridges on the ac side in cascade, a voltage clamp branch comprising a capacitive energy storage element in series with an active switch with its anti-parallel diode, a passive filter at the ac side to smooth out the high frequency switching voltage ripple at the output, and a corresponding PWM scheme to seamlessly control the converter to operate in all four quadrant operation modes in the output voltage and output current plane, and is capable of converting power in both directions.

This invention improves the performance and lowers the cost of DC to AC inverters and the systems where these inverters are used. The performance enhancements are most valuable in renewable and distributed energy applications where high power conversion efficiencies are critical. The invention allows a variety of DC sources to provide power thru the inverter to the utility grid or directly to loads without a transformer and at very high power conversion efficiencies. The enabling technology is a novel boost converter stage that regulates the voltage for a following DC to AC converter stage and uses a single semiconductor switching device. The AC inverter output configuration is either single-phase or three-phase.

A galvanic isolated DC-DC and DC-AC power conversion system is coupled to a plurality of DC sources which are derived from a combination of a plurality of single-phase and three-phase AC-DC converters. The DC-DC and DC-AC power conversion system in one embodiment is configured to provide mixed type outputs (mixed frequency, e.g. DC with 50 or 60 Hz, with 400 Hz; mixed voltage levels).

A new current loop control system method is proposed for a single-phase grid-tie power conditioning system that can be used under a standalone or a grid-tie mode. This type of inverter utilizes an inductor-capacitor-inductor (LCL) filter as the interface in between inverter and the utility grid. The first set of inductor-capacitor (LC) can be used in the standalone mode, and the complete LCL can be used for the grid-tie mode. A new admittance compensation technique is proposed for the controller design to avoid low stability margin while maintaining sufficient gain at the fundamental frequency. The proposed current loop controller system and admittance compensation technique have been simulated and tested. Simulation results indicate that without the admittance path compensation, the current loop controller output duty cycle is largely offset by an undesired admittance path. At the initial simulation cycle, the power flow may be erratically fed back to the inverter causing catastrophic failure. With admittance path compensation, the output power shows a steady-state offset that matches the design value. Experimental results show that the inverter is capable of both a standalone and a grid-tie connection mode using the LCL filter configuration.

An uninterruptible power supply (UPS) system includes an AC power input configured to receive AC power from a single-phase AC power source or a multi-phase AC power source, a DC power source, an output circuit including a power output, a controllable switch configured to selectively couple at least one of the AC power input and the DC power source to the output circuit, and a processor coupled and configured to affect operation of the output circuit depending upon which of single-phase and multi- phase operation of the UPS is indicated.

A multi-port reconfigurable battery has at least one bank of statically joined series connected battery cells, each including a positive and negative pole connected through switches to respective output connections on at least one port. Processor controlled switches reconfigure the cells to provide power for electrical loads on one or more ports and simultaneously provide charging on one or more other ports. An alternative configuration divides groups of series connected cells into separate battery banks that permit other configurations. Ports are configurable to share one electrically common connection with other ports providing a simplified configuration (multi-tap reconfigurable battery). Applications include selectable motor speed control and battery regeneration schemes matched to motor output, and single or multiphase AC power output at selectable frequencies for use as an Uninterruptible Power Supply. The battery is also described as a power source for a forced-air induction system (e.g. electric supercharger) for a combustion engine.

PCT No. PCT/SE95/01560 Sec. 371 Date Mar. 20, 1996 Sec. 102(e) Date Mar. 20, 1996 PCT Filed Dec. 20, 1995 PCT Pub. No. WO96/19199 PCT Pub. Date Jun. 27, 1996A proliposome powder, said powder comprising in a single phase discrete particles of a biologically active component together with a lipid or mixture of lipids having a phase transition temperature of below 37 DEG C. and a process for the manufacture of a proliposome powder for inhalation.

