25940results about "General water supply conservation" patented technology

A multi-function, field-deployable resource harnessing apparatus 600 having, in its embodiments, an inflatable reflector apparatus 610 comprising a least one manufactured parabolic mirror made from a pressure-deformable reflective covering of an inflatable ring for focusing electromagnetic energy from radio frequency radiation (RF) through the ultraviolet (UV) radiation including solar energy for (1) heating and cooking, (2) electrical power generation, (3) enhancing the transmission and reception of radio signals, (4) enhancing vision in low-light environments, and / or (5) projection of optical signals or images. The device also has non-electromagnetic uses, such as the collection and storage of water, harnessing of energy from a fluid stream, and / or harnessing wave energy. A first main embodiment of the inflatable reflector apparatus 610 generally utilizes two pressure-deformable membranes, at least one of which is reflective. A second main embodiment utilizes a reflective membrane and a transparent membrane. In addition to the reflector apparatus 610, the modular apparatus 600 typically further includes modular assemblies to increase versatility, facilitate use, and / or enhance safety such as, for example, a modular support and orienting assembly 612, a separate support ring 614, a safety shield or cage 616, a focal point support assembly 618, a safety cover 620, a safety net or mesh 622, and a stabilizing assembly 624. Portability is enhanced by complete collapsing of the inflatable device.

A wind energy conversion system optimized for offshore application. Each wind turbine includes a semi-submersible hull with ballast weight that is moveable to increase the system's stability. Each wind turbine has an array of rotors distributed on a tower to distribute weight and loads and to improve power production performance where windshear is high. As much of the equipment associated with each rotor as possible is located at the base of the tower to lower the metacentric height. The equipment that may be emplaced at the bottom of the tower could include a power electronic converter, a DC to AC converter, or the entire generator with a mechanical linkage transmitting power from each rotor to the base of the tower. Rather than transmitting electrical power back to shore, it is contemplated to create energy intensive hydrogen-based products at the base of the wind turbine. Alternatively, there could be a central factory ship that utilizes the power produced by a plurality of wind turbines to create a hydrogen-based fuel. The hydrogen based fuel is transported to land and sold into existing markets as a value-added “green” product.

A method of producing safe drinking water from virtually any water source utilizing a water purification system is disclosed. The method includes a combination of water purification methods with a control system that evaluates water quality and functional processing parameters, such as pressure and flow. The control system determines what water processing methods to utilize and how most efficiently to operate them. The system is capable of treating highly contaminated water to the necessary degree to produce safe drinking water. Furthermore, the system regulates and cleans itself to maintain functionality despite receiving high concentrations of various contaminants from the feed water source.

Desalination methods that include carbonate compound precipitation are provided. In certain embodiments, feed water is subjected to carbonate compound precipitation conditions prior to desalination. In certain embodiments, desalination waste brine is subjected to carbonate compound precipitation conditions. In yet other embodiments, both feed water and waste brine are subjected to carbonate compound precipitation conditions. Aspects of embodiments of the invention include carbone dioxide sequestration. Embodiments of the invention further employ a precipitate product of the carbonate compound precipitation conditions as a building material, e.g., a cement. Also provided are systems configured for use in methods of the invention.

Systems and methods for monitoring and controlling fluid consumption in a fluid-supply system are disclosed using one or more sensors for generating signals indicative of the operation thereof. In one embodiment, a method of preventing freezing of a conduit for fire suppression fluid in a fire sprinkler system includes sensing, with a temperature sensor, a temperature at a location; and if the sensed temperature falls below a predetermined threshold, sending, to at least one fluid control device interfaced with the conduit, at least one control signal to impede a flow of fire suppression fluid through the conduit.

An energy efficient desalination process that does not produce waste products involves the extraction of water from a first solution, such as seawater, by using a second concentrated solution to draw the water from the first solution across a semi-permeable membrane. By manipulating the equilibrium of the soluble and insoluble species of solute within the second solution in favor of the soluble species of the solute, a saturated second solution can be used to generate osmotic pressure on the first solution. Also, by adjusting the equilibrium in favor of the less soluble species after the water has been drawn from the first solution, a portion of the solute can easily be precipitated out. Heating the second solution decomposes the solute into its constituent gasses. The constituent gasses and precipitated solute may be recycled through the process to affect the changes in equilibrium and eliminate waste products. Additionally, by using the waste steam from industrial sources and a heat pump to effectively distribute heat through the present method, the present method exhibits greater energy efficiency than prior art methods.

