48results about How to "Robust and cost-effective" patented technology

A continuous and modular process converts lignocellulosic materials for the production of ethanol principally and / or chemicals such as methanol, butanediol, propanediol, hydrocarbon fuel, etc. Renewable lignocellulosic biomass such as but not all inclusive hardwoods (gum, beech, oak, sweet gum, poplar, eucalyptus, etc.), soft woods (pines, firs, spruce, etc.), corn stovers, straws, grasses, recycled papers, waste products from pulp and paper mills, etc can be used as feedstock. The process is designed to be modular and the feed entry point can be selected to adapt to different biomass feedstock. Lignocellulosic biomass such as hardwood and softwood are subjected to chemical / pressure treatment stages using potent and selective chemicals such as sodium chlorite / acetic acid (anhydrous) and chlorine / chlorine dioxide to separate the main components—lignin, cellulose (glucose) and hemicelluloses (xylose, arabinose, galactose)—into three process streams. The separated carbohydrates are further subjected to washing, cleaning, neutralization, and / or mild hydrolysis and subsequently fermented to produce ethanol. Residual lignin and extractives remained with the cellulose are removed by chemical treatment steps to enhance the fermentations of cellulose. Pre-hydrolysate after neutralization to neutralize and remove toxic components such as acetic acid, furfural, phenolics, etc. containing (xylose, arabinose, galactose) and hexoses (glucose) can be either separately or together with the purified cellulosic fraction fermented to produce ethanol. Approximately 100 gallons of ethanol, suitable to be used as a fuel, can be produced from one dried ton of wood. Significant amount of lignin are separated as a by-product and can be converted to hydrocarbon fuel, surfactant, drilling aid, or can be incinerated for generation of power and steam.

The invented process separates main components in lignocellulosic biomass, specifically hardwoods, softwoods into lignin and fractions of high purity sugars which are used for ethanol production. The invented process comprises of treatment stages at high temperature and high pressure with hydrochloric acid or sulfuric acid. Residual lignin and extractives in the cellulosic solid fraction are selectively removed by chemical treatments of sodium chlorite, anhydrous acetic acid, chlorine and chlorine dioxide to enhance the purity and biological conversion of cellulose to ethanol. The pre-hydrolysate generated from the acid treatment stage, containing xylose, arabinose, galactose, glucose and the purified cellulosic fraction are enzymatically hydrolyzed and fermented to produce ethanol. Significant amount of lignin from the process is recovered as a by-product.

The invention relates to a novel methodology and apparatus for clock-offset compensation and common-phase offset correction in Frequency Division Multiplixing based wireless local area network (WLAN) environment, such as an Orthogonal Frequency Division Multiplexing (OFDM) environment. A curve fit, such as a threshold-based, least mean squares (LMS) fit of phase of the pilot sub-carriers in each OFDM symbol is used to estimate and counteract the rotation of the data sub-carriers due to residual frequency offset, low frequency phase noise, and clock offset. The invention is particularly well suited to wireless channels with multipath where pilots typically undergo frequency-selective fading. The thresholding LMS is implemented in a hardware-efficient manner, offering cost advantages over a weighted-LMS alternative. Additionally, the invention uses a unique phase-feedback architecture to eliminate the effects of phase wrapping, and avoid the need to refine channel estimates during packet reception.

A cost-effective and robust method for localizing and tracking drowsiness state of the eyes of driver by using images captured by near infrared (IR) camera disposed on the vehicle, the said method comprising the processor implemented steps of: Real-time tracking of the face and localizing eye bounding box within the face bounding box in the captured image by comparing the gray values with threshold using the segmentation process; tracking the eyes by computing the centroid of the eye, target model histogram and target candidate model histogram for one location to another by comparing them to identify distance and calculating the displacement of the target centre by the weighted means, wherein the target model histogram and target candidate model histogram are computed based on the feature space; and detecting the drowsiness state of the eyes using histogram equalization, Morphological operations and texture based parameters using histogram and grey level co-occurrence matrices.

