1516 results about "Over the Air" patented technology

A third generation (3G) mobile communication system supports an over-the-air activation scheme utilizing a wireless packet data protocol. A subscriber identity module (SIM) is preloaded with temporary operating parameters such as a temporary international mobile subscriber identity (IMSI) that is used for initial access to a network. Once a packet data protocol communication link is established between the mobile device and a network support node, the user may remotely subscribe to a number of service terms using the mobile device. In addition, an activation procedure is carried out to assign permanent operating parameters, e.g., a permanent IMSI, to the SIM. After activation, the user can remotely modify existing terms or remotely enroll in additional service features via a wireless IP link between the mobile device and a network support node.

Methods, systems, and computer program products for over the air provisioning of soft cards on devices with wireless communications capabilities are disclosed. According to one method, a soft card provisioning application is instantiated on a device with wireless communications capabilities. A card number for a soft card desired to be provisioned on the device is obtained from a user of the device. The card number is communicated to a provisioning configuration server over an air interface. Card-issuer-specific challenges corresponding to the card number and a provisioning issuer server network address are obtained from the provisioning configuration server. The challenges are presented to the user, and the user's responses to the challenges are received. A connection is made to the provisioning issuer server corresponding to the network address. The challenge responses are communicated to the provisioning issuer server. Soft card personalization data for activating the soft card is received from the provisioning issuer server. The soft card is provisioned for use on the device based on the personalization data.

Methods of creating a secure channel over which credit card personalization data can be transmitted over the air (OTA) are provided. In particular, Generic Authentication Architecture (GAA) may be used to establish a secure communication channel between the user equipment (UE) and a personalization application server or bureau acting as a network application function (NAF) server. An user equipment, personalization application service (e.g., a NAF server), a system embodying a personalization application server and an user equipment, and a computer program product are also provided for creating a secure channel, such as via GAA, over which credit card personalization data can be transmitted OTA.

Systems and methods for enabling the dynamic allocation of certain sub frames as downlink or uplink resources in a time division duplexed over the air communications system. A base station or eNB may allocate certain subframes within a repeating radio frame of a TDD configuration as either DL or UL subframes for communicating to user equipment or UE devices to increase efficient use of system resources based on the data to be transmitted. Methods for determining the capabilities of a selected UE and based on the determining step, dynamically allocating certain subframes are disclosed. The methods and systems are compatible with user equipment that does not support the dynamic allocation of subframes.

System(s) and method(s) for compensation of propagation delay offsets of wireless signals. Compensation is accomplished through determination of an effective wireless signal propagation delay that accounts for signal path delay and propagation delay over the air. Such determination is based at least in part on statistical analysis of accurate location estimates of reference positions throughout a coverage sector or cell, and location estimates of the reference positions generated through time-of-flight (TOF) measurements of wireless signals. Determination of propagation or signal path delay offset also is attained iteratively based at least in part on reference location estimates and TOF location estimates. High-accuracy location estimates such as those obtained through global navigation satellite systems are employed as reference location estimates. Position of probes or wireless beacons, deployed throughout a sector or cell, also are employed as reference locations. Compensation of propagation delay offset improves accuracy of conventional TOF location estimates and radio network performance.

A method and system for interfacing to an electronic device is disclosed. At least one server may be used to manage an electronic device over a wireless metropolitan area network. Accordingly, the electronic device, which may be a mobile device, may be activated over-the-air. The electronic device may be minimally provisioned to allow initiation of the activation process. As part of activation, the servers can provision the electronic device and download applications that the electronic device needs for services that a user of the electronic device subscribed to. The services can then be enabled on the electronic device.

A trusted computing environment, such as a smartcard, UICC, Java card, global platform, or the like may be used as a local host trust center and a proxy for a single-sign on (SSO) provider. This may be referred to as a local SSO provider (OP). This may be done, for example, to keep authentication traffic local and to prevent over the air communications, which may burden an operator network. To establish the OP proxy in the trusted environment, the trusted environment may bind to the SSO provider in a number of ways. For example, the SSO provider may interoperate with UICC-based UE authentication or GBA. In this way, user equipment may leverage the trusted environment in order to provide increased security and reduce over the air communications and authentication burden on the OP or operator network.