A process and system for purifying water is disclosed. For example, in one embodiment, the process may be used to remove a divalent salt, such as calcium sulfate, from a water source in order to prevent the divalent salt from precipitating during the process. The water source, for instance, may be fed to an ion separating device, such as an electrodialysis device. In the electrodialysis device, an ion exchange takes place between the divalent salt and another salt, such as a monovalent salt to produce two concentrated salt streams that contain salts having greater solubility in water than the divalent salt. In one embodiment, the two salt streams that are produced may then be combined to precipitate the divalent salt in a controlled manner. During the process, various other components contained within the water feed stream may also be removed from the stream and converted into useful products. In one particular embodiment, the process is configured to receive a byproduct stream from a reverse osmosis process.

A desalination process is disclosed which combining two or more substantially different water treatment processes in a unique manner to desalinate saline water, especially sea water, to produce a high yield of high quality fresh water, including potable water, at an energy consumption equivalent to or less than much less efficient prior art desalination processes. In this process a nanofiltration step is synergistically combined with at least one of sea water reverse osmosis, multistage flash distillation. multieffect distillation of vapor compression distillation to provide an integrated desalination system by which sea water can be efficiently and economically converted to high quality potable water in yields which are at least 70%-80% greater than the yields available from the prior art processes. Typically a process of this invention using the nanofiltration initial step will produce, with respect to sea water feed properties, calcium, magnesium, sulfate and bicarbonate ion content reductions of 63%-94%, pH decreases of about 0.4-0.5 units and total dissolved solids content reductions of 35%-50%.

Methods are disclosed to de-sulfate saline streams such as seawater, brine from seawater desalination plants, and the like. The disclosed methods can also co-produce de-ionized water and inorganic materials from such de-sulfated saline streams.

Reverse osmosis membranes made by interfacial polymerization of a monomer in a nonpolar (e.g. organic) phase together with a monomer in a polar (e.g. aqueous) phase on a porous support membrane. Interfacial polymerization process is disclosed for preparing a highly permeable RO membrane, comprising: contacting on a porous support membrane, a) a first solution containing 1,3-diaminobenzene, and b) a second solution containing trimesoyl chloride, wherein at least one of solutions a) and b) contains nanoparticles when said solutions are first contacted, and recovering a highly permeable RO membrane.

Composite membranes that exhibit long-term resistance to biofouling comprise a porous support and a crosslinked polyamide discriminating layer having an external surface, the discriminating layer comprising a branched poly(alkylene oxide) (PAO) polymer attached to its external surface. The branched PAO polymer typically has the structure of a molecular comb or brush, and is made by polymerization of a PAO macromonomer of the following formula: RO—[(CHR′)n—O]m-V in which R is hydrogen or a C1-20 aliphatic or aromatic group, V is any group containing a polymerizable site, each R′ is independently hydrogen or a short chain alkyl group, n is an integer of 1-6, and m is an integer of 1 to about 200. The α end group can be either polymerized or copolymerized.

A thin film composite or TFC membrane formed by interfacial polymerization of an organic and aqueous phase on a support membrane with nanoparticles in the discrimination layer and / or the support membrane, optimized by the selection of nanoparticles for membrane flux, hydrophilicity and to minimize thickness of the support membrane while maintaining the strength and ruggedness characteristics required for forward osmosis (FO) and / or pressure retarded osmosis (PRO) so that the flux flow paths are less tortuous than conventional support membranes and thereby provide increased flux flow.

A free-standing flow-through capacitor (FTC) is constructed by concentrically winding two electrodes and two dividers into a hollow-center roll. A liquid-feeding pipe is inserted to the central opening for delivering fluids to the FTC. Nanoparticles of hydrated iron compound with Fe3O4 as the main component or its composite powders are used as the active materials for the electrodes. With channels crated by the dividers assembled in the roll, fluids injected from the feed pipe are confined inside the FTC, and flow outwardly and transversely through the entire length of the electrodes. Under an application of a low DC voltage to the electrodes, charged species are adsorbed and removed from the treated liquids as soon as they are in contact with the electrodes. Capacitive deionization using FTC of the present invention is applicable to waste-streams reduction, water purification and desalination at low costs and easy operation.

Provided is a consumer to industrial scale renewable energy based quintuple-generation systems and energy storage facility. The present invention has both mobile and stationary embodiments. The present invention includes energy recovery, energy production, energy processing, pyrolysis, byproduct process utilization systems, separation process systems and handling and storage systems, as well as an open architecture for integration and development of additional processes, systems and applications. The system of the present invention primarily uses adaptive metrics, biometrics and thermal imaging sensory analysis (including additional input sensors for analysis) for monitoring and control with the utilization of an integrated artificial intelligence and automation control system, thus providing a balanced, environmentally-friendly ecosystem.

