267 results about "Radiation level" patented technology

A safety indicator monitors environment conditions detrimental to humans e.g., hazardous gases, air pollutants, low oxygen, radiation levels of EMF or RF and microwave, temperature, humidity and air pressure retaining a three month history to upload to a PC via infra red data interface or phone link. Contaminants are analyzed and compared to stored profiles to determine its classification and notify user of an adversity by stored voice messages from, via alarm tones and associated flashing LED, via vibrator for silent operation or via LCD. Environmental radiation sources are monitored and auto-scaled. Instantaneous radiation exposure level and exposure duration data are stored for later readout as a detector and dosimeter. Scans for EMF allow detection with auto scaling of radiation levels and exposure durations are stored for subsequent readout. Electronic bugs can be found with a high sensitivity EMF range setting. Ambient temperature measurements or humidity and barometric pressure can be made over time to predict weather changes. A PCS RF link provides wireless remote communications in a first responder military use by upload of alarm conditions, field measurements and with download of command instructions. The link supports reception of telemetry data for real time remote monitoring of personnel via the wrist band for blood pressure, temperature, pulse rate and blood oxygen levels are transmitted. Commercial uses include remote environmental data collection and employee assignment tasking. GPS locates personnel and reporting coordinates associated with alarm occurrences and associated environmental measurements.

A safety indicator monitors environment conditions detrimental to humans e.g., hazardous gases, air pollutants, low oxygen, radiation levels of EMF or RF and microwave, temperature, humidity and air pressure retaining a three month history to upload to a PC via infra red data interface or phone link. Contaminants are analyzed and compared to stored profiles to determine its classification and notify user of an adversity by stored voice messages from, via alarm tones and associated flashing LED, via vibrator for silent operation or via LCD. Environmental radiation sources are monitored and auto-scaled. Instantaneous radiation exposure level and exposure duration data are stored for later readout as a detector and dosimeter. Scans for EMF allow detection with auto scaling of radiation levels and exposure durations are stored for subsequent readout. Electronic bugs can be found with a high sensitivity EMF range setting. Ambient temperature measurements or humidity and barometric pressure can be made over time to predict weather changes. A PCS RF link provides wireless remote communications in a first responder military use by upload of alarm conditions, field measurements and with download of command instructions. The link supports reception of telemetry data for real time remote monitoring of personnel via the wrist band for blood pressure, temperature, pulse rate and blood oxygen levels are transmitted. Commercial uses include remote environmental data collection and employee assignment tasking. GPS locates personnel and reporting coordinates associated with alarm occurrences and associated environmental measurements.

A dual-energy x-ray imaging system searches a moving automobile for concealed objects. Dual energy operation is achieved by operating an x-ray source at a constant potential of 100 KV to 150 KV, and alternately switching between two beam filters. The first filter is an atomic element having a high k-edge energy, such as platinum, gold, mercury, thallium, lead, bismuth, and thorium, thereby providing a low-energy spectrum. The second filter provides a high-energy spectrum through beam hardening. The low and high energy beams passing through the automobile are received by an x-ray detector. These detected signals are processed by a digital computer to create a steel suppressed image through logarithmic subtraction. The intensity of the x-ray beam is adjusted as the reciprocal of the measured automobile speed, thereby achieving a consistent radiation level regardless of the automobile motion. Accordingly, this invention provides images of organic objects concealed within moving automobiles without the detritus effects of overlying steel and automobile movement.

A dual-energy x-ray imaging system searches a moving automobile for concealed objects. Dual energy operation is achieved by operating an x-ray source at a constant potential of 100 KV to 150 KV, and alternately switching between two beam filters. The first filter is an atomic element having a high k-edge energy, such as platinum, gold, mercury, thallium, lead, bismuth, and thorium, thereby providing a low-energy spectrum. The second filter provides a high-energy spectrum through beam hardening. The low and high energy beams passing through the automobile are received by an x-ray detector. These detected signals are processed by a digital computer to create a steel suppressed image through logarithmic subtraction. The intensity of the x-ray beam is adjusted as the reciprocal of the measured automobile speed, thereby achieving a consistent radiation level regardless of the automobile motion. Accordingly, this invention provides images of organic objects concealed within moving automobiles without the detritus effects of overlying steel and automobile movement.

