6642results about "Electric lighting sources" patented technology

Systems and apparatuses include devices, biosensors, environmental sensors, security related sensors, networked products, communications processors and components, alert and information components, processors, and software to support: 1) facilitating medication regimen and patient / user health administration, dosage control, tracking, compliance, information inquiry and presentation, reminder and notification; 2) providing monitoring, information, ordering, and intervention; 3) presenting the option of leveraging the preventative care, alert and notification components with other components to facilitate user or occupant well being, along with living, work area and dwelling environmental or security safety; and 4) enhancing the dwelling, living or work area with products that may be networked to support the widespread acceptance of these systems and apparatuses. The systems include a) processing, centralizing and communicating device commands and / or programs, e.g. a multifunctional device controller; b) device administration; c) patient / user information; d) dwelling environmental safety; e) security breach information; f) centralized and remote apparatus and system activations through primary component or at least one backup.

Dentistry equipment includes a voice alert device adapted to annunciate a status of the dentistry equipment or a process performed by the dentistry equipment. The voice alert device in various embodiments employs synthesized and recorded human voices.

A soft start circuit generates a soft start voltage which changes over time when light emission of an EEFL is started. A pulse modulator receives a feedback voltage that corresponds to the output voltage of an inverter and the soft start voltage, and adjusts the duty ratio of a pulse signal PWM such that these two voltages match one another using a feedback operation. A striking control circuit monitors an error signal which is asserted when an abnormal state occurs. In a case in which the error signal has been asserted at a detection timing after the soft start voltage has reached a target voltage, the striking control circuit resets and restarts the soft start circuit. A driver controls the switching of the voltage at the primary coil of a transformer according to the pulse signal received from the pulse modulator.

A home automation system and method for automatic control of controlled devices throughout a home. A unique architecture of occupancy sensors includes entry / exit sensors for detecting movement through doorways that separate rooms in the home, room motion sensors for detecting room occupancy, spot sensors to detect occupancy of specific locations within the rooms, and house status sensors to detect the status of certain parameters of the home. A central controller communicates with the sensors and controlled objects over a communications network, where the sensors and controlled objects can be added to the system in a ‘plug and play’ manner. The central controller controls the controlled objects in response to the entry / exit sensors, room motion sensors, spot sensors and the house status sensors. This control is accomplished by assigning each room to one of a plurality of room occupancy states, and to one of a plurality of room modes for creating desired room atmospheres using the controlled objects, which both dictate how the controlled objects are controlled by the central controller. The room modes travel from room to room as the occupant moves throughout the home, and multiple occupants can be using different room modes as they move about the home. The controlled objects also have controlled object states, which are used by the central controller to control the controlled objects.

Methods and systems are provided for lighting systems, including high output linear lighting systems for various environments. The linear lighting systems may include power systems for driving light sources in high-voltage environments.

A white light emitting lamp is disclosed comprising a solid state ultra violet (UV) emitter that emits light in the UV wavelength spectrum. A conversion material is arranged to absorb at least some of the light emitting from the UV emitter and re-emit light at one or more different wavelengths of light. One or more complimentary solid state emitters are included that emit at different wavelengths of light than the UV emitter and the conversion material. The lamp emits a white light combination of light emitted from the complimentary emitters and from the conversion material, with the white light having high efficacy and good color rendering. Other embodiments of white light emitting lamp according to the present invention comprises a solid state laser instead of a UV emitter. A high flux white emitting lamp embodiment according to the invention comprises a large area light emitting diode (LED) that emits light at a first wavelength spectrum and includes a conversion material. A plurality of complimentary solid state emitters surround the large area LED, with each emitter emitting light in a spectrum different from the large area LED and conversion material such that the lamp emits a balanced white light. Scattering particles can be included in each of the embodiments to scatter the light from the emitters, conversion material and complimentary emitters to provide a more uniform emission.

