Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
Hiro

3538 results about "Operating speed" patented technology

The operating speed of a road is the speed at which motor vehicles generally operate on that road. The precise definition of "operating speed", however, is open to debate. Some sources, such as the AASHTO, have changed their definitions recently to match the common use of the word. In 1994, the AASHTO Green Book defined the operating speed as "the highest overall speed at which a driver can travel on a given highway under favorable weather conditions and under prevailing traffic conditions without at any time exceeding the safe speed as determined by the design speed on a section-by-section basis," a definition which a majority of US states still use. In July 2001, however, the AASHTO revised their definition for the new edition of the Green Book and defined it as "the speed at which drivers are observed operating their vehicles during free-flow conditions."

Device with low-k dielectric in close proximity thereto and its method of fabrication

A semiconductor device with a low-k material in close proximity thereto and its fabrication method. The device includes a gate electrode overlying a substrate. An electrically conductive plug is provided immediately adjacent to the gate electrode and making electrical contact to the device. A low-k dielectric material is disposed in the space between the gate electrode and the electrically conductive plug whereby reducing the parasitic capacitance. Thus, higher density of devices can be formed without decreasing operating speed.
Owner:TAIWAN SEMICON MFG CO LTD

Parameter state estimation

The state estimator provides parametric estimates for operating states not readily measurable with production powertrain and driveline hardware, such as real-time torque values of axles and dampers. This facilitates implementation of torque oscillation damping control schemes which use multivariable feedback. A control parameter is estimated for a powertrain system having multiple torque-generative devices operably connected to a transmission device having a torque output to a driveline. This includes establishing a plurality of equations operable to estimate the control parameter and other operating parameters based upon torque inputs. The operating parameters comprise operating speeds of the powertrain system and driveline. The operating parameters that comprise operating speeds of the powertrain system and driveline are determined. Coefficients of the plurality of equations are adjusted based upon the operating speeds of the powertrain system.
Owner:GM GLOBAL TECH OPERATIONS LLC

More electric aircraft starter-generator multi-speed transmission system

InactiveUS20070151258A1Reduces operating speed rangeReduce speed rangeToothed gearingsGas turbine plantsStarter generatorElectric aircraft
A turbofan gas turbine propulsion engine includes a multi-speed transmission between the high pressure and low pressure turbines and associated high pressure and low pressure starter-generators. The multi-speed transmission reduces the operating speed range from the low pressure turbine to its associated starter-generator, and is configurable to allow the starter-generator associated with the low pressure turbine to supply starting torque to the engine.
Owner:HONEYWELL INT INC

Surgical tool system including plural powered handpieces and a console to which the handpieces are simultaneously attached, the console able to energize each handpiece based on data stored in a memory integral with each handpiece

A surgical tool system (30) with a powered surgical handpiece (32). A removable handswitch (39) is attached to the handpiece. The handswitch includes a slip ring (192) that removably holds the handswitch to the handpiece. A lever arm (212) is pivotally attached to the slip ring. A magnet (190) is fitted in the lever arm. The angle of the lever arm is set by the surgeon to indicate the on / off state and operating speed of the handpiece. Internal to the handpiece is a sensor (94) that generates a signal based on the relative proximity of the magnet. The sensor signal is thus employed as the control signal for regulating the operation of the handpiece. Thus a surgeon can selectively use the handpiece with or without the mounted control switch.
Owner:STRYKER CORP

Oral irrigator

The present invention is an oral irrigator comprising a pump, a discharge nozzle and a pressure control. The pump has a generally constant operating speed and feeds the discharge nozzle. The pressure control is adapted to modify a discharge pressure at the nozzle without a significant change in pump speed. The pressure control modifies a level of fluid flow restriction between the pump and the nozzle. The modification of the level of fluid flow restriction is accomplished by modifying aspects of a fluid flow path extending through the pressure control. The aspects modified include the diameter, length and / or number of direction changes of the fluid flow path.
Owner:WATER PIK INC

Gear-operated speed change apparatus for automatic transmission

A gear-operated speed change apparatus for an automatic transmission, which can make the degree of freedom for selecting a gear ratio higher than that of the case using the Ravigneaux type composite planetary gear train, while achieving a strength advantage of the gear train, an improvement in the fuel economy, coaxial positioning of the input port and output portions and size reduction of the automatic transmission altogether. The apparatus can achieve at least seven forward speeds and one reverse speed by engaging / releasing four clutches and two brakes. One of the three planetary gear sets can reduce the speed of an input rotation always or increase the input rotation always. One of the remaining two planetary gear sets is a double sun gear type planetary gear set including a third carrier having a center member positioned between two sun gears for inputting or outputting a rotation.
Owner:JATCO LTD