A nuclear radiation detector included inside mobile personal communication devices (e.g. cellular or satellite phone, pager, PDA) allows for a network of portable radiation detectors that can not only detect radiation, but also track possible radiation sources by virtue of the ubiquitous nature of such personal communication devices. When radiation levels above a certain level are detected, the detector electronics embedded within any proximate mobile personal communication device communicates with the device to cause transmission of relevant data to the authorities (e.g., central reporting server monitored by FBI). The detection event is assessed by factors including, for example, quantity of alarms in a given area and radiation level detected. The small size of this embedded detector allow for its discreet configuration and monitoring at all times. The device is non-invasive and requires no user knowledge or action, thus eliminating indiscriminate and uncontrolled action by the user.

An x-ray inspection system for identifying fissile material includes one or more sources of penetrating radiation that generate first, second, and third instantaneous spectra where the object is exposed to the second only if there is no penetration of the first and the object is exposed to the third only if there is no penetration of the second. Further, the sources of the second and the third spectra are pulsed. Consequently, ambient levels of radiation may be held below cabinet levels while identifying objects containing fissile material.

In a dosimeter for measuring levels of ionizing radiation, for example during radiotherapy, a plurality of radiation sensors, such as insulated gate field effect transistors (IGFETs), are spaced apart at predetermined intervals on a support, for example a flexible printed circuit strip, and connected to a connector which can be coupled to a reader for reading the sensors. The sensors may each be connected to a reference device, which may also be an insulated gate field effect transistor, and the absorbed radiation dose may be determined by measuring, before and after the irradiation, the difference between the threshold voltages of the individual sensors and the threshold voltage reference device. Corresponding terminals of the sensors may be connected to the connector by a single conductor, thereby reducing the number of conductors required.

This invention relates to a method and apparatus for transmitting a downlink signal from a communication station to one or more subscriber units to achieve a desired radiation level over a desired sector (e.g., everywhere), the communication station including an array of antenna elements and one or more signal processors programmed (in the case of programmable signal processors) to weight the downlink signal according to one of a sequence of complex valued weight vectors. The method includes sequentially repeating transmitting the downlink signal, each repetition with a different weight vector from the sequence until all weight vectors in the sequence have been transmitted with. The sequence is designed for achieving the desired radiation level during at least one of the repetitions. In this way, every user in the desired region is transmitted to in the time period.

A self-powered integral in-core instrument thimble assembly for monitoring the temperature and radiation levels surrounding a nuclear fuel assembly, that transmits output signals wirelessly to a remote location. The in-core instrument thimble assembly is activated by a short exposure within a reactor core and remains active after the fuel assembly is removed from the reactor core to continuously provide a remote monitoring capability for the fuel assembly as it is transported or stored at a remote location, without an external power source.

In order to overcome or at least mitigate difficulties in compensating for movement of the target, for example a tumour during radiotherapy, a dosimetry apparatus and method embodying the present invention employ a dosimeter having at least one radiation detector and at least one magnetic position sensor located a predetermined distance apart. Radiation level readings from the radiation detector and position readings from the position sensor are monitored and correlated, conveniently according to time, to obtain the position of the radiation detector when a particular radiation level was detected.

Blood cells of interest are readily distinguishable from other blood cells and look-a-like particles found in a blood sample by their back-scatter signature. A preferred method for differentiating platelets in a blood sample is to irradiate the cells and particles, one at a time, with a beam of radiation, and to detect back-scattered (reflected) radiation using a plurality of optical fibers to transmit the back-scattered radiation to a high-gain photodetector, e.g. a photomultiplier tube. Preferably, the back-scatter signal so obtained is combined with a second signal representing, for example, either the level of forward-scatter within a prescribed, relatively narrow angular range, or the level of side-scattered radiation, or the level of attenuation of the cell-irradiating beam caused by the presence of the irradiated cell or particle in the beam, or the electrical impedance of the irradiated cell or particle, to differentiate the cells of interest. The method and apparatus of the invention are particularly useful in differentiating platelets and basophils in a blood sample.

