2781 results about "Constant power" patented technology

An electrosurgical generator which provides a constant power output particularly suited for cutting arc formation at an active electrode which exhibits a dynamic active surface area of varying geometry. Essentially constant power-based control is achieved through the utilization of a d.c. link voltage the level of which functions to establish the amplitude of the output of an RF resonant inverter. A dual loop feedback control is described wherein output power based control signals are slowly introduced at low gain, while link voltage based controls are comparatively rapidly applied. Enhanced development of a controlling d.c. link voltage is achieved through the utilization of an input network incorporating a power factor correction stage.

A medical pill intended for human or animal consumption includes an RF ID tag in or on the pill. The tag will respond to a nearby reader, the tag itself being without a battery or other constant power supply, capturing power from the reader's transmitted signal and storing a portion of that power in a power supply. An antenna for the RF ID tag may be integral with the tag or it may be transferred to the pill using conductive materials in the pill's coating, filler or binding agents, embedded within the pill, or printed onto the pill. If separate from the tag the antenna is electromagnetically coupled to the tag which has a small onboard antenna. The RF ID tag of each pill has data that are transmitted when the tag is interrogated by a signal from a reader. Incorporation of an ingestable ID tag is possible because of the tag's very small size compatible with ingestion and because the tag can contain an antenna within the pill that allows the tag to be read at a substantial distance. Several different methods for deactivating the RF ID tag after ingestion or use of the pill are disclosed. Medicaments other than oral pills can also have the ID tags.

A method and apparatus provides welding-type power and preferably includes a removable battery or other energy storage device, a converter connected to the battery, and a controller. The controller may have a CV and / or a CSC and / or an AC weld control module, and / or an ac auxiliary control module. The converter is a boost converter, a buck converter, a cuk converter, a forward converter, an inverter, a bridge converter, and / or a resonant converter. The controller may include a battery charging control module, and may have one or more charging schedules, and / or data for stored charge, thermal information, expected life of the battery, maximum amp-hour charge for the battery, maximum charging current and / or feedback. The battery charging schedules may include at least 3 phases, such as a phase of increasing voltage and a phase of decreasing current, a substantially constant power phase. The controller can wirelessly provide data to a display or pda. A generator may provide power to the battery, charger, and / or the weld. It can include a vehicle and use its dc power system.

The invention is directed to a method and a device for detecting fault current arcing in electric circuits for consumers with relatively constant power consumption, particularly in onboard aircraft power supplies. The object of the invention is to find a novel possibility for detecting arc faults in electric lines of consumers with a relatively constant power consumption which appreciably reduces erroneous triggering of safeguards without compromising the reliability of switching off in the event that arcing actually occurs. This object is met, according to the invention, in that a voltage value is measured simultaneous with the current measurement, a ratio is formed of the current measurement values and voltage measurement values that are detected in parallel, and an indicator signal is generated for detected arcing when changes in the ratio of current measurement values and voltage measurement values exceed a predetermined threshold value.

A constant voltage / constant power AC adapter converts AC voltage to DC voltage to provide power to a plurality of loads. The adapter's output characteristic is approximately a constant voltage as long as the output current draw by the loads is less than a threshold (e.g. a safety threshold for the adapter). If, however, the power draw on the adapter is such that the output current exceeds the threshold, the adapter then decreases its output voltage to maintain the power draw at a safe level. One or more loads that draw power from the adapter may be adapted to detect a drop in the AC adapter's output voltage. When such a voltage drop is detected, that information tells the load that too much current is being drawn from the adapter and that the load should throttle back (e.g., reducing battery charge current, CPU clock frequency, display brightness, etc.).

A surgical system that applies electrical energy to obtain predetermined surgical effects while improving the control of the application of the energy that is supplied by electrosurgical generators. In one embodiment, a surgical assembly interfaces with and receives power from an electrosurgical generator for executing a first electrosurgical procedure. This surgical assembly may employ a shunt circuit between its power and return lines for providing in effect a voltage limitation and / or to allow a constant power electrosurgical generator to execute an at least substantially constant voltage electrosurgical technique. The electrosurgical assembly may also include a return coupler for directing energy from the patient back to the electrosurgical generator, which in turn may include a dielectric material which interfaces with the patient and which at least initially conveys the return energy via one or more electric fields versus conduction.

