878 results about "Continuous mode" patented technology

A process is disclosed for the in situ conversion and recovery of heavy crude oils and natural bitumens from subsurface formations using either a continuous operation with one or more injection and production boreholes, which may include horizontal boreholes, or a cyclic operation whereby both injection and production occur in the same boreholes. A mixture of reducing gases, oxidizing gases, and steam are fed to downhole combustion devices located in the injection boreholes. Combustion of the reducing gas-oxidizing gas mixture is carried out to produce superheated steam and hot reducing gases for injection into the formation to convert and upgrade the heavy crude or bitumen into lighter hydrocarbons. Communication between the injection and production boreholes in the continuous operation and fluid mobility within the formation in the cyclic operation is induced by fracturing or related methods. In the continuous mode, the injected steam and reducing gases drive upgraded hydrocarbons and virgin hydrocarbons to the production boreholes for recovery. In the cyclic operation, wellhead pressure is reduced after a period of injection causing injected fluids, upgraded hydrocarbons, and virgin hydrocarbons in the vicinity of the boreholes to be produced. Injection and production are then repeated for additional cycles. In both operations, the hydrocarbons produced are collected at the surface for further processing.

A process is disclosed for the in situ conversion and recovery of heavy crude oils and natural bitumens from subsurface formations using either a continuous operation with one or more vertical injection boreholes and one or more vertical production boreholes in which multiple, uncased, horizontal boreholes may extend from the vertical boreholes, or a cyclic operation whereby both injection and production occur in the same vertical boreholes in which multiple, uncased, horizontal boreholes may extend from the vertical boreholes. A mixture of reducing gases, oxidizing gases, and steam are fed to downhole combustion devices located in the injection boreholes. Combustion of the reducing gas-oxidizing gas mixture is carried out to produce superheated steam and hot reducing gases for injection into the formation to convert and upgrade the heavy crude or bitumen into lighter hydrocarbons. Communication between the injection and production boreholes in the continuous operation and fluid mobility within the formation in the cyclic operation is induced by fracturing, multiple horizontal boreholes extending from vertical boreholes, or other related methods. In the continuous mode, the injected steam and reducing gases drive upgraded hydrocarbons and virgin hydrocarbons to the production boreholes for recovery. In the cyclic operation, wellhead pressure is reduced after a period of injection causing injected fluids, upgraded hydrocarbons, and virgin hydrocarbons in the vicinity of the boreholes to be produced. Injection and production are then repeated for additional cycles. In both operations, the hydrocarbons produced are collected at the surface for further processing.

The present invention discloses a primary-side feedback switching power supply that uses a sample-and-hold circuit to obtain a corner voltage of a harmonic wave voltage while the primary-side auxiliary winding is operating at a discontinuous mode as a feedback control, and provides both voltage regulation and current limit functions. A stable voltage output is provided within the nominal input voltage and nominal output load, such that when the output reaches a current limit, the output voltage drops but the output current is controlled to remain unchanged, so as to provide an over-current protection.

A system for managing the operation of a plurality of wireless communication mediums supported by one or more radio modules integrated within a wireless communication device. A control strategy may be employed to regulate the operation of at least one wireless communication medium operating in a continuous mode, such as an discovery or inquiry mode, so as not to conflict with other active communication occurring substantially simultaneously within the wireless communication device. The regulation may occur in the one or more radio modules, and may include rescheduling part of, or alternatively a whole, discovery hop train.

An ion mobility spectrometer comprises an ion mobility cell (10) into which molecules of a sample to be analysed are introduced. The ion mobility cell (10) is doped with ions produced by a corona discharge ionisation source (40). In one mode of operation, the corona discharge ionisation source (40) operates to produce a continual dopant stream, and in a second mode of operation, the corona discharge ionisation source (40) produces dopant ions selectively. In the non-continuous mode of operation, the ion mobility cell (10) may be doped with chemical dopant ions instead, switching between the two dopant regimes being accomplished very rapidly. The ion mobility spectrometer is particularly suitable for the detection of explosive compounds and narcotics, the ion mobility spectrum of explosives doped with ions from the corona discharge ionisation source differing from the ion mobility spectrum of such explosive compounds doped with chemical dopants.