An inductive power supply system for providing power to one or more inductively powered devices. The system includes a mechanism for varying the physical distance or the respective orientation between the primary coil and secondary coil to control the amount of power supplied to the inductively powered device. In another aspect, the present invention is directed to an inductive power supply system having a primary coil and a receptacle disposed within the magnetic field generated by the primary coil. One or more inductively powered devices are placed randomly within the receptacle to receive power inductively from the primary coil. The power supply circuit includes circuitry for adjusting the power supplied to the primary coil to optimize operation based on the position and cumulative characteristics of the inductively powered device(s) disposed within the receptacle.

An inductive power supply system for providing power to one or more inductively powered devices. The system includes a mechanism for varying the physical distance or the respective orientation between the primary coil and secondary coil to control the amount of power supplied to the inductively powered device. In another aspect, the present invention is directed to an inductive power supply system having a primary coil and a receptacle disposed within the magnetic field generated by the primary coil. One or more inductively powered devices are placed randomly within the receptacle to receive power inductively from the primary coil. The power supply circuit includes circuitry for adjusting the power supplied to the primary coil to optimize operation based on the position and cumulative characteristics of the inductively powered device(s) disposed within the receptacle.

Systems and methods for controlling a climate control system of a smart-home environment that includes a plurality of smart devices are provided. One method includes detecting, with a hazard detector of the smart devices, a level of carbon monoxide (CO) at the hazard detector that exceeds a threshold CO level at a location of the hazard detector, determining, by one of the smart devices, that the climate control system includes a combustion based heat source, and in response to the detecting and the determination, transmitting, by a system controller of the climate control system, a first signal to turn off at least one aspect of the climate control system.

A lamp assembly configured to inductively receive power from a primary coil. The lamp assembly includes a lamp circuit including a secondary and a lamp connected in series. In a first aspect, the lamp circuit includes a capacitor connected in series with the lamp and the secondary to tune the circuit to resonance. The capacitor is preferably selected to have a reactance that is substantially equal to or slightly less than the reactance of the secondary and the impedance of the lamp. In a second aspect, the lamp assembly includes a sealed transparent sleeve that entirely encloses the lamp circuit so that the transparent sleeve is fully closed and unpenetrated. The transparent sleeve is preferably the lamp sleeve itself, with the secondary, capacitor and any desired starter mechanism disposed within its interior.

A high-intensity light source is formed by a micro array of a semiconductor light source such as a LEDs, laser diodes, or VCSEL placed densely on a liquid or gas cooled thermally conductive substrate. The semiconductor devices are typically attached by a joining process to electrically conductive patterns on the substrate, and driven by a microprocessor controlled power supply. An optic element is placed over the micro array to achieve improved directionality, intensity, and / or spectral purity of the output beam. The light module may be used for such processes as, for example, fluorescence, inspection and measurement, photopolymerzation, ionization, sterilization, debris removal, and other photochemical processes.

A wireless power transmission system comprises: a power transmitter, which includes a power amplifier that provides a sinusoidal waveform in the frequency range of about 20 to 500 kHz; a first loop antenna producing an alternating magnetic field within a selected area; a power receiver, which includes a second loop antenna located at least partially within the alternating magnetic field of the first antenna; and an electricity-consuming device connected to the output of the power receiver. Both transmitter and receiver preferably contain a capacitive circuit element to optimize tuning, which may be discrete capacitors or may rely on the self capacitance of the antenna(s). Applications of the system include: wirelessly powered lights for fans, boats, aquariums, display cases, etc.; wirelessly powered sensors and other devices for use with captive animals; and systems for transmitting useful power through construction materials to devices on the other side of walls or other structures.