A method and device for heating control of an electronic cigarette are provided, wherein, the method includes steps as below: S1. sensing whether there is a smoke signal via a sensor or a switch, if yes, executing step S2; S2. activating a timer to record time and turn on a semiconductor switch so as to heat the heating element in a full output power mode; S3. heating the heating element in a constant power mode when the recording time of the timer arrives at a first preset time T0. When implementing the present invention, the adoption of the two heating methods for heating element makes an optimized atomization effect and an excellent taste of smoking possible, which is not affected by the changeable voltage of the battery.

A communication system for tracking an asset globally accesses multiple communication networks and switches among them, choosing the most economic, available communication mode without need for a constant power supply. An integrated motion sensor uses a combination of GPS updating and dynamic movement calculation to obtain the most reliable position estimation. Current location is identified within a small radius at all times. While taking advantage of the GPS system to obtain accurate location information, direct exposure to GPS satellites is not required at all times. The system obtains position information from GPS satellites whenever valid GPS signals are available, and provides its own location tracking capability when GPS signals are not accessible. The position accuracy of the device is preferably within a 20-meter radius from the exact location.

A multiplier capable of performing signed and unsigned scalar and vector multiplication is disclosed. The multiplier is configured to receive signed or unsigned multiplier and multiplicand operands in scalar or packed vector form. An effective sign for the multiplier and multiplicand operands may be calculated and used to create and select a number of partial products according to Booth's algorithm. Once the partial products have been created and selected, they may be summed and the results may be output. The results may be signed or unsigned, and may represent vector or scalar quantities. When a vector multiplication is performed, the multiplier may be configured to generate and select partial products so as to effectively isolate the multiplication process for each pair of vector components. The multiplier may also be configured to sum the products of the vector components to form the vector dot product. The final product may be output in segments so as to require fewer bus lines. The segments may be rounded by adding a rounding constant. Rounding and normalization may be performed in two paths, one assuming an overflow will occur, the other assuming no overflow will occur. The multiplier may also be configured to perform iterative calculations to evaluate constant powers of an operand. Intermediate products that are formed may be rounded and normalized in two paths and then compressed and stored for use in the next iteration. An adjustment constant may also be added to increase the frequency of exactly rounded results.

Systems (400, 500, 600) and methods (300) for generating a chaotic amplitude modulated signal absent of cyclostationary features by preserving a constant variance. The methods involve: generating a PAM signal including pulse amplitude modulation having a periodically changing amplitude; generating a first part of a constant power envelope signal (FPCPES) by dividing the PAM signal by a square root of a magnitude of the PAM signal; generating a second part of the constant power envelope signal (SPCPES) having a magnitude equal to a square root of one minus the magnitude of the PAM signal; and generating first and second spreading sequences (FSS and SSS). The methods also involve combining the FPCPES with the FSS to generate a first product signal (FPS) and combining the SPCPES with the SSS to generate a second product signal (SPS). A constant power envelope signal is generated using the FPS and SPS.

In a method and apparatus for controlling power factor correction in mixed operation modes, a frequency of the input voltage is obtained by detecting the zero crossing points of the input voltage. A peak of the input voltage is obtained by detecting input voltage with 90 degree phase. Thus, the present invention predicts the input voltage by its frequency and peak and the characteristic of the sine wave. A digital signal processor computes the duty and frequency of a boost switch, switching the operation mode of the boost converter among continuous mode, critical mode and discontinuous mode according to input voltage or the load. According to another aspect, the operation is switched to critical mode from the average current mode when a zero current is detected before the charging and recharging cycle of the boost switch is finished. Overcurrent protection may be achieved by controlling current in response to detected voltage to provide a substantially constant power level. The overcurrent protection may be adaptive in nature.

