5255 results about "Signal level" patented technology

An adapter allows the interconnection of a sensor originating from one manufacturer to be coupled with conventionally incompatible monitors originating from other manufacturers to form a properly functioning pulse oximetry system. The adapter matches a sensor driver in a monitor to the current requirements and light source configuration of a sensor. The adapter also matches a sensor's light detector signal level to the dynamic range requirements of a monitor preamplifier. Further, the adapter provides compatible sensor calibration, sensor type and security information to a monitor. The adapter may have a self-contained power source or it may derive power from the monitor, allowing both passive and active adapter components. The adapter is particular suited as an adapter cable, replacing a conventional patient cable or sensor cable as the interconnection between a sensor to a monitor in a pulse oximetry system.

A method and system for detecting proximity of a nerve to a proximity electrode and status of nerve. The method of detecting the proximity of the nerve to the proximity electrode applies a first electrical signal with multiple current levels to a calibration electrode. The method applies a second electrical signal with multiple current levels to the proximity electrode. Based on the response of the nerve to the first and second electrical signals, the method determines the proximity of the proximity electrode to the nerve. The method determines the status of the nerve by applying the first electrical signal with multiple signal levels to the calibration electrode.

A method, transceiver integrated circuit (IC), and communications device for generating antenna tuning states derived from a pre-established trajectory of tuning states to adjust a detected signal level towards a preset, given value. A tuning state generation (TSG) controller determines whether a detected signal level matches a given value. If the detected signal level does not match the given value, the TSG controller selects an initial preset tuning state from a pre-established trajectory corresponding to a pre-identified operating condition that best matches a current operating condition. The TSG logic forwards the initial preset tuning state to the antenna tuner to trigger impedance transformation. Following generation of the initial preset tuning state, the controller receives an updated detected signal level. If the updated detected signal level fails to match the given value, the controller generates an incremental tuning state that is interpolated between the initial and a final preset tuning states.

Rather than costly modifications to existing radars, a small, low cost radar warning receiver is used to monitor the RF environment. This add-on receiver can provide situational awareness including RF signal levels and angle of arrival, and recommend or provide antenna scanning synchronization, blanking inputs or gated reactionary outputs to or for the airborne radar. Utilization of this information can be used to reduce false alarms and improve system performance.

An audio power display provides a signal and an update rate. An audio power monitoring system comprises a digital display unit including at least one light-emitting display element and a rapid update rate. The digital display unit displays signal levels at the rapid update rate to emphasize the dynamic nature of music. In one embodiment, the display update rate is varied to increase proportionally to increases in signal level, and decrease proportionally to decreases in signal level to further represent the dynamic nature of music.

An energy-efficient consumer device audio power output stage provides improved battery life and reduced power dissipation. A power supply having a selectable operating mode supplies the power supply rails to the power amplified output stage. The operating mode is controlled in conformity with the audio signal level, which may be determined from a volume control setting of the device and / or from a signal level detector that determines the amplitude of the signal being amplified. The power supply may be a charge pump in which the operating mode uses a capacitive divider to provide for selection of a power supply output voltage that is a rational fraction of the power supply output voltage in a full-voltage operating mode.

A method of controlling video signals in a multi-participant video conference involves assessing the level of video signal required from each participant to mix the desired broadcast video signals, and using the result of this assessment to dynamically control the video output from the endpoints of the conference participants. The assessment of the required level of video signal preferably utilizes an audio mixing algorithm, such that the video outputs of those participants whose audio signals are currently being discarded in the audio mixing process are switched off at the endpoints, or are transmitted in a lower bandwidth format, thereby reducing the overall bandwidth requirements of the conference and reducing processor resources to mix the broadcast video signals.

An image sensing apparatus including: an image sensor including a plurality of focus detection pixel pairs that perform photoelectric conversion on each pair of light beams that have passed through different regions of a photographing lens and output an image signal pair; a flash memory that stores shift information on relative shift between an optical axis of the photographing lens and a central axis of the focus detection pixel pairs; a correction unit that corrects a signal level of the image signal pair based on the shift information and exit pupil information of the photographing lens so as to compensate for an unbalanced amount of light that enters each of the focus detection pixel pairs; and a focus detection unit that detects a focus of the photographing lens using the image signal pair corrected by the correction unit.