A reverse osmosis composite membrane that has a high salt rejection, a high water permeability, and a high fouling tolerance, and permits practical desalination at a relatively low pressure is provided by coating the surface of a reverse osmosis membrane of aromatic polyamide with polyvinyl alcohol (PVA), for example, and controlling the surface zeta potential of the separation layer within±10 mV at pH 6. This reverse osmosis composite membrane is electrically neutral and controls the electrical adsorption of membrane-fouling substances having a charge group present in water. Therefore, a high separation property can be maintained without fouling the membrane even if water containing a surfactant or a transition metal component is supplied as raw water.

A system including a sensing device including a pressure sensor configured to measure pressure of water in a water system of a structure. The sensing device can be configured to generate pressure measurement data representing the pressure of the water as measured by the pressure sensor. The system also can include one or more processing units including one or more processors and one or more non-transitory storage media storing machine executable instructions configured when run on the one or more processors to perform detecting a non-cyclical pressure event corresponding to a water leak in the water system of the structure during a first time period based on an analysis of information including the pressure measurement data. The information analyzed in the analysis does not include any flow measurement data that represents a total amount of flow of the water in the water system of the structure during the first time period. The pressure sensor can be coupled to the water system of the structure at a single location of the water system of the structure when measuring the pressure of the water in the water system of the structure. Other embodiments are provided.

An impulse-type “wave motor” employs a seabed-mounted or supported structure mounting a wave energy absorbing panel on a hinged lever arm for reciprocation motion to obtain optimal absorption of wave energy from wave motion in the sea. For deepwater wavelengths of L, the panel is optimally positioned in a region within L / 2 depth from the sea surface. The panel motion is coupled by a connecting rod to a fluid pump which generates a high-pressure fluid output that may be used to drive a reverse osmosis desalination unit or to produce other useful work. Seawater or brackish water may be desalinated through reverse osmosis membranes to produce water quality for consumption, agricultural, or other uses. The submerged operating environment of the device in a region of one-half the design wavelength provides the maximum available energy flux and forced oscillations. The pump may be of the positive-displacement piston type, plunger type, or multi-staging driver type, or a variable volume pump.

A portable, personal apparatus for treating drinking water comprises a generally tubular or cylindrical filter housing containing filtration media and water-permeable screen or mesh or felt or membrane or netting layer at the top and bottom ends of the filter. The design of the apparatus involves the bottle exterior and interior contouring to the filter and enables the efficient and rapid gravity flow of water in through the filter. The apparatus may be configured such that water is first passed through a top reservoir designed to receive water, followed by a porous mesh, followed by granular filtration and antimicrobial media agitated by turbulent motion of influent water, followed by a porous mesh before reaching a durable and reusable water containment vessel.

Disclosed herein are embodiments relating to particular systems comprising a selective transfer membrane that can be utilized in material separation. In certain embodiments, the membrane assembly comprises part of a desalination, distillation, liquid purification, and / or heating and cooling system. Other particular embodiments allow for a high rate of thermal capture by way of the system utilizing a selective transfer membrane. Certain preferred embodiments include a selective transfer membrane comprising an ionomeric polymer that is permeable to high dipole materials.

A method or process for treating wastewater containing high organics, silica, boron, hardness, and suspended and dissolved solids. The method includes degasifying the wastewater for the removal of dissolved gases and thereafter chemically softening the wastewater. After the chemical softening step, the wastewater is directed through a media filter or membrane which removes additional solids and precipitants. Thereafter the wastewater is directed through a sodium ion exchange that further softens the wastewater. The effluent from the ion exchange is directed through a cartridge filter and the effluent from the cartridge filter is directed through one or more reverse osmosis units. At a selected phase of the process, prior to the wastewater reaching the reverse osmosis unit or units, the pH of the wastewater is raised and maintained such that the pH of the wastewater reaching a reverse osmosis unit is at a pH greater than 10.5.

The present invention provides systems and methods that identify a flow anomaly to an operator or other person by: executing a first device of a plurality of water using devices; receiving flow data on a quantity of water used by the first device during a time period required to generate a first water use signature from the first device; comparing a future water use pattern against the first water use signature to identify a flow anomaly with the first device; and providing information regarding the flow anomaly to the person. Identifying anomalies can be useful in numerous ways, including discovering problems that need fixing, reducing waste, and even calculating appropriate irrigation application rates.

A process for purification of fluids, for example, desalination of seawater or brackish water, using organic solutes in a concentrated water solution for use in a forward osmosis process, to extract fresh water out of salt water through the forward osmosis membrane, and subsequently separating the organic solutes out of the diluted forward osmosis permeate by cloud point extraction, thereby regenerating a concentrated organic solution for recycling to the forward osmosis process, and fresh water for potable water use.