A topical spray or foam, methods of making the formulation, and methods of use thereof, has been developed. In one preferred embodiment, the composition includes one or more active agents and exhibits both antibacterial activity and antifungal activity. Excipients such as chemical disinfectants, anti-pruritic agents to minimize itching, and skin protective compounds may be added. The composition may be formulated to be dispensed as a spray or foam and the spray or foam may be administered either by a hand pump or by an aerosolizing propellant. A second single phase formulation has also been developed. The formulation comprises a first drug which is water soluble or hydrophilic and a second drug which is lipid soluble or hydrophobic, wherein at least one of the drugs is bound to an ion-exchange resin. The use of binding resins, such as ion-exchange resins, allows drugs with incompatible solvent requirements to be prepared in a single-phase formulation.

A photovoltaic module-mounted AC inverter circuit uses one or more integrated circuits, several power transistors configured as switches, several solid-dielectric capacitors for filtering and energy storage, several inductors for power conversion and ancillary components to support the above elements in operation. The integrated circuit includes all monitoring, control and communications circuitry needed to operate the inverter. The integrated circuit controls the activity of pulse-width modulated power handling transistors in both an input boost converter and a single-phase or multi-phase output buck converter. The integrated circuit also monitors all power processing voltages and currents of the inverter and can take appropriate action to limit power dissipation in the inverter, maximize the available power from the associated PV module and shut down the inverter output if the grid conditions so warrant. The integrated circuit implements power line communications by monitoring the AC wiring for signals and generating communications signals via the same pulse-width modulation system used to generate the AC power. Communications is used to report inverter and PV module status information, local identification code and to allow for remote control of inverter operation.

This invention relates to stable non-aqueous single phase viscous vehicles and to formulations utilizing such vehicles. The formulations comprise at least one beneficial agent uniformly suspended in the vehicle. The formulation is capable of being stored at temperatures ranging from cold to body temperature for long periods of time. The formulations are capable of being uniformly delivered from drug delivery systems at an exit shear rate of between about 1 to 1×10⁻⁷ reciprocal second.

Injection molding systems and methods useful for making microcellular foamed materials are provided as well as microcellular articles. Pressure drop rate and shear rate are important features in some embodiments, and the invention provides systems for controlling these parameters in an injection molding system. Another aspect involves an injection molding system including a nucleator that is upstream of a pressurized mold. Another aspect involves an extrusion system with the reciprocating screw for forming a single phase solution of non-nucleated blowing agent and polymeric material. Another aspect involves very thin walled microcellular material and very thin walled polymeric material. Another aspect provides a method for producing high weight reductions in very thin-walled parts with surfaces that have no noticeable differences from non-foamed parts.

A system and method for determining the relative phase of each of a plurality of load meters connected to a three-phase power distribution system. The system includes a gateway that communicates information to and from each of the individual load meters. The gateway generates a timing pulse that is received by each of the load meters. Based upon the delay from the receipt of the timing pulse to the next zero crossing of the single phase power supply received by the meter, the utility can determine the phase of the individual meter. The system can include a feeder meter connected to each phase of the electrical supply system to determine the energy consumption for each of the meters connected to a specific phase. The utility can compare the energy consumption information from the feeder meter to all of the load meters connected to the same phase to determine whether any energy theft is occurring.

A battery-operated transcutaneous electrical nerve stimulator (TENS) to treat headache pain in an abortive and/or preventive manner. The TENS unit and its electrodes are built into a unitary device which facilitates a self-administered treatment. In some embodiments, the pulses are monophasic. In other embodiments, pairs of biphasic pulses are provided, wherein each pair of biphasic pulses includes a first pulse having a first polarity separated by a gap in time from a second pulsed having an opposite polarity. In some embodiments, each pulse in each biphasic pair is of a duration equal to that of the other pulse of the pair. In some embodiments, the duration of each pulse is between about 50 microseconds and about 400 microseconds, and the gap in time between pulses of a pair is between about 50 and 100 microseconds.