A computer implemented method to extract a selected subject from its background, by removing the background, including that portion of the background visible through semi transparent areas of the subject, and generating a matte signal containing a record of background levels outside of and within semitransparent subject areas. The observed RGB signal levels of a pixel in the semitransparent transition between a subject and its background, are a mixture of color contributed by the subject, and by the background. The estimated subject color, and the estimated background color, and the observed color of a transition pixel (pixRGB), may be shown as three points in a three dimensional color space.

A method for supporting handover in a BWA communication system is provided. The system includes an MS, a serving BS, and a plurality of neighbor BSs. The coverage area of each of the BSs is divided into sectors using different subcarrier bands. The MS collects information broadcast from the serving BS on the serving BS and the neighbor BS, measures a signal level for each of the sectors of the serving BS and the neighbor BSs according to the collected information, and sends a handover request based on the measured signal level for each of the sectors. The serving BS broadcasts information on the serving BS and the neighbor BS to the MS, determines if the MS can perform a soft handover from its current sector to another sector upon receiving the handover request from the MS, and permits the MS to perform the soft handover if possible.

A reduction in a peak-to-mean envelope power ratio of a multicarrier signal, represented as a time domain signal, is achieved by applying (76) an offset, indicative of a difference (74) between a mean signal level and a midpoint level of the time domain signal, to the time domain signal. Alternatively, constellation values of positive and negative frequency components are modified by differing functions to produce a modified data set. Preferably, the negative frequency components are set to a predetermined value (namely zero (124)) to provide an alternate coding scheme Once the multicarrier signal has been converted into a time domain representation, real and imaginary parts (126-128) of the modified data set that consequently only contain positive frequency components and zeros are compared with one another to identify (130) which of the real and imaginary parts has a lower peak-to-average signal ratio (134) for the time domain representation. Then, based upon which of the peak-to-average signal ratios is lowest (136), either the real and imaginary part of the time domain signal is selected for subsequent transmission (138).

Many electrical sensing devices include an array of transducer elements for converting external stimuli to electrical indications. Novel technologies to realize improvements in low power consumption, low noise, and analog output path which occupies minimal die area while maintaining certain data rates are disclosed. A two stage pipeline architecture of the invention in the analog output path maintains fast pixel rates with minimal ADC (analog digital converter) arrangement. A novel power supply and the use of differential amplifiers in connection with a black signal level as a reference voltage are also described.

Pronunciation issues for synthesized speech are automatically detected using human recordings as a reference within a Speech Recognition Assisted Evaluation (SRAE) framework including a Text-To-Speech flow and a Speech Recognition (SR) flow. A pronunciation issue detector evaluates results obtained at multiple levels of the TTS flow and the SR flow (e.g. phone, word, and signal level) by using the corresponding human recordings as the reference for the synthesized speech, and outputs possible pronunciation issues. A signal level may be used to determine similarities / differences between the recordings and the TTS output. A model level checker may provide results to the pronunciation issue detector to check the similarities of the TTS and the SR phone set including mapping relations. Results from a comparison of the SR output and the recordings may also be evaluation by the pronunciation issue detector. The pronunciation issue detector outputs a list that lists potential pronunciation issue candidates.

Apparatus includes generator generating reference signal based on noise emitted from sound source, detector detecting level of reference signal and change in level, unit comparing change with threshold-value range and produce compared result, filter filtering reference signal, adaptive filter having variable filter coefficient, unit updating filter coefficient according to change of level of reference signal for obtaining an updated filter coefficient, unit stopping updating of filter coefficient in response to compared result when change falls outside threshold-value range, unit storing updated filter coefficient each time filter coefficient is updated, generator generating control signal using stored filter coefficient, unit generating control sound based on control signal, microphone detecting synthesis sound pressure of control sound and noise to produce an error signal, and unit setting stored filter coefficient to more accurate coefficient than stored filter coefficient based on error signal, and signal acquired by filtering control signal through filter.