A diffusion driven desalination apparatus and related method includes structure for receiving a heated water stream and creating at least one region having a thin film of water and structure for forcing a low humidity air stream over the thin film of water, wherein water from the thin film of water evaporates and diffuses into the air stream to create a humidified air stream. A diffusion tower including at least one plenum can be used to create and transfer the humidified air stream. At least one condenser, such as a direct contact condenser, condenses the humidified air stream, wherein purified water is produced. Waste heat from a power plant can be used to provide the heated water stream and power plants can use the waste heat generated to inexpensively provide purified water.

An apparatus for purifying water, such as for desalinization, includes a source of a heated air stream, the heated air stream having a temperature above an ambient temperature. A diffusion tower having high surface area material therein receives a water stream including at least one impurity and creates at least one region having thin films of water therein from the water stream. The heated air stream is directed over the thin films of water to create a humidified air stream that is at least substantially saturated. At least one direct contact condenser is in fluid communication with the humidified air stream for condensing the humidified air stream, thus producing purified water. A power plant can include the apparatus for purifying water, where energy to heat the air stream is provided by low pressure condensing steam.

The present invention discloses a desalination plant that operates with a sea water or brackish water feed and produces a concentrated and selectively improved salt reject stream and a pure water permeate stream from a first treatment section that is arranged to produce primarily water at high recovery using membrane desalination processes. The reject stream from the first treatment line has a component distribution that is substantially reduced in native di- and polyvalent scaling ions, essentially depleted of sulfate, has substantially higher total dissolved solids than a traditional sea water reverse osmosis reject, yet is suitable for thermal treatment processes. The system may be enhanced by monovalent salt components. The unit may be integrated with a second treatment section, in which the first reject stream is further concentrated, purified, and processed to produce a high purity salt product.

Sodium chloride and purified water are recovered by treating salt water that contains sodium chloride with an integrated reverse osmosis and electrodialysis system, which includes an efficiency-enhancing feature that is one or more of the following: the use of univalent anion and univalent cation selective membranes in the electrodialysis unit; the addition of a nanofiltration unit to process the diluate from the electrodialysis unit; or operation of the electrodialysis unit at an elevated pressure. Magnesium and bromine can optionally be produced when the salt water contains these materials.

A water quality detection system for distributed water supply network. The system, 1, comprises a multiplicity of detectors, 5, wherein each detector of the detectors is capable of monitoring at least one attribute of water and providing a signal related to the attribute. A controller, 7, is provided which is capable of receiving each signal and comparing the signal to a control signal for the attribute. A response mechanism, 9, is responsive to the controller and activated when at least one signal matches the control signal. An access gate, 10, limits access to at least one of the detector, the controller or the response mechanism. An access key, 13, is provided for comparing a user attribute with a stored attribute wherein when the user attribute matches the stored attribute access is provided into the access gate.

A hydro-thermal exchange unit (HTEU) for desalinating feed water in accordance with a humidification-dehumidification includes feed water, fresh water and gas conduit circuits for transporting feed water, fresh water, and gas, respectively. The unit also includes an evaporator through which a portion of the feed water conduit and the gas conduit pass. The evaporator causes evaporation of a portion of the feed water to produce vapor that is transported through the gas conduit. The unit also includes a condenser through which a portion of the gas conduit and the fresh water conduit pass. The condenser has input and output ports for coupling the gas and fresh water conduit circuits. The condenser extracts moisture from the vapor transported therethrough by the gas conduit. The extracted moisture is discharged through the fresh water conduit. The unit also includes a heat exchanger through which a portion of the fresh water conduit and the feed water conduit pass to thereby extract residual heat from the fresh water such that the residual heat heats the feed water.

The invention relates to a desalination method and system that uses freeze crystallization technology that incorporates the use of compressed air energy as the source for freezing temperatures. When compressed air is released by a turbo expander, chilled air is produced as a by-product, wherein the chilled air is introduced into a crystallization chamber. Also injected into the chamber is a spray cloud of seawater droplets, which has been pre-chilled by heat exchange with the cold chamber walls, and which is then circulated and exposed to the chilled air in the chamber. The sizes of the droplets can vary, but are preferably predetermined, along with the relative temperatures, flows and speeds of the spray and chilled air, such that when the droplets are circulated within the chilled air, and settle at the bottom of the chamber, they are deposited at slightly above the eutectic temperature. This way, the ice / snow mass that forms at the bottom of the chamber will consist of frozen ice crystals, and a residue of salt water brine, which can runoff from the mass, either from the sides, or through any voids or channels that may form within the mass.