Portable debridement and irrigation device

A portable debridement and irrigation device includes a body structure and a disposable spray nozzle structure and spray reduction cup removably mounted thereon. A battery-powered electric pump device is in liquid transmission connection with the disposable spray nozzle device. A removable and replaceable liquid storage container which holds a sterile liquid is held within a storage container receiving chamber formed within the body structure in liquid transmission connection with the electric pump, and a pump engagement switch is operatively interposed between the battery and the electric pump for engaging and disengaging the electric pump. Finally, a pump speed control device with a limiting device for preventing it from proceeding beyond a predetermined operating setting unless the operator intentionally disengages the limiting device is operatively connected to the electric pump for adjusting the operating speed of the pump and thus the outflow speed of liquid from the spray nozzle.
Owner:DINUCCI KENT +1

Disk drive disabling BEMF detection window to reduce acoustic noise while using wedge spindle speed control

A disk drive is disclosed employing either back electromotive force (BEMF) spindle speed control mode or wedge spindle speed control mode. A BEMF detector monitors the BEMF voltage generated by the windings of the spindle motor to generate a BEMF speed error. The BEMF spindle speed control mode is used to spin up the disk to an operating speed, and the wedge spindle speed control to maintain the disk at the operating speed. While in the wedge spindle speed control mode, a BEMF detection window is disabled to reduce acoustic noise.
Owner:WESTERN DIGITAL TECH INC

Method for determining pump flow without the use of traditional sensors

A technique for determining pump flow without using traditional sensors features steps and modules for creating a calibrated power curve at closed valve conditions at several speeds; calculating coefficients from a normalized power curve based on a pump's power ratio; and solving a polynomial power equation for flow at the current operating point. The calibrated power curve may be created by increasing the speed of the pump from a minimum speed to a maximum speed and operating the pump with a closed discharge valve. This data is used to correct published performance for shutoff power and best efficiency point power at rated speed in order to determine the pump's power ratio. It is also used to accurately determine closed valve power at the current operating speed. The pump's power ratio is determined by the equation: Pratio=Pshutoff @100% / PBEP<sub2>—< / sub2>corr. The polynomial power equation may, for example, include a 3rd order polynomial equation developed using coefficients from the normalized power versus flow curve, and corrections may be made for speed, hydraulic efficiency and specific gravity in the polynomial power equation. Complex roots may be determined to solve the 3rd order polynomial equation using either Muller's method or some other suitable method, and the calculated actual flow may be determined for a specific operating point.
Owner:ITT MFG ENTERPRISES LLC

Well service pump power system and methods

A well service pump system supplies high pressure working fluid to a well. The pump system is a linear design which incorporates an electric motor, a variable frequency drive (VFD), a pump drive, closed loop variable flow rate hydraulic pumps, hydraulic ram cylinders, working fluid end cylinders, and a coupling to connect the hydraulic ram cylinders and the working fluid end cylinders. The electric motor powers the hydraulic system which, in turn, provides hydraulic fluid to operate the hydraulic ram cylinders. The VFD is connected to a single one of the hydraulic pumps at a time and applies power to the connected pump, via the pump drive, to drive the connected pump from a cold start to an operating speed. The VFD is connected sequentially, one pump at a time, to each of the hydraulic pumps and disconnected from each pump once the pump reaches the operating speed. Once the pump reaches operating speed, the pump is connected to receive power directly to the electric motor.
Owner:AMERIFORGE GRP

Method for wedge time shift calibration in a disk drive

A method is disclosed for identifying wedge time shift zones on a magnetic disk of a disk drive. The disk drive further includes a spindle motor for rotating the disk at an operating speed in response to a spindle control current generated by a spindle control system, and a head that is actuated over the disk. During operation, the control systems causes a seek of the head across the disk and measures wedge-to-wedge times between servo wedges. The control system then calculates a wedge-to-wedge time shift value using the wedge-to-wedge times and determines whether the wedge-to-wedge time shift time value exceeds a predetermined threshold. If the wedge-to-wedge time shift value exceeds the predetermined threshold, then the control system identifies a wedge time shift zone, and stores information for compensating for the identified wedge time shift zone during disk operations.
Owner:WESTERN DIGITAL TECH INC