A system for automatic regulation of daylight admitted by a window in the presence of artificial illumination produced by a high-efficiency (e.g., fluorescent-type) electric lamp. A preferred embodiment, adaptive window covering system 10, consists of an illuminance sensor 11, a conventional control apparatus 12, and a conventional shading means 13. System 10 is used in conjunction with a conventional, high-efficiency, electric lamp 14 and a conventional window 18, in a room 19. Sensor 11 produces a signal dependent on power contained in a portion of the daylight spectrum, but substantially insensitive to power contained in the spectrum of artificial illumination produced by lamp 14. In a preferred embodiment, sensor 11 includes a silicon photodiode and optical low-pass filter to provide a spectral response which extends from approximately 800 to 1200 nanometers, which falls outside the spectrum produced by typical fluorescent lamps (e.g, 300 to 750 nanometers). Sensor 11 is oriented to sample the ambient illumination in room 19, which includes both daylight and artificial components. Control apparatus 12 produces an actuating signal dependent on the output of sensor 11. Shading means 13 varies the amount of daylight admitted by window 18 as a function of the actuating signal produced by control apparatus 12. Thus, system 10 varies the amount of daylight admitted by window 18 as a function of the power contained in a portion of the daylight spectrum, but independent of the power contained in the spectrum produced by lamp 14.

One or more outdoor lights may operate independently with sensing and control processes mainly on-pole, or may communicate as a networked array of poles, wherein a master / coordinating pole / node transmits signals from the networked array to a control station, and receive signals from the control station for the networked array, via call phone and / or satellite. Independent poles and / or the networked array of poles may be adapted for energy-saving processes; cooperation with the grid; renewable power production and storage by means of solar panels and associated batteries; and / or to provide Wi-Fi hot-spots, public safety alarms, information or data-analysis to the public or customers. An energy-saving active control system controls charging of the batteries and distribution of energy from the solar panel and / or the batteries, so that the batteries remain undamaged, and the light(s) remain operation even during the winter or other long periods of clouds and diffuse light. The active control of energy distribution by a load controller function may include dimming during the night, except when sensors detect motion, and, in extreme cloudy or diffuse-light periods, increasing increments of dimming and / or load shedding, to preserve the batteries and operability.

Illumination systems, devices, and methods for cultivating biomasses. A bioreactor system is operable for growing photosynthetic organisms. The bioreactor system includes a bioreactor and an illumination system. The illumination system includes one more optical waveguides configured to light at least some of a plurality of photosynthetic organisms retained in the bioreactor. In some embodiments, the one or more optical waveguides include a plurality of structures configured to direct light energy from a solar energy collector, and a plurality of artificial light sources, along the interior of the waveguide. In some embodiments, the one more optical waveguides include a plurality of light-diffusing structures configured to guide at least a portion of the light from the solar energy collector and a plurality of artificial light sources directed along the interior of the waveguide, to the exterior of the waveguide.

The present invention introduces a new class of lightweight tile-based illumination systems for uses wherein thin directionally-illuminating light distributing engines are embedded into the body of otherwise standard building materials like conventional ceiling tiles along with associated means of electrical control and electrical power interconnection. As a new class of composite light emitting ceiling materials, the present invention enables a lighter weight more flexibly distributed overhead lighting system alternatives for commercial office buildings and residential housing without changing the existing materials. One or more spot lighting, task lighting, flood lighting and wall washing elements having cross-sectional thickness matched to that of the building material or tile into which they are embedded, are contained and interconnected within the material body's cross-section. Embedded power control devices interconnected to each lighting element in the distributed system communicate with a central switching center that thereby controls each light-emitting element in the system.

An apparatus for producing light includes a chamber and an ignition source that ionizes a gas within the chamber. The apparatus also includes at least one laser that provides energy to the ionized gas within the chamber to produce a high brightness light. The laser can provide a substantially continuous amount of energy to the ionized gas to generate a substantially continuous high brightness light.