In a power factor corrected AC-to-DC power supply system, a DC-to-DC power converter is coupled to the output of an AC-to-DC power converter in order to produce a regulated DC output signal from a rectified AC input signal. The AC-to-DC power converter and the DC-to-DC power converter each includes a switch for controlling the operation of their respective power converter. The AC-to-DC converter includes an inductor. The system provides power factor correction for minimizing harmonic distortion by including a controller that receives the regulated DC output voltage as a feedback signal, and in response, produces a series of drive pulses having predetermined constant duty cycle. These pulses are simultaneously fed to each switch, to operate the respective converters alternately between ON and OFF states. When the AC-to-DC converter is driven by a fixed duty cycle of the series of pulses, power factor correction is improved since the current flowing through the inductor is substantially proportional to the waveform of the rectified AC input signal. By preselecting the value of the inductor, the AC-to-DC converter is operable in a discontinuous mode when the instantaneous rectified AC input signal is low and in a continuous mode when the instantaneous rectified AC input signal is high.

In a method and apparatus for controlling power factor correction in mixed operation modes, a frequency of the input voltage is obtained by detecting the zero crossing points of the input voltage. A peak of the input voltage is obtained by detecting input voltage with 90 degree phase. Thus, the present invention predicts the input voltage by its frequency and peak and the characteristic of the sine wave. A digital signal processor computes the duty and frequency of a boost switch, switching the operation mode of the boost converter among continuous mode, critical mode and discontinuous mode according to input voltage or the load. According to another aspect, the operation is switched to critical mode from the average current mode when a zero current is detected before the charging and recharging cycle of the boost switch is finished.

A method for simultaneous transmission x-ray computed tomography (CT) and single photon emission tomography (SPECT) comprises the steps of: injecting a subject with a tracer compound tagged with a gamma-ray emitting nuclide; directing an x-ray source toward the subject; rotating the x-ray source around the subject; emitting x-rays during the rotating step; rotating a cadmium zinc telluride (CZT) two-sided detector on an opposite side of the subject from the source; simultaneously detecting the position and energy of each pulsed x-ray and each emitted gamma-ray captured by the CZT detector; recording data for each position and each energy of each the captured x-ray and gamma-ray; and, creating CT and SPECT images from the recorded data. The transmitted energy levels of the x-rays lower are biased lower than energy levels of the gamma-rays. The x-ray source is operated in a continuous mode. The method can be implemented at ambient temperatures.

A synchronous rectifier is switched in accordance with a primary switch transition and a reference signal representing current in a current storage device to which the synchronous rectifier is coupled. A current emulator provides a signal representing current in the current storage device as a volt-second product so that current stored in the current storage device while the primary switch is on is discharged by the synchronous rectifier. The use of a current emulator provides an inexpensive solution for controlling synchronous rectifier transitions without resorting to more expensive current sensing solutions that are commercially impracticable. Blanking intervals are provided for avoiding false transitions of the synchronous rectifier when the primary switch turns on and after the synchronous rectifier turns off. The disclosed system and method can be applied to flyback converters for a synchronous rectifier on the secondary side of a transformer, or the inductor of buck converters.

A method of displaying a plurality of pages on a screen of a terminal is provided. The method includes detecting a user's gesture that requests movement of the plurality of pages, identifying a movement mode relating to the movement of the plurality of pages, and moving and displaying a first page displayed on the screen and a second page connected to the first page displayed on the screen according to the identified movement mode, wherein the movement mode is one of a discrete mode and a continuous mode.

The present invention features a card shuffling machine having a controller that can be operated remote from the shuffling machine. A remote control unit is provided for remotely communicating operator-selected commands to the shuffling machine. The shuffling machine is capable of shuffling and dealing various games and between different modes of operation, including batch mode and continuous mode. The remote control unit includes a housing, a controller disposed therein, a display in electrical communication with the controller, and at least one user-operated key in electrical communication with the controller for electrically communicating a shuffle command to said shuffling machine allowing the dealer to select between various modes of operation, including batch mode, continuous mode, and between various games to be played.