A tunable multiple laser pulse scanning microscope and a method of operating the same is described, applying two pulsed laser beams with distinct wavelengths incident on a scanning spot of a sample to be imaged simultaneously or at a specific time delay. The microscope comprises at least two pulsed laser light sources emitting laser light of distinct wavelengths, an acousto-optic tunable filter (AOTF) for tuning at least one of the laser pulses, a delay stage provided upstream of the AOTF, and an actuator for moving delay stage depending on the time delay. As a result, the wavelength of at least one type of pulses is tuned, and the delay between at least two pulses of distinct wavelengths is adjusted.

A multiple robot control architecture including a plurality of robotic agricultural machines including a first and second robotic agricultural machine. Each robotic agricultural machine including at least one controller configured to implement a plurality of finite state machines within an individual robot control architecture (IRCA) and a global information module (GIM) communicatively coupled to the IRCA. The GIMs of the first and second robotic agricultural machines being configured to cooperate to cause said first robotic agricultural machine and said second agricultural machine to perform at least one agricultural task.

A piezoelectric-photovoltaic hybrid structure is described, having a plurality of superposed layers including a photo voltaic layer and a piezoelectric substrate. A method of forming such a structure is also described, including the steps of providing a piezoelectric substrate and superposing a photovoltaic layer over the substrate. A power conversion system is described, comprising such a hybrid structure with a first circuit connected to the piezoelectric substrate and a second circuit connected to the photovoltaic layer. Also discussed is a method of generating, storing, distributing, or consuming electrical energy, involving the use of such a system in connection with a distribution circuit or network, electrical load, or energy storage device. A further power conversion system is described where the piezoelectric and photovoltaic circuits are connected to a single, or a respective, DC-DC converter. A set of such power conversion systems may be connected in series at their output terminals.

A method for operating a soot sensor that has an interdigital electrode structure, to which a measurement voltage is applied. Soot particles from an exhaust gas flow are deposited onto the interdigital electrode structure and the measurement current is evaluated as a measure of the soot load of the soot sensor. The interdigital electrode structure is burned clean at or above a predetermined soot load, which is detected by means of an upper current threshold. The method includes burning the interdigital electrode structure clean by heating up the soot sensor after the upper current threshold has been reached; monitoring the measurement current while the interdigital electrode structure is being burned clean; and stopping the burning clean when the value of the measurement current has reached a lower current threshold.

A switched reluctance drive is controlled without using a physical rotor position detector. The control method estimates the standing flux-linkage associated with the phase and uses this estimate to improve its subsequent estimate of rotor position. The method works robustly regardless of whether the current is continuous or is discontinuous.

Systems and methods are described for monitoring the surface flow velocity and volume discharge of rivers and channels using a VHF / UHF radar located in operative relationship with a riverbank. This frequency region allows precise estimation and removal of the Bragg wave velocity; it also is matched to the short wind-wave roughness periods existing on river surfaces so that operation is possible nearly all the time. Methods of bearing determination are also disclosed. Up / downriver surface velocity profiles vs. distance across the river may be constructed from maps of the radial velocity component from a single radar at thousands of points within the radar's coverage. Methods to compensate for Doppler aliasing under high flow conditions are also shown.

An AC power distribution unit for coupling AC power having a fundamental frequency to a plurality of electrical loads has an enclosure. A power input feed is retained by the enclosure for coupling to a source of the AC power. A plurality of power output feeds is retained by the enclosure for coupling to the plurality of electrical loads. A harmonic mitigation module is retained in the enclosure and is connected in series between the power input feed and the plurality of power output feeds. The harmonic mitigation module bilaterally reduces harmonic current distortion above a predetermined frequency between the power input feed and the plurality of power output feeds.

A switched radio frequency (RF) and Internet Protocol (IP) audio / video processing and distribution appliance that enables virtually any format of audio / video to be received, decrypted, transcoded, encrypted and distributed over a high speed IP backplane and output or modulated in a variety of formats. The system minimizes the number of points of failure to provide an extremely robust and cost effective solution for MDU and hospitality markets both in terms of initial cost and long-term maintenance costs.

A tunable multiple laser pulse scanning microscope and a method of operating the same is described, applying two pulsed laser beams with distinct wavelengths incident on a scanning spot of a sample to be imaged simultaneously or at a specific time delay. The microscope comprises at least two pulsed laser light sources emitting laser light of distinct wavelengths, an acousto-optic tunable filter (AOTF) for tuning at least one of the laser pulses, a delay stage provided upstream of the AOTF, and an actuator for moving delay stage depending on the time delay. As a result, the wavelength of at least one type of pulses is tuned, and the delay between at least two pulses of distinct wavelengths is adjusted.