Devices, systems, and methods are disclosed which relate to provisioning a universal integrated circuit card (UICC) with multiple services. The UICC enables a wireless communication device to communicate through multiple carriers by using a unique virtual subscriber identity module (SIM) to register with each carrier. The unique virtual SIM is one of a plurality of virtual SIMs stored on and managed by the UICC. A carrier network includes a server for provisioning a new virtual SIM on a UICC over-the-air (OTA) when a new customer requests a service such as voice, data, or other type of service. These UICCs may also include logic to automatically select the best carrier for a voice call depending on the user settings.

Exemplary embodiments of system and method are provided for measuring signal amplitude, phase and / or delay offsets between multiple transmit signals fed through the transmit signal processing chains and wirelessly transmitted over the transceive antennas of separate transceiver modules, wherein transmit signal coupling between the transmit antennas of said transceiver modules' transmit signal processing chains may be used for synchronizing the transmit signals and calibrating their amplitude, phase and / or delay parameters. The exemplary embodiments further provide a front end arrangement of a wireless transceiver device which can comprise at least two independently controllable transceiver modules, each connected to an associated spatial diversity transceive antenna and comprising at least one associated transmit signal processing chain and at least one associated receive signal processing chain coupled to a common baseband processing unit. The exemplary transceiver architecture can be executed on an antenna loop between the transmit signal processing chain of a first transceiver module and the transmit signal processing chain of a second transceiver over the air interface and relies on an adaptive antenna concept which facilitates a wireless transmission of data via a plurality of wireless communication channels utilizing an array of transceive antennas, receiving feedback information via at least one of said communication channels using such antenna loop and modifying a transmission mode based on the received feedback information.

Product or service information in the form of selected wireless e-commerce content is transmitted from a server to a mobile device, such as mobile telephone or personal digital assistant. The e-commerce content is transmitted either in response to an explicit user request for communication of the e-commerce content, or, in the alternative, is “pushed” to the mobile device as permitted by a user but in the absence of a specific request. The e-commerce content received at the mobile device is presented to a user by the mobile device in textual or graphical format in conjunction with an indication of a communication needed to consummate an e-commerce transaction. If the user desires to purchase the good or service represented by the e-commerce content, the user initiates the communication indicated by the e-commerce content.

The present invention provides systems, methods, and devices adapted to notify a communications network that an application is present on a communication device by sending a feature tag that identifies the application to the communications network. The communications network can register, re-register, or de-register an application with an application server in response to receiving the feature tag. The invention provides a method by which an application can be registered in accordance with a feature tag and satisfaction of predetermined registration conditions. A further method of the invention can include updating a presence server in response to receiving a feature tag. The systems, methods and devices of the invention facilitate registration of applications in way that conservers network resources and decreases signaling traffic over the air interface.

A glasses-type terminal including a main body configured to be worn as glasses on a user's head; a first microphone configured to detect a vibration signal through a skull portion of the user in which a voice being input propagates through the skull portion of the user; a second microphone configured to detect a voice signal in which the voice being input propagates over the air; a memory configured to store a pre-registered vibration signal and a pre-registered voice signal corresponding to a pre-registered voice; and a controller configured to switch a locked state to an unlocked state when the vibration signal detected through the first microphone is matched to the pre-registered vibration signal and the voice signal detected through the second microphone is matched to the pre-registered voice signal.

Techniques for calculating the system characteristic of the adaptive filtering used for equalization and echo-suppression in a digital communications receiver, such as one used for receiving over-the-air broadcast digital television signal, are described. In these techniques, the system characteristic of the adaptive filtering is calculated from the discrete Fourier transform of successive portions of the input signal supplied to the adaptive filtering and from the discrete Fourier transform of corresponding portions of the transmitted signal, as estimated in the receiver. Receivers for implementing these techniques in various ways are also disclosed.

A method for providing a local cordless-type service comprises the steps of receiving subscriber neighborhood zone selection input so that a mobile telephone equipped subscriber may place or receive calls for a fixed rate, for example, per month without having to pay radio frequency air time charges any time they are located within their selected subscribed-to zones. If the subscribed-to zones are adjacent to one another and the mobile subscriber roams from one zone to another, the subscriber may continue their free call uninterrupted and without paying air time charges. However, when the subscriber roams outside their subscribed-to zones they may be switched from the present local cordless-type services to conventional personal communications services and pay air time charges. However for an active call, no air-time charges are incurred as the user transitions between the cellular / DPCS environment and the local cordless service environment. Associated apparatus comprises an IBS for automatically changing radio frequency channels as the subscriber roams within a subscribed-to neighborhood zone, roams to another subscribed-to zone or roams outside a subscribed-to zone. Subscribers may choose to use their mobile identification number, their current directory telephone number for wired public switched telephone service or obtain a new directory number. Subscribers can actuate their service over-the-air automatically without service personnel assistance from their home neighborhood zone.

