923results about How to "Minimize consumption" patented technology

A fully implantable nerve stimulation system includes an event-triggered, closed-loop control unit that detects physiological events from nerve signals and delivers stimulation pulses to a nerve to produce a desired physiological response. The stimulation system includes a low-noise, low-power nerve signal amplifier, accelerometers that detect position and a battery powered processor that selectively powers components in the system to detect physiological events and deliver stimulation pulses with a minimum of battery power.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping, “wrapped” gates, epitaxially grown conductive regions, epitaxially grown high mobility semiconductor materials (e.g. silicon-germanium, germanium, gallium arsenide, etc.), high-permittivity ridge isolation material, and narrowed base regions can be used in conjunction with the segmented channel regions to further enhance device performance.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping, “wrapped” gates, epitaxially grown conductive regions, epitaxially grown high mobility semiconductor materials (e.g. silicon-germanium, germanium, gallium arsenide, etc.), high-permittivity ridge isolation material, and narrowed base regions can be used in conjunction with the segmented channel regions to further enhance device performance.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. A multi step epitaxial process can be used to extend the ridges with different dopant types, high mobility semiconductor, and or advanced multi-layer strutures. For CMOS integrated circuits a capping layer is formed over the a first region. Epitaxial layers are formed in a second region. Then the capping layer is removed from the first region and a capping layer is formed over the second region. Epitaxial layers can than be formed in the first region.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping and “wrapped” gates can be used in conjunction with the segmented channel regions to further enhance device performance.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping, “wrapped” gates, epitaxially grown conductive regions, epitaxially grown high mobility semiconductor materials (e.g. silicon-germanium, germanium, gallium arsenide, etc.), high-permittivity ridge isolation material, and narrowed base regions can be used in conjunction with the segmented channel regions to further enhance device performance.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping, “wrapped” gates, epitaxially grown conductive regions, epitaxially grown high mobility semiconductor materials (e.g. silicon-germanium, germanium, gallium arsenide, etc.), high-permittivity ridge isolation material, and narrowed base regions can be used in conjunction with the segmented channel regions to further enhance device performance.

By forming MOSFETs on a substrate having pre-existing ridges of semiconductor material (i.e., a “corrugated substrate”), the resolution limitations associated with conventional semiconductor manufacturing processes can be overcome, and high-performance, low-power transistors can be reliably and repeatably produced. Forming a corrugated substrate prior to actual device formation allows the ridges on the corrugated substrate to be created using high precision techniques that are not ordinarily suitable for device production. MOSFETs that subsequently incorporate the high-precision ridges into their channel regions will typically exhibit much more precise and less variable performance than similar MOSFETs formed using optical lithography-based techniques that cannot provide the same degree of patterning accuracy. Additional performance enhancement techniques such as pulse-shaped doping and “wrapped” gates can be used in conjunction with the segmented channel regions to further enhance device performance.

The invention comprises a totally implantable hearing prosthesis for hearing impaired persons. An inertial vibrational element is hermetically sealed and implanted in bone between the lateral and superior semicircular canals without breaching the integrity of the canals. The vibrational element is adapted to vibrate the walls of the canals and the fluids contained therein, thereby vibrating contiguous fluids within the cochlea thus stimulating hair cells and creating a hearing percept. The invention can also be adapted to be a tinnitus masking system, and / or used in combination with a coehlear implant hearing system.

A system for operating a train having one or more locomotive consists with each locomotive consist comprising one or more locomotives, the system including a locator element to determine a location of the train, a track characterization element to provide information about a track, a sensor for measuring an operating condition of the locomotive consist, a processor operable to receive information from the locator element, the track characterizing element, and the sensor, and an algorithm embodied within the processor having access to the information to create a trip plan that optimizes performance of the locomotive consist in accordance with one or more operational criteria for the train.