A sealing assembly has an expansion band having an arcuate band portion and a pair of threaded end portions formed at opposing ends of the arcuate band, in which the arcuate band and threaded end portions are monolithically formed as a single piece. Fixed within respective threaded end portions are a pair of oppositely threaded nuts adapted to receive a bolt having correspondingly oppositely threaded ends. Rotation of the bolt causes the threaded end portions to be simultaneously driven apart or drawn toward one another (depending on the rotation direction of the bolt) to thereby expand or contract the overall outer profile of the arcuate band portion. The monolithically formed expansion band may be made of an inexpensive, non-rusting material such as nylon 66, and glass fibers and / or additives may be employed to impart strength and flexibility.

Provided herein are methods and devices for rapidly and accurately heating fluid droplets surrounded by a gas-phase medium, such as air. Sub-nanoliter fluid droplets can be rapidly heated by nanoscale field effect transistors via microwave heating by an applied AC voltage to the FET. The heating is in a well-defined interior portion of the fluid droplet, with minimal heating of the outer portion of the fluid droplet, thereby minimizing evaporation. In this manner, rapid thermal cycling is possible, including independently and in parallel for a plurality of droplets. Accordingly, the methods and devices provided herein are used in point-of-care detection such as by PCR that is high speed, robust and of low cost.

Embodiments of a limb retainer system to secure bow limbs to a riser on an archery bow. The limb retainer system includes a first part and a second part that are disposed, respectively, on a front and a back of the riser to position the limb elements to retain a shooting string under tension. In one embodiment, the first part secure the limb elements in position on the riser. The second part is configured to rotate relative to the first part, thereby allowing an end user to adjust the tension of the bowstring. This configuration offer a robust, cost effective design that prevents unwanted movement of the bow limbs and preserves adjustment necessary for adequate tuning of the archery bow.

Systems and methods are described for monitoring the surface flow velocity and volume discharge of rivers and channels using a VHF / UHF radar located in operative relationship with a riverbank. This frequency region allows precise estimation and removal of the Bragg wave velocity; it also is matched to the short wind-wave roughness periods existing on river surfaces so that operation is possible nearly all the time. Methods of bearing determination are also disclosed. Up / downriver surface velocity profiles vs. distance across the river may be constructed from maps of the radial velocity component from a single radar at thousands of points within the radar's coverage. Methods to compensate for Doppler aliasing under high flow conditions are also shown.

A method of optimizing a WDM optical ring network configuration using a genetic algorithm. Preferably, the method includes the steps of initially defining one or more parameters for a WDM optical network or portion of a WDM optical network and creating a plurality of parents each having a gene structure corresponding to the one or more parameters of the WDM optical network or portion thereof. The parents are then ranked according to predetermined fitness criteria. The highest ranking parents are then mated to form one or more children. Preferably, the children are then optionally mutated before or after testing to ensure that they satisfy predetermined network demands. Suitable children replace lower ranking parents to form new parents. The process is then repeated by mating the highest ranking parent in an effort to further optimize the network. Various steps in the genetic algorithm can be repeated until an optimal design is achieved.

A method for determining driver distraction in a vehicle is disclosed. The method comprises receiving a signal comprising information about user-interaction with an in-vehicle human machine interface (HMI), and determining a first state of the driver based on the received information. The first state comprises at least one distraction parameter. Further, the method comprises determining a second state of a driver of the vehicle by means of a driver monitoring system (DMS), where the second state of the driver comprises at least one attention parameter, and sending a signal to a control system of the vehicle based on the determined first state of the driver and the determined second state of the driver. A corresponding computer-readable storage media, a control device, and a vehicle are also disclosed.

Embodiments of a limb retainer system to secure bow limbs to a riser on an archery bow. The limb retainer system includes a first part and a second part that are disposed, respectively, on a front and a back of the riser to position the limb elements to retain a shooting string under tension. In one embodiment, the first part secure the limb elements in position on the riser. The second part is configured to rotate relative to the first part, thereby allowing an end user to adjust the tension of the bowstring. This configuration offer a robust, cost effective design that prevents unwanted movement of the bow limbs and preserves adjustment necessary for adequate tuning of the archery bow.