Techniques for improved timing control of memory devices are disclosed. In one embodiment, the techniques may be realized as a memory controller to communicate with a memory device via a communications link. The memory controller may comprise a memory interface to exchange data with the memory device via a set of N conductors according to at least one clock, the data being encoded such that each M bits of data are represented by at least one symbol and each symbol is associated with a combination of signal levels on a group of n conductors, wherein M<N and n is equal to at least one and at most N. The memory may also comprise clock control logic to receive timing calibration information from the memory device and to output a signal to adjust a phase of the at least one clock based on the timing calibration information.

A portable terminal monitors a signal level of a short-range wireless signal from a wireless communication apparatus. If the signal level drops so low that a state of connection for short-range wireless communications cannot be maintained between the two apparatuses, use of predetermined functions of the portable terminal is limited. A short-range wireless communication facility of the portable terminal and the wireless communication apparatus move into a particular operation mode if communications do not occur therebetween at least for a predetermined time period. In monitoring the signal level of the wireless signal from the wireless communication apparatus in the particular operation mode, the portable terminal reduces a response speed at which to detect a signal level change. This causes the wireless communication apparatus to delay issuing a request for an increase in transmission power, thereby reducing unevenness of the working distance at which to alert a user to the unusual distance traveled between the two apparatuses or beyond which to limit the use of some functions of the portable terminal.

The present invention takes the form of a current limiting apparatus and method for limiting current flow, induced when the level of an external signal is greater than an external signal threshold signal level, in a conductive loop formed by a medical device implanted within a living organism having electrically excitable tissue. The system includes an implantable pulse generator (IPG) system having a housing, a signal generator disposed in the housing that generates an electrical signal, and at least one lead extending from the housing to convey electrical signal to the patient. To limit the induced current flow, the IPG includes current limiting componentry, an impedance increasing element, and / or alternating current blocking elements. These components provide an alternating current impedance path to the electrical ground from a lead coupled to the capacitive element. Also disclosed are techniques for reducing the effective surface area of the current inducing loop caused by the IPG system.

A device for administrating electro-muscle stimulation (EMS) includes a flexible covering having a plurality of spaced apart electrodes (22). In a preferred embodiment the flexible covering is shaped like a belt (24) and is designed to encircle and be connected around a portion of a patient's body (506). The belt is fabricated from an elastic material so that the electrodes are pressed against the skin of the patient to promote better electrical conduction. The electrodes are selectively positionable to different locations on the belt, so they may be placed directly over a selected muscle or muscle group. Each electrode has its own individual control (32) for adjusting the level of the electrical stimulation signal, so that (1) different muscles can receive different levels of stimulation, and (2) the level of stimulation may be changed during the course of treatment. A master adjustment control (504) is used to adjust the stimulation signal level applied to all the electrodes. In a preferred embodiment, the individual adjustment controls are located adjacent their respective electrodes on the belt. In accordance with another preferred embodiment of the invention, the flexible covering (423) is folded to form a pocket, and a sponge assembly (425) is removably inserted into the pocket. The sponge assembly has a plurality of replaceable sponges (429).

A radio frequency identification (RFID) based system to track consumption of medicine is disclosed. An RFID device monitors for a signal pattern indicative of an RFID tag contained within medication and determines a status based on a presence or absence of the signal pattern. The signal pattern includes a medication identifier and a signal level over time. A detected signal pattern is compared to stored ingestion profiles to distinguish between consumed and non-consumed medication.

Clock alignment circuits and techniques for reducing power dissipation, increasing power supply noise immunity, decreasing process and temperature variation sensitivity, and providing a wide operating range. A power supply generator generates an isolated supply voltage for a delay line used in a clock alignment circuit. The delay line generates a delayed clock from a reference clock. A comparator detects a correction information (i.e., delay or phase error) between the delayed clock and the reference clock and generates error information representative of the correction information. A charge pump circuit converts the error information into a voltage signal, wherein the voltage signal is a scaled representation of the error information. The power supply generator includes an amplifier having a first input coupled to the voltage signal and an output to provide the supply voltage and a capacitor coupled between the supply voltage and a ground voltage, wherein the amplifier tracks the voltage signal level to regulate the supply voltage.

A wireless signal repeater having an integrated display that concurrently displays a receive signal level, a transmit signal level, and a textual indication of signal quality, reflecting how well the repeater is currently operating to repeat wireless signals. By reference to the integrated display, a user can readily determine whether the repeater is well positioned to function as desired. And if the display indicates that the repeater is not functioning optimally, the user can then conveniently move the repeater around until the repeater reflects an acceptable level of operation.