The invention discloses a method and system for real-time automatic optimal dispatching of a plurality of taxicabs to passenger pick-up locations. The system uses optimization model to optimally dispatch taxicab vehicles in order to minimize total clients waiting time and to maximize taxicab business profitability. The optimization is performed based on the data on currently available taxicabs and their location, and based on the data on new clients orders and clients' pick-up locations, wherein the data on available taxicabs and their locations is obtained by the cell phone / GPS means from taxicab in-car devices and the data on clients' pick-up locations is obtained from clients cell phones / GPS-based devices.

A method, apparatus and system are disclosed for redistributing memory allocation to portions of dynamic random access memory (DRAM) and dual in-line memory module (DIMM) devices that are underutilized, in order to balance memory usage more evenly amongst active devices so as to limit the amount of power and the thermal load consumed by an individual memory component. The disclosed method, apparatus and system are capable of identifying and tracking memory usage to minimize power consumption in a way that lessens the detrimental effects of “throttling” or reduced power modes for memory devices.

A technique for combining transmission bandwidths of several mobile stations (MS1, MS2) is disclosed. A master mobile station (MS1) establishes (7-0) a WLAN base station communicating with WLAN client terminals (CT). One or more slave mobile stations (MS2) may detect a predefined network identifier and join the WLAN network. The master (MS1) assigns IP addresses for the client terminals (CT) and slave mobile stations (MS2). The master also resolves DNS queries in cooperation with external DNS servers. Traffic, including internet packets (IP1-IP4), between the client terminals and various internet hosts (HO) is tunneled over multiple simultaneous transmission paths (7-6, 7-8; 7-18, 7-22) between the master (MS1) and a multiplexing / demultiplexing computer (SM). The inventive bandwidth combination technique is transparent to the client terminals (CT) and the internet hosts (HO).

Disclosed are a display apparatus and a method of controlling the display apparatus. The display apparatus includes: a signal receiver configured to receive a broadcasting signal; a display configured to display an image based on the received broadcasting signal; a sound receiver configured to receive a sound spoken by a user; a first sound recognizer configured to be supplied with power when the display apparatus is in a standby mode, and determine whether the received sound is a reserved word candidate having a high probability of corresponding to a reserved word; a second sound recognizer configured to be supplied with power when the received sound is determined as the reserved word candidate and to determine whether the received sound is the reserved word; and a controller configured to control the preset operation to be performed when the received sound is determined as the reserved word.

The present disclosure provides a polarization multiplexed transceiver, including: a transmitter; a receiver; circuitry within the transmitter configured to insert pilot tones as a reference state of polarization for a polarization multiplexed signal; and circuitry within the receiver configured to de-multiplex the polarization multiplexed signal using the pilot tones. The transmitted signal is constructed in such a manner as to facilitate the division of the receiver processing between the analog and digital domains such that the implementation may be simultaneously both highly spectrally efficient and power efficient.

A technique for combining transmission bandwidths of several communication devices, such as mobile stations is disclosed. A master mobile station establishes a WLAN access point communicating with WLAN client terminals. One or more slave mobile stations may detect a predefined network identifier and join the WLAN network. The master assigns IP addresses for the client terminals and slave mobile stations. The master also resolves DNS queries in cooperation with external DNS servers. Traffic, including internet packets, between the client terminals and various internet hosts is tunneled over multiple simultaneous transmission paths between the master and a multiplexing / demultiplexing computer). The inventive bandwidth combination technique is transparent to the client terminals and the internet hosts.

A multi-level automation control architecture, methods, and systems are disclosed, which provide enhanced scalability, functionality, and cost effectiveness for energy, access, and control. The systems include various combinations of automation controllers, remote controllers and peripheral devices that are used to provide monitoring and control functionality over the various systems in a structure, such as HVAC, water, lighting, etc. In various embodiments, the automation controller and various peripheral devices are implemented to provide an integrated energy management system for the structure. The system allows the user to manage energy based on the day, time, the presence of people, and the availability of natural lighting and heating, as well as prioritize and participate in demand-response program. The system can be implemented using a remote controller and expanded through the addition of automation controllers, remote controllers, and peripheral devices to enable the system to be tailored to specific user requirements.