Methods for performing an end-point assay of protein disulfide isomerase activity. The method may be based on the enzyme-catalyzed reduction of insulin in the presence of dithiothreitol; measuring the aggregation of reduced insulin chains at 650 nm; and using hydrogen peroxide as a stop reagent.

A sealing assembly has an expansion band having an arcuate band portion and a pair of threaded end portions formed at opposing ends of the arcuate band, in which the arcuate band and threaded end portions are monolithically formed as a single piece. Fixed within respective threaded end portions are a pair of oppositely threaded nuts adapted to receive a bolt having correspondingly oppositely threaded ends. Rotation of the bolt causes the threaded end portions to be simultaneously driven apart or drawn toward one another (depending on the rotation direction of the bolt) to thereby expand or contract the overall outer profile of the arcuate band portion. The monolithically formed expansion band may be made of an inexpensive, non-rusting material such as nylon 66, and glass fibers and / or additives may be employed to impart strength and flexibility.

The invention concerns a subsea water processing system comprising an electrochemical unit that uses raw or treated seawater to generate high pH and low pH solutions that are used to clean at least one subsea process apparatus during a cleaning cycle by circulation through the at least one subsea process apparatus via acid or base flow lines connecting the electrochemical unit with the subsea process apparatus on-site.

A plunger rod includes: an elongated body formed by a plurality of orthogonally spaced elongated ribs extending along a longitudinal axis; a first ledge adjacent a first end of the elongated body; a second ledge adjacent a second end of the elongated body; and an attachment portion extending from the second ledge. The second end of the elongated body opposes the first end of the elongated body. At least one elongated rib includes a retaining anchor positioned adjacent the second end adjacent the second ledge.

The invention relates to a novel methodology and apparatus for clock-offset compensation and common-phase offset correction in Frequency Division Multiplexing based wireless local area network (WLAN) environment, such as an Orthogonal Frequency Division Multiplexing (OFDM) environment. A curve fit, such as a threshold-based, least mean squares (LMS) fit of phase of the pilot sub-carriers in each OFDM symbol is used to estimate and counteract the rotation of the data sub-carriers due to residual frequency offset, low frequency phase noise, and clock offset. The invention is particularly well suited to wireless channels with multipath where pilots typically undergo frequency-selective fading. The thresholding LMS is implemented in a hardware-efficient manner, offering cost advantages over a weighted-LMS alternative. Additionally, the invention uses a unique phase-feedback architecture to eliminate the effects of phase wrapping, and avoid the need to refine channel estimates during packet reception.

An endoscope with lateral illumination including: an endoscope shaft with an outer tube; an input lens arranged in a distal area of the outer tube, the input lens having a viewing direction pivotable in at least one pivot plane; two or more illumination optical-fiber bundles terminating at output surfaces at a distal tip, wherein a first illumination optical-fiber bundle generates an illumination, at a 0° viewing angle, and a second illumination optical-fiber bundle generates an illumination of another area with a lateral viewing angle or lateral viewing-angle range of between 0° and 90°; and one or more light-emitting diodes arranged in or on a circumference of the endoscope shaft in an area of the distal tip, wherein the light-emitting diode(s) is / are arranged in the pivot plane and / or around the pivot plane, in order to generate an illumination at a viewing angle or a viewing-angle range of about 90°.

Pump units are known that have a drive shaft and a rotor, which is driven by the drive shaft and is arranged rotatably in a housing, the drive shaft having an oblique sliding plane, which interacts with the rotor and allows the rotor to nutate with the rotor axis thereof about a drive axis of the drive shaft, the rotor having a set of teeth on the end face of the rotor facing away from the drive shaft, said teeth meshing with a set of teeth formed on a housing of the pump unit, working spaces being formed between the teeth of the rotor and the teeth of the housing, which working spaces can be filled via an inlet and emptied via an outlet. It is disadvantageous that the pump unit has a comparatively large axial installation length, because the drive of the pump unit is arranged on an end of the drive shaft facing away from the rotor. In the pump unit according to the invention, the axial installation length is shortened. According to the invention the drive shaft (1) is surrounded by a stator (15) and magnets (16) are provided on the drive shaft (1), which magnets interact magnetically with the stator (15).