A shutter-shield system for radiation protection is applied to a an x-ray generator in a shielded station for inspecting products moving through the station on a conveyor. Deployed in a sliding attachment on a collimator housing of the x-ray generator, a shutter plate is made movable by an actuator and is configured with an aperture that, in the absence of power applied to the actuator, is made to align with a fixed aperture of the collimator so as to allow emission of the x-ray beam as required for normal inspection purposes. Whenever an anomaly in the product loading on the conveyer creates a gap that could otherwise cause an increase in environmental radiation levels, powering the actuator moves the shutter plate to an offset location that offsets the apertures to an effectively closed state to initiate a standby condition wherein x-ray radiation is substantially confined to the interior region of the collimator, without having to shut down the x-ray generator itself.

An apparatus and method for in vivo and ex vivo control, detection and measurement of radiation in therapy, diagnostics, and related applications accomplished through scintillating fiber detection. One example includes scintillating fibers placed along a delivery guide such as a catheter for measuring applied radiation levels during radiotherapy treatments, sensing locations of a radiation source, or providing feedback of sensed radiation. Another option is to place the fibers into a positioning device such as a balloon, or otherwise in the field of the radiation delivery. The scintillating fibers provide light output levels correlating to the levels of radiation striking the fibers and comparative measurement between fibers can be used for more extensive dose mapping. Adjustments to a radiation treatment may be made as needed based on actual and measured applied dosages as determined by the fiber detectors. Characteristics of a radiation source may also be measured using scintillating materials.

A mobile handset configured to estimate the radiation absorbed per mass of tissue of a user, and to perform an action in case the absorbed radiation exceeds a predefined threshold. The absorbed radiation may be estimated during a call. Additionally or alternatively, a prediction of the absorbed radiation level may be estimated and given to the user while the handset is not engaged in a call. various data items such as received power per time, estimated absorbed radiation and location may be transmitted to a server. A server application may use these data items to create regional maps of a cellular network coverage and quality by accumulating multiple inputs from a plurality of individual mobile handsets.

The invention publishes a wave guide array antennas manufacture method of high gain crewel polarized or the double circular polarized, which relates to a wave guide array antennas manufacture technique in the correspondence broadcast and measure-control domain. The invention has designed the radiation level, the horizontal polarization or the circular polarization feed wave guide level, the perpendicular polarization feed wave guide level, the perpendicular polarization feed wave guide lap, the feed way of using the square or the circular waveguide resonant cavity, has solved the receive and launch of the double polarized electromagnetism signal; The horizontal polarization uses the coupling feed way and the perpendicular polarization uses the direct feed way, completes the separation of the two polarized components, simultaneously may realizes the double circular polarized work. The invention has the double polarized radiation, the high feed efficiency, compact structure, low processing cost and so on merits, is specially suitable for the manufacture of each kind of satellite communication or single control station antenna which works in the double thread polarization or double circular polarized application situations.

A radioactive material detection system includes a plurality of radioactive material detection apparatuses and a master unit / master module. Each apparatus is disposed in or on a cargo receptacle and each apparatus has a wireless transmitter, a radiation sensor and a detection controller. The master unit / master module has a receiver configured to receive the wirelessly transmitted information from each of the wireless transmitters and a master controller. The system detects fissile or nuclear material that emits radiation by (i) calculating and storing at the master unit / master module an initial average measured radiation level at each radioactive material detection apparatus location throughout the entire array of radioactive material detection apparatuses and (ii) comparing the current measured radiation at each radioactive material detection apparatus location to the initial radiation level at each location in order to identify an anomaly amongst the plurality of cargo receptacles.

A radiation therapy system and method, especially for brachytherapy, monitors and verifies dose delivered at a plurality of points at or near the region to be irradiated, integrating verification with radiation delivery. In one procedure, mapping is used to determine the shape and location of the region to be irradiated. A treatment plan is developed using the mapping information and a dose prescription. As radiation is delivered to the target region internally, preferably using an electronic radiation source, the dose received at plural points is monitored and continually fed to a central processor. As needed based on feedback, the system modifies the treatment plan and delivery of radiation accordingly, to arrive substantially at the prescribed dose at all locations in the region. In a modified procedure the treatment is done according to a prescription dose but without a treatment plan by multiple iterations of source pullback and feedback and analysis of dose received in the tissue. Source radiation levels and / or pattern and dwell are modified for each successive iteration and preferably for different dwell points in an iteration.