A communication system for tracking an asset globally accesses multiple communication networks and switches among them, choosing the most economic, available communication mode without need for a constant power supply. An integrated motion sensor uses a combination of GPS updating and dynamic movement calculation to obtain the most reliable position estimation. Current location is identified within a small radius at all times. While taking advantage of the GPS system to obtain accurate location information, direct exposure to GPS satellites is not required at all times. The system obtains position information from GPS satellites whenever valid GPS signals are available, and provides its own location tracking capability when GPS signals are not accessible. The position accuracy of the device is preferably within a 20-meter radius from the exact location.

A computer system. The computer system includes memory units; a power supply to supply power to the memory units; and a controller to controls the supply of power the plurality of memory units so as to intercept power supplied from the power supply to at least one of the memory units, among according to user input.

A power management unit and a corresponding method for controlling performance and power consumption of a complex low-power integrated system's processing core by automatically reducing them to a level where outstanding computational operations and software tasks can be performed just in time for further processing. A linear non-recursive adaptive filter performs a processor load prediction of the system's processing core is applied, whose filter coefficients may e.g., be calculated based on the least mean square (LMS) optimization criterion or based on any other similarity measure. In this connection, the adaptive filter may e.g., be used to predict the regularity of the clock frequency in the processing core. By using this information, the linear non-recursive adaptive filter predicts the duration of how long the processing core may lower its operating voltage to still be able to complete all its tasks in time.

Inventive embodiments are directed to components, subassemblies, systems, and / or methods for auxiliary power units (APU). In one embodiment, the APU includes a source of rotational power such as a combustion engine operably coupled to a continuously variable transmission (CVT). The CVT can be coupled to a load. In some embodiments, the load is provided by a generator. In one embodiment, the APU has a control system configured to control the operation of the engine and the operation of the CVT. The control system can facilitate substantially constant speed operation of the generator in the presence of variable operation of the engine. In another embodiment, the APU includes a continuously variable accessory drive (CVAD) operably coupled to an engine. The CVAD can include a continuously variable transmission operably coupled to a generator. In one embodiment, a skew-based control system is adapted to facilitate a change in the ratio of a CVAD.

A process for transmitting a document from a server to a mobile device on a per page basis, comprising building a graph structure within the server representing a map of the document, transmitting a page size limit from the mobile device to the server indicative of the size of a single page of the document to be displayed by the mobile device, traversing and paginating the graph structure into successive pages based on the page size limit, caching the pages within the server, and transmitting the successive pages from the server to said the mobile device for display by said the mobile device.

The invention relates to the control of servers which process client work requests in a computer system on the basis of resource consumption. Each server contains multiple server instances (also called "execution units") which execute different client work requests in parallel. A workload manager determines the total number of server containers and server instances in order to achieve the goals of the work requests. The number of server instances started in each server container depends on the resource consumption of the server instances in each container and on the resource constraints, service goals and service goal achievements of the work units to be executed. At predetermined intervals during the execution of the work units the server instances are sampled to check whether they are active or inactive. Dependent on the number of active server instances the number of server address spaces and server instances is repeatedly adjusted to achieve an improved utilization of the available virtual storage and an optimization of the system performance in the execution of the application programs.

A method of controlling fluid flow in a fluid network system by means of a plurality of fluid machines. The disclosure provides a simple empirical method of identifying network characteristics of the fluid network system used for providing the required fluid flow rate in the fluid network system utilizing minimal fluid machine power. The method includes the steps of determining a relation between a change in fluid machine speed and a corresponding change in fluid flow rate for each of the plurality of fluid machines empirically; determining a minimum total fluid machine power which provides a minimum required flow rate in the fluid network system based on a constraint involving the relation between the fluid flow rate and the corresponding fluid machine speed, and controlling a speed of the plurality of fluid machines such that the minimum total fluid machine power in the fluid network system is attained.