Determination And Control Of Wellbore Fluid Level, Output Flow, And Desired Pump Operating Speed, Using A Control System For A Centrifugal Pump Disposed Within The Wellbore

ActiveUS20080067116A1Enhance market appealBroad possible marketLevel controlWind motor controlEngineeringSystem parameters
A method and apparatus for determining a fluid level and / or output flow during operation of a centrifugal pump, are provided, which may be used for production of gas and / or oil from a well, and include a vector feedback model to derive values of torque and speed from signals indicative of instantaneous current and voltage drawn by the pump motor, a pump model which derives values of the fluid flow rate and the head pressure for the pump from torque and speed inputs, a pumping system model that derives, from the estimated values of the pump operating parameters, an estimated value of fluid level and other pumping system parameters. Controllers responsive to the estimated values of the pumping system parameters control the pump to maintain fluid level at the pump input, near an optimum level, or within a safe operating range and / or output flow from the pump.
Owner:UNICO LLC

Sensorless ac motor controller

A controller for an AC electric motor, includes a Feed Forward Torque Controller and a load model. The Torque controller directly derives a torque related component of applied motor voltages from a signal representing a torque command input T* and at least one motor parameter. The load model derives a motor speed value including a model of motor speed behaviour of the AC electric motor to provide an output signal which represents the motor speed of the AC electric motor. This motor speed output signal is used in determining a frequency of rotation of an applied motor voltage vector. Where an input to the load model is the signal representing the torque command input T*, the load model uses the signal representing the torque command T*, at least over a part of an operating speed range of the AC motor which includes zero speed, to determine the motor speed output signal.
Owner:HUNTER GREGORY PETER

Mobile robot path planning method based on improvement of ant colony algorithm and particle swarm optimization

The invention discloses a mobile robot path planning method based on an improvement of an ant colony algorithm and particle swarm optimization. The method mainly solves the problems that in the prior art, the operating speed of an algorithm is low, and frequency of turning of an optimized path is high. The planning method includes the steps that modeling is carried out on a work environment of a robot; the particle swarm optimization is utilized to quickly carry out path planning, pheromones more than those around an obtained path are scattered on the obtained path, and guiding is provided for an ant colony; an ant colony algorithm optimized by the principle of inertia is adopted, and optimization is conducted on the basis of the particle swarm optimization; the motion path of the robot is output according to an optimization result. According to the planning method, comprehensive consideration is given to stability and robustness of the algorithm, iterations can be effectively reduced, searching efficiency is improved, the path length is shortened, the frequency of turning is reduced, path quality is substantially improved, and the planning method accords with an artificial planning intention and is suitable for autonomous navigation of various mobile robots in a static environment.
Owner:GUILIN UNIV OF ELECTRONIC TECH

Method for determining pump flow without the use of traditional sensors

A technique for determining pump flow without using traditional sensors features steps and modules for creating a calibrated power curve at closed valve conditions at several speeds; calculating coefficients from a normalized power curve based on a pump's power ratio; and solving a polynomial power equation for flow at the current operating point. The calibrated power curve may be created by increasing the speed of the pump from a minimum speed to a maximum speed and operating the pump with a closed discharge valve. This data is used to correct published performance for shutoff power and best efficiency point power at rated speed in order to determine the pump's power ratio. It is also used to accurately determine closed valve power at the current operating speed. The pump's power ratio is determined by the equation: Pratio=Pshutoff @100% / PBEP<sub2>—< / sub2>corr. The polynomial power equation may, for example, include a 3rd order polynomial equation developed using coefficients from the normalized power versus flow curve, and corrections may be made for speed, hydraulic efficiency and specific gravity in the polynomial power equation. Complex roots may be determined to solve the 3rd order polynomial equation using either Muller's method or some other suitable method, and the calculated actual flow may be determined for a specific operating point.
Owner:ITT MFG ENTERPRISES LLC

Scrap melter and impeller therefore

A device for submerging scrap metal includes: (a) a drive source, (b) a drive shaft having a first end and a second end, the first end being connected to the drive source, and (d) an impeller connected to the second end of the drive shaft, the impeller preferably having two or more outwardly-extending blades. Preferably, each of the blades has a portion that directs molten metal at least partially downward. The impeller design leads to lower operating speeds, lower vibration, longer component life and less maintenance. Additionally, the impeller preferably has a connective portion. The connective portion is used to connect the impeller to the shaft and preferably comprises a nonthreaded, tapered bore extending through the impeller.
Owner:COOPER PAUL V