There is provided a power control method for secondary batteries constituting, in a grid connection system supplying electric power to a power system by combining a power generator where output power fluctuates with a power storage compensator, the power storage compensator and compensating fluctuation of output power of the power generator. The method includes the steps of: dividing the secondary batteries into a “constant power control” group and a “demand responsive” group, and distributing predetermined constant input-output power out of power to be input and output provided to all the secondary batteries in order to compensate fluctuation of output power of the power generator to the “constant power control group” and the remaining input-output power to the “demand responsive” group to control input-output power of the secondary batteries respectively depending on the belonging groups.

A system for controlling the temperature of a particulate filter coupled to an exhaust outlet of an internal combustion engine includes a controller responsive to volumetric flow and temperature of exhaust gas to determine a filter regeneration parameter. In a hybrid electric-engine vehicle application, various control strategies are implemented as a function of the regeneration parameter to control exhaust gas temperature suitably for proper regeneration of the particulate filter. Such strategies include shifting the duty cycle of the engine toward lower engine speed operation along lines of constant power output, modifying the ratio of electrical power and engine power and controlling recharging of the battery supplying electrical energy to the vehicle's electric drive motor under vehicle deceleration conditions. In vehicle applications including a transmission coupled directly to the engine, shift points of the transmission are modified as a function of the regeneration parameter to control exhaust gas temperature.

The invention relates to a method of coordinating and stabilizing the delivery of wind generated power, such as to a power grid, so as to avoid sudden surges and spikes, despite wind speed fluctuations and oscillations. The method preferably uses a plurality of windmill stations, including a number of immediate use stations, energy storage stations, and hybrid stations, wherein energy can be used directly by the power grid, and stored for later use when demand is high or wind availability is low. The method contemplates forming an energy delivery schedule, to coordinate the use of direct energy and energy from storage, based on daily wind speed forecasts, which help to predict the resulting wind power availability levels for the upcoming day. The schedule preferably sets a reduced number of constant power output periods during the day, during which time energy delivery levels remain substantially constant, despite fluctuations and oscillations in wind speed and wind power availability levels.

The invention is directed to a method and a device for detecting fault current arcing in electric circuits for consumers with relatively constant power consumption, particularly in onboard aircraft power supplies. The object of the invention is to find a novel possibility for detecting arc faults in electric lines of consumers with a relatively constant power consumption which appreciably reduces erroneous triggering of safeguards without compromising the reliability of switching off in the event that arcing actually occurs. This object is met, according to the invention, in that a voltage value is measured simultaneous with the current measurement, a ratio is formed of the current measurement values and voltage measurement values that are detected in parallel, and an indicator signal is generated for detected arcing when changes in the ratio of current measurement values and voltage measurement values exceed a predetermined threshold value.

An electronic cigarette and a method for supplying a constant power therein, the electronic cigarette comprises an atomizer with a heating wire. The electronic cigarette also comprises a power supply module for supplying power to the heating wire to heat the heating wire, and further comprises a microprocessor, a detecting module connected to the microprocessor, and a voltage adjusting module. A preset constant power can supply to the heating wire of the atomizer in the electronic cigarette, so that a consistent heating power can be applied to each of the electronic cigarettes produced in batch production, and smoke amount and flavor of each of the electronic cigarettes are more consistent, thereby better meeting demands of consumers.

The invention relates to an intelligent control device of a high power energy saving electromagnetic stove, and the method thereof, The intelligent control device comprises a controllable rectifying and filtering module, a contravariant module and a microcomputer controlling module, which is characterized in that a three-phase alternating current power supply is rectified into an adjustable direct current power supply through the controllable rectifying and filtering module ; the direct current power supply is inverted into a high frequency alternating current power supply through the contravariant module, and then the electric energy is converted into electromagnetic energy to be radiated to the bottom of a cookware, and vortex flow is generated, and the cookware can be heated because of the thermal effect of the vortex flow; the microcomputer controlling module is the core of the entire system, which is used for collecting data and transmitting control information to each module; the device adopts a series of advanced control policies, such as the trigger control of the rectifier bridge of an PI regulator, the intelligent self-adaptive constant power control, the intelligent soft-start control, the intelligent cookware detection control, etc., and thereby the working stability and the security of the electromagnetic stove are enhanced. The harmonic pollution of the equipment to the electric network can be reduced to the utmost extent when the electric energy of the electromagnetic stove is saved, and the electromagnetic stove is suitable for various kitchens and dining rooms.