An outdoor light system comprising a plurality light elements linked to a central controller. Each light element include a translucent shell, plurality of LEDs positioned so as to emit a light show through the shell A compartment for receiving and securing a replaceable volatile active cartridge and a heater for enabling the device to effectively emit an active ingredient from the cartridge when the cartridge is secured in the compartment. A white light source may be provided in each device as a source of illumination along with the LEDs The devices can be used as white light sources, for displaying a coordinated colored light shows, for displaying colored light schemes and for volatile active emission. The devices of disclosed the system may include an acoustic transducer for producing light and sound shows. The device may also include a light sensor, a motion detector and / or a microphone or acoustic receiver thereby enabling the light and sound shows to be dependent upon ambient light intensity, motion detection and / or ambient noise. The devices and systems are suitable for outdoor home lighting, porch and deck lighting and path / driveway lighting.

The present invention is an improvement of methods and systems using mobile and distributed data stream mining algorithms for mining continuously generated data from different components of a vehicle. The system is designed for both on-board and remote mining and management of the data in order to (1) detect the effect of various engine parameters on fuel consumption behavior, (2) predictive classification of driving patterns and associative indexing of driver performance matrix, (3) resource-constrained anomaly detection for onboard health monitoring, (4) vehicle-to-vehicle social networking and distributed data mining, (5) adaptive placement of advertisements based on vehicle performance profile and (6) onboard emissions analytics computation for wireless emissions monitoring and smog test.

A battery-powered remote control for radiating wireless signals to control a controlled device has a night light that glows whereby it is visible in a darkened room and the battery lasts at least about three years. It also includes a wireless transmitter, a controller, a battery and a control element. The control element generates a signal when activated to cause the controller to operate the wireless transmitter to transmit a wireless signal to control the controlled device. The night light comprises a light emitting diode and a light pipe having a textured front surface. A power supply circuit for the LED provides an LED current from the battery. The LED has a normal operating current range and the LED current is several orders of magnitude below the normal operating current range.

A device for use in locating a fault on a power line of a power distribution system includes: at least one sensor for measuring at least one property of the power line, and at least one output device in operative connection with the sensor to signal a state of the power line. The signaled state of the power line is determined from the measured property and indicates whether a fault has occurred in the power line. The output device can, for example, signal a current state or a previous state of the power line. The device can further include a controller in operative connection with the output device to control the operation of the output device based upon at least one of the current state or the past state of the power line. A device for use in measuring a property of power line of a power distribution system includes: a connector adapted to place the device in operative connection with the power line in the power distribution system without taking the power line out of operation; a sensor for measuring a property of the power line, and an output device in operative connection with the sensor to transmit a signal representative of the measured property.

The invention provides systems and methods for providing illumination. A lighting unit may have a support structure, and one or more light emitting elements supported by a circuit board contacting the support structure. A first optical element and a second optical element may be provided. A remote luminescent material may be provided on one or more optical elements. Light emitting elements configured to excite the luminescent material such as highly efficient light emitting diodes may be directed towards the luminescent material. The support structure may be a heat dissipating element, which may conduct heat from a heat source to a surface of the support structure. The heat dissipating element may have a passageway permitting the formation of a convection path to dissipate heat from the support structure. Such lighting units may be used to replace conventional fluorescent light tubes or other lighting devices, or may be provided as standalone lighting units.

A traffic informational system provides information to traffic moving along a road and may include a plurality of traffic information devices mountable to the road, each having an integral power producing source, at least a first set of illumination sources, and a wireless communications subsystem. The traffic informational system may further include at least a first external control device comprising at least one antenna and a transmitter communication wirelessly with the traffic information devices and / or with one another. The traffic information device may communicate with one another, and may include sensor for sensing ambient conditions. The system employs various approaches to reducing power consumption and improving communications, and is suitable for a wide range of applications, including use in remote environments.

Low-cost intelligent control and communication devices are arranged to communicate with one another over one or more shared physical media, such as a powerline or a radio frequency band. No network controller is needed, because any device can act as a master, slave, or repeater. Adding more devices makes the system more robust, by virtue of a simple protocol for communication retransmissions and retries.