Binary and Quadrature Feher's Modulation (F-Modulation, or FMOD) Transmitter-Receiver systems and circuits exhibit reduced envelope fluctuation and peak radiation, and increased efficiency. A subclass of these systems has a constant envelope. They advantageously provide lower power operation with improved performance including robust BER performance, and compatibility with both linearly and nonlinearly amplified narrow spectrum, and without disadvantages of conventional BPSK, DBPSK QPSK and pi / 4-QPSK. Feher's BPSK (FBPSK) is an improved efficiency transmitter which is compatible with conventional BPSK receivers. FBPSK modems are based on using quadrature structure where Q-channel data is inserted in quadrature with I-channel data for certain applications. The Q-channel data may be “offset” from the I-channel data by an amount selectable between zero and a specified time. Further improvement in the spectrum is attained using correlation between I and Q channels. FBPSK modem is shown to meet the IEEE 802.11 specified spectral direct sequence spread spectrum mask (−30 dB point) for wireless LAN, and leads to an output power gain of 6.5 dB over conventional BPSK modems. The cross-coupled quadrature FMOD structure is also suitable for continuous mode and for burst operated TDMA, FDMA, CDMA, WCDMA and CSMA Frequency Modulation Quadrature AM (QAM), QPSK and offset QPSK, as well as pi / 4-shifted QPSK modems / processors. Reduced modulation index Gaussian FSK (GFSK), multilevel FM and cross-coupled Quadrature Amplitude Modulated (QAM) transmitters and combinations of these modulations and corresponding coherent demodulators are disclosed. Controlled rise and fall time descriptions of burst operated systems are included.

A dual-mode pulse frequency modulation boost converter operates in a hysteretic mode during light load currents to regulate an output voltage using a substantially fixed peak switching current and operates in a continuous mode during heavy load currents to regulate the output voltage using a variable peak switching current. The boost converter senses load power to automatically switch between the hysteretic mode and the continuous mode.

In a method and apparatus for controlling power factor correction in mixed operation modes, a frequency of the input voltage is obtained by detecting the zero crossing points of the input voltage. A peak of the input voltage is obtained by detecting input voltage with 90 degree phase. Thus, the present invention predicts the input voltage by its frequency and peak and the characteristic of the sine wave. A digital signal processor computes the duty and frequency of a boost switch, switching the operation mode of the boost converter among continuous mode, critical mode and discontinuous mode according to input voltage or the load. According to another aspect, the operation is switched to critical mode from the average current mode when a zero current is detected before the charging and recharging cycle of the boost switch is finished. Overcurrent protection may be achieved by controlling current in response to detected voltage to provide a substantially constant power level. The overcurrent protection may be adaptive in nature.

A lower-cost and more precise control methodology of regulating the output current of a Flyback converter from the primary side is provided. The methodology regulates the output current accurately in both continuous current mode (CCM) and discontinuous mode (DCM) and can be applied to most small, medium, and high power applications such as cell phone chargers, power management in desktop computers and networking equipment, and, generally, to a wide spectrum of power management applications. Two highly integrated semiconductor chips based on this control methodology are also described that require very few components to build a constant current Flyback converter.

A dual-mode pulse frequency modulation boost converter operates in a hysteretic mode during light load currents to regulate an output voltage using a substantially fixed peak switching current and operates in a continuous mode during heavy load currents to regulate the output voltage using a variable peak switching current. The boost converter senses load power to automatically switch between the hysteretic mode and the continuous mode.

The present invention provides biocompatible, low molecular weight nanoparticulate formulations that are designed to retain and deliver therapeutics over an extended time course. The therapeutic may be conjugated or adsorbed to the periphery of the corona or conjugated to a core polymer. The nanoparticles comprise targeting ligands also conjugated or adsorbed to the periphery of the corona and / or a contrast agent in the core of the nanoparticle. As such, methods of selective targeting and / or methods of noninvasive imaging using bioluminescence and / or magnetic resonance imaging. Also provided are methods of delivering to and, optionally, imaging of a cell or tissue. Further provided are methods of producing the nanoparticles in batch or continuous mode via simple mixing or laminar flow.