A constant power DC light emitting diode (LED) driving system and method is disclosed. The system comprises a plurality of LED, a DC voltage source for LED current generation, and a constant-voltage and constant-current regulator for constant luminance control. A method and a redundancy circuit thereof for LED current detouring and LED luminance maintenance are also disclosed.

The invention discloses a power control system of an excavator. The power control system is characterized by comprising a pressure sensor, a main pump displacement regulator, a revolution speed sensor and a loading calculation module, wherein the pressure sensor and the main pump displacement regulator are arranged on the outlet of a main pump, the revolution speed sensor is arranged on an engine, and the loading calculation module is arranged in the main controller; the pressure sensor, the revolution speed sensor and the main pump displacement regulator are respectively connected with the main controller and output engine revolution speed, throttle position and main pump displacement after being calculated by the loading calculation module to respectively control an actuating mechanism. The method is as follows: low load is a positive flow control mode; high load: a. when engine revolution speed is more than or equal to no-load speed* (1-7%), controlling by a constant power mode; and b. when the engine revolution speed is less than no-load speed* (1-7%), controlling by a limiting power mode. The invention controls by constant power comprehensive limiting power, gives consideration to the power output of a dynamic system on the premise of ensuring excavating force, dynamically adjusts the matching between the practical power of a hydraulic system and requirements, lowers power loss and reduces oil loss.

A straight tube LED lamp according to one aspect of the present invention includes: a first LED array including first LED elements connected in series; a second LED array that includes second LED elements connected in series, and emits light having a different emission color from an emission color of the first LED array; a FET switch provided in a path through which current flows to the second LED array; and a constant power output circuit that outputs power without changing a total value of the power, wherein the number of the first LED elements connected in series is greater than the number of the second LED elements connected in series, a total forward voltage of the first LED array is greater than a total forward voltage of the second LED array, and the first LED elements are in alignment with the second LED elements.

Generally, the invention relates to power generation and energy storage. In particular, to systems and methods for providing constant power from hydraulic inputs having widely-varying pressures. More particularly, the invention relates to hydraulic-pneumatic energy storage and recovery systems that include either a fixed or variable displacement hydraulic motor and control systems that allow a user to maintain constant power from the fixed or variable displacement hydraulic motor.

A method and apparatus for controlling a power supply to prevent instabilities due to dynamic loads in RF plasma processing systems, operating at frequencies of from 1 MHz and up 1 MHz and above. The apparatus includes a power source, a power converter receiving power from the source, the power converter providing a constant output power controlled by varying at least one of input voltage or switching frequency, and an RF generator receiving constant power from the power converter.

The invention discloses a dynamic power coordination control method for a battery energy storage system. The battery energy storage system comprises a plurality of power converters which supply power to a load and are connected in parallel for operation, and is characterized in that: the power converters connected in parallel for operation are divided into two types, and a master-slave control scheme is adopted, wherein one type comprises only one power converter which adopts a constant voltage constant frequency control mode and is called a master node, and the power converters of the other type adopt a constant power mode with a slight droop characteristic, and serve as slave nodes; generally, a power converter with a high capacity is selected to be the only one master node which is specified by an upper-layer monitoring system, and all the other power converters are the slave nodes; and under a stable state condition, active power and reactive power output by the power converters which serve as the slave nodes are set by a power instruction transmitted by the monitoring system, and the output power of the power converter which serves as the master node is dynamically regulated according to a load condition. The method adopting the master-slave control scheme has the advantages that: on the premise of sufficient power capacity, both the voltage stability and frequency stability of a micro-grid system are easily achieved, anti-load disturbance capability is high, and failure recovery time is short.