Power plant start-up method

Ambient air is compressed into a compressed ambient gas flow and delivered to a turbine combustor. At least one of an exhaust port, a bypass conduit, or an extraction conduit is opened to vent the power plant. A turbine shaft is rotated at an ignition speed and a fuel stream is delivered to the turbine combustor for mixing with the compressed ambient gas flow to form a combustible mixture. The combustible mixture is burned and forms a recirculated gas flow that drives the turbine. The recirculated gas flow is recirculated using the recirculation loop. The turbine is operated at a target operating speed and then reaches substantially stoichiometric combustion. At least a portion of the recirculated gas flow is extracted using an extraction conduit that is fluidly connected to the turbine compressor.
Owner:GENERAL ELECTRIC CO

Method and device for detecting road traffic abnormal events in real time

The invention provides a method and device for detecting road traffic abnormal events in real time. The method includes the steps of monitoring a road, obtaining a plurality of frames of continuous monitor images, extracting bright white segments from the monitor images, obtaining lane lines and lane end points through processing, building a lane model, determining a bidirectional detection area of a lane according to the lane model, detecting a moving object in the bidirectional detection area according to a Gaussian mixture model background subtraction method, determining the position of the moving object, building the mapping relation between the moving target and an actual vehicle according to the position of the moving target in the multiple frames of continuous monitor images by the adoption of a posterior probability splitting and merging algorithm and a feature point matching and tracking method, obtaining the running track and running speed of the actual vehicle, detecting the lane model and the running track and running speed of the actual vehicle according to a prestored road traffic abnormal behavior semantic model, and judging whether the road traffic abnormal events exist or not. The method has the advantages of being intelligent, high in accuracy and the like.
Owner:TSINGHUA UNIV +1

Two mode electro-mechanical transmission and control

A two mode power-split electric hybrid system and a method of control said hybrid system. The hybrid system is comprised of an engine, a transmission, an energy storage device and a control system for effecting said control method. Said transmission is a reconfigurable power split system, comprising a power-splitting device and an output power path selecting device. The power splitting device includes a compound planetary gear system and two electric machines which form a local series electric hybrid system. Said transmission regulates the output power state of said hybrid system by controlling power flow within said local series hybrid system. The hybrid system provides at least two operating mode, an output power split mode and a compound power split mode. Said control system includes multiple controllers and control modules. In accordance with the operating conditions of the hybrid system, said control system computes and sets system power requirement, allocates ob board power resources and sets engine operating speed and torque. In addition, said control system sets the operation mode of the transmission and controls the engine speed by adjusting operating torque of electric machines, based on the differential signal between reference engine speed and actual engine speed. Said control system is also capable of controlling engine torque through engine controller.
Owner:SHANDONG LIANCHENG GREENMAX TECH

Disk drive with controlled reduced internal pressure

A rigid magnetic recording disk drive includes a vacuum pump attached to the disk drive housing for removing air from within the housing so that the disk drive is operated at a reduced internal gas pressure. The pump motor is controlled by control circuitry that receives an input signal representative of the pressure within the housing to enable the pressure to be maintained within a predetermined reduced pressure range. Because spindle motor current has been directly correlated with internal pressure, a signal representative of the spindle motor current is used as the input to the pump control circuitry. The pump control circuitry also prevents the pump from turning on until the spindle motor has reached its stable operating speed, and from turning on when the disk drive is reading or writing data. Because of the reduced internal pressure the disk drive operates at a significantly higher disk RPM with only a minimal increase in power consumption and without any increase in track misregistration.
Owner:HITACHI GLOBAL STORAGE TECH NETHERLANDS BV

Single-chip microcomputer

Flash ROMs operate at a speed slower than that of a CPU. In order to raise the operating speed of a single-chip microcomputer, therefore, interleaving is adopted and a plurality of flash ROMs are operated alternately to obtain an apparent operating speed equivalent to that of a CPU. Read clock generating circuits are placed in close proximity to clock input pins of respective ones of the flash ROMs and supply the flash ROMs with read clocks obtained by dividing down the frequency of a system clock. Delay ascribable to wiring is eliminated from the read clocks as a result.
Owner:RENESAS ELECTRONICS CORP
Who we serve
  • R&D Engineer
  • R&D Manager
  • IP Professional
Why Eureka
  • Industry Leading Data Capabilities
  • Powerful AI technology
  • Patent DNA Extraction
Social media
Eureka Blog
Learn More
PatSnap group products