A portable fitness device includes a global positioning system (GPS) receiver that receives GPS signals, a wireless wide-area network transmitter supporting communication over-the-air to a wireless communication network, and a processing unit coupled to the GPS receiver and the wireless wide-area network transmitter. The processing unit receives the time-stamped waypoints from the GPS receiver and determines athletic performance information and route information from the time-stamped waypoints. The processing unit further outputs at least one of the athletic performance information and the route information to the wireless communication network during a human fitness activity via the wireless wide-area network transmitter.

Systems and methods for presenting user-generated content in an easily accessible manner using an interactive media guide are provided. In particular, a user may be able to peruse user-generated content through an interactive media guide which is also used to access non-user-generated media content such as linear programming (e.g., over-the-air broadcast, cable, and satellite scheduled programming) and on-demand media. The interactive media guide may include a provider of user-generated content populated with user-generated content according to the user's interests or most recently added to the provider.

The present invention generally relates to systems and methods for performing issuer updates of data stored in a mobile device, a remote authentication, a remote payment transaction or enable the configuration of mobile application functions or operations. More specifically, the present invention relates to a method and system for securing an issuer updates processing for mobile payment application. When an update transaction is initiated, the payment application increments an Application Transaction Counter ATC and derives from this ATC a session keys. Sensitive user credential data are encrypted with the computed session keys before transmission to a gateway which is configured to compute the session keys for decryption. The decrypted user credential data are forwarded to a payment application issuer for updates.

A method for enabling secure registration of a mobile device OTA and for conducting a financial transaction at a point-of-sale (POS) has been described herein. In one embodiment, a method of mobile device registration over-the-air (OTA) comprises enabling a pre-loaded payment application having payment account information; enabling a certificate request; receiving payment credentials; associating the payment credentials with the payment account information; transmitting the payment account information and the certificate request OTA; and receiving a certificate of registration of the mobile device OTA.

Wireless networks and devices are ubiquitous today. For service providers to offer customers QoS and Service Level Agreements (SLAs) means in part providing resilient connectivity of wireless devices with good signal strength, good Signal to Noise and Interference Ratio (SNIR), and adequate useable bandwidth. Doing so requires that devices transmitting and receiving packets use over-the-air bandwidth efficiently and manage over-the-air congestion. According to embodiments of the invention QoS measurements and controls are incorporated only in the network (i.e. APs or controllers) and therefore QoS and SLAs can be achieved with all deployed client stations versus standards based approaches that require additional capabilities in network nodes, client stations and in most cases modifications to the applications. SLAs can be provided exploiting embodiments of the invention for traffic prioritization, capacity improvements through load distribution, and adjacent channel interference mitigation discretely or in combination with standards based mechanisms.

An over-the-air firmware update is accomplished in a secure manner using a two-step process. The first step uses an initial boot using a fixed boot program and an authenticated and verified secondary environment to complete starting of only authenticated code. After verifying a pending update, the second step is started with the electronic device being booted into an update mode with an update loader that has exclusive access to a signing key. A dummy update image is loaded into a temporary memory location and a hash is taken. A digital certificate is created corresponding to the update image and signed using the signing key. The update and digital certificate are atomically installed and the signing key is deactivated. Upon reboot, the new image is used for operation and is verified by the hash data and public key in the digital certificate.

An update package generation and distribution network facilitates the generation of update packages and the download of update packages to mobile devices employing pull-mode or push-mode mechanisms. The update packages may be created by a manufacturer or by the carrier employing a generation environment. Specifically, the update package generation and distribution network makes it possible to conduct over-the-air (OTA) updates to firmware and software on the mobile device by accessing update packages that are generated by the generation environment or by the manufacturer's generation environment and distributed by the update environment.

A communications system for an aircraft carrying personnel having personal electronic devices (PEDs) includes a wireless access device in the aircraft for the PEDs, and an aircraft server in the aircraft cooperating with the wireless access device for determining airborne validation of a ground server address entered via a corresponding PED. An air-to-ground transceiver in the aircraft cooperates with the aircraft server for communicating over an air-to-ground interface the airborne validated ground server address. A ground server on the ground receives the airborne validated ground server address over the air-to-ground interface, determines ground validation of the airborne validated ground server address, and provides ground access for the corresponding PED for which the entered ground server address has both airborne and ground validation.