A digital image reading system including an image sensor and a computer that is programmed to adjust the frame rate of the image sensor, and to obtain a maximum frame rate of the image sensor for obtaining an acceptable image. An algorithm for adjusting the frame rate evaluates image parameters and calculates new exposure times, gain values, and exposure settings to support a maximum frame rate of the image sensor. A process for obtaining an acceptable image with an image reader evaluates an image signal level and adjusts the frame rate if the signal level is outside of a predetermined range. The process adjusts the image sensor to run at a maximum operational frame rate. A digital image reading system including multiple separate digitizers for use in various read environments and under various read conditions.

A wireless base station device includes a wireless unit for performing wireless communications with a mobile station; a reception memory unit for storing therein reception spectrum spread data as reception data; a baseband reception unit for processing and decoding the reception data stored in the reception memory unit; a common downlink channel reception unit for receiving a downlink signal of other base station devices; a frame protocol processing unit for converting a transmission channel format; a baseband transmission unit for outputting encoded data; a spread processing unit for outputting spread-modulated data to the wireless unit; and a call controller for controlling an allocation of processing resources. Parameters including a spreading code and a transmission power required for installing the wireless base station device are automatically set by operating the common downlink channel reception unit to detect notification information and signal levels of neighboring base station devices.

The present invention relates to prioritizing special cells in cell selection in a cellular radio network. In a cellular radio network one or more cells provide a subscriber with special services or tariffs not offered to all subscribers. These cells are called subscriber's special cells. The mobile station measures an average reception level and calculates by means of them cell selection parameters on the basis of which the best cell is selected. In accordance with the invention, when the mobile station detects that the cell is one of cells of a special cell list stored in a memory, it checks first if the cell fulfils a minimum requirement of cell selection on the basis of the measured signal level. If the minimum requirement is fulfilled, the mobile station manipulates the calculation of the cell selection parameter of a special cell to the effect that the selection probability of a special cell is improved with respect to a normal cell. In a preferred embodiment of the invention, the manipulation of the calculation comprises a step of adding a predetermined margin to the measured signal level of a special cell before the cell selection parameter is calculated. This will minimize the possibility that the mobile station would accidentally be camped on a normal cell when it is within the area of a special cell.

An efficient decoding of vector signaling codes is obtained using a circuit that ranks received signal levels, designates ranked values as representing particular code elements, and translates those particular code elements into a decoded result. An optimized ranking circuit combines analog crossbar switching of signal values with comparators that provide digital results. These elements may be repetitively tiled into processing arrays capable of larger ranking operations, or iteratively applied to selected portions of the data set under control of a sequencer or controller.

A display device having a highly reliable electrostatic capacitive type touch panel which allows finger touch inputting and possesses excellent detection sensitivity is provided. With respect to X electrodes and Y electrodes which are formed on an electrostatic capacitive type touch panel, either one of the X electrodes and the Y electrodes is divided corresponding to a ratio between the number of X electrodes and the number of Y electrodes, and a floating electrode is formed in gaps formed along with the reduction of area of the electrode thus adjusting the area of the electrode. Due to the contraction of the area of the individual electrode, a noise level can be lowered more compared to lowering of a signal level and hence, an S / N ratio can be increased thus enhancing the detection sensitivity. Further, a line is branched on a flexible printed circuit board, intersecting lines are formed on a back surface of the flexible printed circuit board, and the intersecting lines are arranged to orthogonally intersect with lines formed on a front surface of the flexible printed circuit board thus lowering line capacitance.

A light sensor system includes at least one light emitter, a light sensor unit and a processing unit. The light sensor unit is arranged to receive reflected light from an object in accordance with a time sequence in which the at least one light emitter is activated, and accordingly output a plurality of reflected signals. The processing unit is arranged to receive the reflected signals, identify a signal function of time by referring to occurrence sequence of local peak levels of the reflected signals, and determine motion of the object according to the signal function of time. Another light sensor system is proposed. The major difference between the two light sensor systems is that the processing unit of the another light sensor system is arranged to identify the signal function of time by comparing a predetermined threshold with signal levels of the reflected signals.