The invention relates to a method for realizing fusion and enhancement of a remote sensing image, which comprises the following steps: registering a selected multi-spectral remote sensing image to a panchromatic image; carrying out LBV data transformation on wave bands of the multi-spectral remote sensing image to obtain processed L, B and V images; using the processed L, B and V images as three components, using the L representing the general radiation level as an I component and a V component, and selecting to carry out fusion based on IHS transformation, fusion based on IHS transformation combined with wavelet transformation and fusion based on HSV transformation combined with wavelet transformation; visually inspecting whether the final fusion result of the image is satisfactory; and evaluating the resultant image according to multiple evaluation criteria. By adopting the LBV data transformation method based on data transformation of multiple spectral wave bands, the method provided by the invention ensures that spectral information of the image is more abundant and breaks through the limitation that a high-resolution image is fused with only three spectral wave bands in the traditional image fusion method, thereby being a major breakthrough of the traditional fusion method.

A process for decontamination by radiation of a product. The process comprises at least one exposing step during which at least a first part of the product is exposed to a first radiation level, and at least a second part of the product is exposed to a second radiation level. The invention also relates to an equipment suitable for such a process.

Disclosed herein is a method for protecting humans in need of such protection from physical damage caused by ionizing radiation comprising administering to said humans on a defined basis prior to and after exposure to such radiation a plurality of antioxidants at a dosage level directly proportional to the radiation level likely to be encountered.

An embodiment of the invention provides a laser annealing method, including the steps of radiating a laser beam to an amorphous film on a substrate while scanning the laser beam for the amorphous film, crystallizing the amorphous film, detecting a light quantity of laser beam reflected from the substrate and a scanning speed of the laser beam while the radiation and the scanning of the laser beam are carried out for the amorphous film, and controlling a radiation level and the scanning speed of the laser beam based on results of comparison of the light quantity of laser beam reflected from the substrate, and the scanning speed of the laser beam with respective preset references.

An X-ray device having an X-ray source, a high voltage generator supplying power to the X-ray tube and an inverter to generate, at the output end, an AC input voltage for the high voltage generator is disclosed. Provision is made therein for a resonance network to be formed between the inverter and the high voltage generator. This allows transmission of the AC input voltage with low power dissipation and low radiation levels. It also achieves spatial separation of the inverter from the high voltage generator and the X-ray source.

A method for calibrating a digital X-ray detector executed at least in part by a control logic processor. A radiation sensor is disposed along the optical path that extends between a radiation emitter and the digital X-ray detector. A set of radiation beam conditions for X-ray generation is selected and digital image values from the digital X-ray detector are obtained in one or more iterations of providing a threshold signal to radiation control logic, the threshold signal corresponding to a predetermined exposure level, exposing both the digital X-ray detector and the radiation sensor to radiation and terminating the exposure according to a comparison of the threshold signal with a signal from the radiation sensor that indicates an accumulated radiation level, then obtaining the digital image values from the digital X-ray detector. One or more sets of calibration values are generated according to the obtained digital image values.

A method and apparatus for detecting radiation in a relatively narrow wavelength band within radiation having a wide range of wavelengths. The method comprises detecting radiation in a first wavelength band including the narrow wavelength band and other wavelengths; detecting radiation in a second wavelength band which comprises substantially only the other wavelengths; and comparing the levels of detected radiation to determine the presence of radiation in the narrow wavelength band.

A radiation shield and method for reducing ambient radiation levels at a distance from a surface irradiated by penetrating radiation emanating from an instrument. The shield attaches to an end of the instrument abutting an irradiated surface and has a platen of attenuating material disposed within a plane substantially transverse to the propagation direction of penetrating radiation and substantially adjacent to the irradiated surface.

The invention relates to a multicycle random digital impulse width modulation circuit and a method thereof. The multicycle random digital impulse width modulation circuit comprises a multicycle random digital impulse width modulation module, a linear feedback shift register module and a multiplexer module; wherein, the multicycle random digital impulse width modulation module is connected with the linear feedback shift register module which is connected with the multiplexer module. The multicycle random digital impulse width modulation method is split jointed a forward-directional toothed wave and back-directional toothed wave. The technical scheme of the invention can choose one among toothed wave, pyramidal wave and random impulse width modulation according to the requirements, thereby having great flexibility. The realization of the random impulse width modulation can realize frequency spectrum spreading, thereby effectively reducing the EMI conduction and radiation level of DPWM.