A system and method of simultaneously conducting a data transfer and a voice call between a mobile station and a radio telecommunications network having a mobile switching center (MSC) which serves the mobile station. A first embodiment includes a landline digital simultaneous voice and data (DSVD) modem associated with the mobile station which generates DSVD source signal and line negotiation protocols. The DSVD source signal and line negotiation protocols are encapsulated into circuit mode Radio Link Protocol (RLP) signals and transmitted to the MSC. An interworking function (IWF) associated with the MSC translates the circuit mode RLP signals into signals in a landline telecommunications protocol. In another embodiment, the voice call is carried over the air interface from the mobile station to the network in one timeslot, and the data transfer is carried in at least one additional timeslot on the same voice channel. In other embodiments, two voice channels may be allocated to the same mobile station. The voice call to a first party is carried from the mobile station to the network on one voice channel, and the data transfer to the first or a second party is carried on the second voice channel. The MSC hands off the two voice channels together, but releases them individually when either the voice call or the data transfer is completed.

Methods, systems, and computer program products for over the air provisioning of soft cards on devices with wireless communications capabilities are disclosed. According to one method, a soft card provisioning application is instantiated on a device with wireless communications capabilities. A card number for a soft card desired to be provisioned on the device is obtained from a user of the device. The card number is communicated to a provisioning configuration server over an air interface. Card-issuer-specific challenges corresponding to the card number and a provisioning issuer server network address are obtained from the provisioning configuration server. The challenges are presented to the user, and the user's responses to the challenges are received. A connection is made to the provisioning issuer server corresponding to the network address. The challenge responses are communicated to the provisioning issuer server. Soft card personalization data for activating the soft card is received from the provisioning issuer server. The soft card is provisioned for use on the device based on the personalization data.

Cellular signals or other wireless signals / messages are introduced into a building or to an outside location by transmitting packets corresponding to those signals over a data network and low cost cables to designated locations within the data network. Once the designated packets containing the signals reach the destination, they are then broadcast over the air to a terminal capable of receiving the wireless message. In a first embodiment, an in-building gigabit Ethernet network, such as that currently existing presently in many buildings, is used to distribute radio signals indoors. Instead of transmitting the radio signals over the air from a repeater connected to a base station, coded baseband signals generated by the coding processor (e.g., a CDMA Modem Unit) in the base station are packetized and sent over the Ethernet network to radio processing equipment and antennas distributed throughout the building. The radio processing equipment strips the packet headers from the baseband signal packets so those signals can be broadcast via the antennas to one or more mobile terminals. Additionally, hard handoff is employable upon entering a building using specifically configured pilot signals.

A system, apparatus, and method for processing payment transactions that are conducted using a mobile device that includes a contactless element, such as an integrated circuit chip. The invention enables the updating, correction or synchronization of transaction data maintained by an Issuer with that stored on the device. This is accomplished by using a wireless (cellular) network as a data communication channel for data provided by an Issuer to the mobile device, and is particularly advantageous in circumstances in which the contactless element is not presently capable of communication with a device reader or point of sale terminal that uses a near field communications mechanism. Data transferred between the mobile device and Issuer may be encrypted and decrypted to provide additional security and protect the data from being accessed by other users or applications. If encryption keys are used for the encryption and decryption processes, they may be distributed by a key distribution server or other suitable entity to a mobile gateway which participates in the data encryption and decryption operations.

An image sensor pixel that includes a photoelectric conversion unit supported by a substrate and an insulator adjacent to the substrate. The pixel includes a cascaded light guide that is located within an opening of the insulator and extends above the insulator such that a portion of the cascaded light guide has an air interface. The air interface improves the internal reflection of the cascaded light guide. The cascaded light guide may include a self-aligned color filter having air-gaps between adjacent color filters. Air-gaps may be sealed from above by a transparent sealing film. The transparent sealing film may have a concave surface over the air-gap to diverge light that cross the concave surface into the air-gap away from the air-gap into adjacent color filters. These characteristics of the light guide eliminate the need for a microlens. Additionally, a portion of a support wall between a pair of color filters may have a larger width above than below to form a necking to hold down the color filters for better retention.