The invention relates to a control method which can be applied to an active-clamp flyback miniature photovoltaic grid-connected inverter device. The active-clamp flyback miniature photovoltaic grid-connected inverter device comprises a flyback converter and a power frequency polarity conversion circuit. In the device, a current reference is used for controlling a flyback primary-side current peak value so that the device can output a half-wave sinusoidal current, and the output voltage is clamped by a grid voltage. When the instantaneous power is lower, a constant frequency current discontinuous mode in combined with a variable frequency current critical continuous mode is adopted in the flyback control method. When the flyback converter works in a variable frequency current critical discontinuous mode, an auxiliary switching tube can be conducted for a period of time when the secondary-side current of the flyback converter reaches zero, the conduction time can be accurately controlled by a digital chip, thus realizing the leakage inductance energy feedback and the soft switch of a master switching tube under the condition of wide-range output voltages and different instantaneous powers and greatly improving the efficiency under the condition of full loads.

A switching circuit operates with a first operating state and a second operating state. During the first operating state, the switching circuit allows a switching current to linearly increase. During the second operating state, the switching circuit allows the switching current to linearly decrease. A control circuit is coupled to the switching circuit for controlling the switching circuit to operate with the first operating state or the second operating state. A setting circuit generates a threshold signal for the control circuit to ensure that during the first operating state the switching current linearly increases to become higher than or equal to a current value set by the threshold signal. Thereby, the switching current is prevented from linearly decreasing to reverse polarity during the second operating state.

The invention discloses a device and a method for audio classification and audio processing. In one implementation mode, the audio processing device comprises an audio classifier for classifying audio signals to at least one audio type in real time, an audio improving device for improving the experience of audiences and an adjusting unit for adjusting at least one parameter of the audio improving device based on a confidence value of at least one audio type in a continuous mode.

A switching power supply circuit is disclosed which can achieve a high power conversion efficiency and besides achieve reduction of the circuit scale and the cost by simplification in circuit configuration. The switching power supply circuit includes a synchronous rectification circuit of the winding voltage detection system on the secondary side of a resonance converter. The coupling coefficient of an insulating converter transformer or the induced voltage level per one turn of the secondary winding is set so that the magnetic flux density of the insulating converter transformer may be lower than a fixed level thereby to maintain the secondary side rectification current in a continuous mode even in a heavy load condition. An inductor is inserted in series in a path along which rectification current is to be supplied to a secondary side smoothing capacitor so that reverse current appearing on the rectification current is suppressed by counter electromotive force generated in the inductor to further reduce the reactive power. A dc superposition characteristic of the inductor is set so that abnormal oscillation in a very light load condition (for example, 12.5 W or less) is prevented.

The ionization device of the present invention is intended for use in conjunction with an aerosol TOF MS operating in a continuous mode and is capable of ionizing particulated substances in a wide range of particle masses. In the illustrated embodiment, the ionization unit consists of three coaxial cylindrical bodies having a three aligned longitudinal slits for directing electron beams from externally located electron gun onto the axially arranged flow of droplets. The cylindrical bodies are connected to voltage sources so that the external cylindrical body functions as an anode that extracts electrons from the current-heated filament. The central cylindrical body, in combination with the aforementioned anode, serves as an electron-energy control member for precisely controlling and selecting the energy of electrons that reach the flow of particles, while the inner cylindrical body functions as a decelerating member that can be used for adjusting energy of electrons which reached the flow of particles. The heated filament of each electron gun, which is used as a source of electrons, is inclined with respect to the aforementioned longitudinal axis whereby modulation applied to the elongated outer electrode of the electron gun provides different ionization conditions for specific particles of predetermined masses for analysis of which the aerosol TOF MS is tuned.