125 results about "Populated area" patented technology

A system, method and computer program product provides for power line communications (PLC) over electric power lines includes a device mountable near an electrical distribution transformer (DT) to provide a high speed interface and communicates with one or multiple access devices, which provide low speed interfaces for analog signals or digital signals over RS 232, RS 485, optical, wireless and Ethernet. The device transmits data to / from these access devices over the electric lines to other repeaters over one or more wires of an electrical line or over multiple lines, and serves to strengthen and improve signal quality. Upon detecting a wire or line is having problems carrying data, the data is sent over other wires, and upon power line failures, wireless backup to mobile / GSM and WiMax networks is utilized. The device permits utilities and others to read electric meters, monitor the power quality of the distribution grid and detect power losses / failures / outages, and permits telecom service providers and others to provide a communications link to cell phone towers, WiFi Access Points and enable broadband Internet and telephony in rural, remote or sparely populated areas.

Location information provided by multiple positioning systems is combined to provide an estimated user location. In performing the combination, location information provided by the positioning system that is currently deemed more reliable is provided greater weight than the location information provided from the other positioning system(s). Alternatively, one of multiple positioning systems is selected to calculate an estimated user location. The selected system is the one that is currently deemed more reliable based on some indicia of reliability. Using either approach, an accurate estimate of a user's location can be provided both in rural areas or other sparsely-populated areas as well as in urban areas or other areas prone to high multipath effects.

A Mixer / Ejector Wind Turbine (“MEWT”) system is disclosed which routinely exceeds the efficiencies of prior wind turbines. In the preferred embodiment, Applicants' MEWT incorporates advanced flow mixing technology, single and multi-stage ejector technology, aircraft and propulsion aerodynamics and noise abatement technologies in a unique manner to fluid-dynamically improve the operational effectiveness and efficiency of wind turbines, so that its operating efficiency routinely exceeds the Betz limit. Applicants' preferred MEWT embodiment comprises: an aerodynamically contoured turbine shroud with an inlet; a ring of stator vanes; a ring of rotating blades (i.e., an impeller) in line with the stator vanes; and a mixer / ejector pump to increase the flow volume through the turbine while rapidly mixing the low energy turbine exit flow with high energy bypass wind flow. The MEWT can produce three or more time the power of its un-shrouded counterparts for the same frontal area, and can increase the productivity of wind farms by a factor of two or more. The same MEWT is safer and quieter providing improved wind turbine options for populated areas.

Product ICs / wafers include additional diagnostic, test, or monitoring structures opportunistically placed in filler cell positions, within tap cells, within decap cells, within scribe line areas, and / or within dummy fill regions. Improved fabrication processes utilize data from such structure(s) in wafer disposition decisions, rework decisions, process control, yield learning, or fault diagnosis.

A method and apparatus for monitoring an endoscopic examination are provided in an embodiment of the present application, wherein each key frame of a medical image acquired by a gastrointestinal endoscope is recognized by depth learning technology, an image recognition result and a first examination score are obtained, then, according to the image recognition result, the key frames with the digestive system viscera anatomy part as the target part are taken as digestive endoscopic images, and each digestive endoscopic image is filled in the image filling frame of the corresponding target part in the pre-configured image filling area, and the number of unfilled image filling frames is counted to generate the second examination score; then, each filled digestive endoscopic image is analyzed and recognized by image analysis, and a third examination score is generated according to the result of image analysis and recognition, and finally, an endoscopic examination monitoring result is generated according to the first examination score, the second examination score and the third examination score. Thus, the intelligent quality control can help the operator to complete the endoscopic operation better and improve the detection rate of lesions.

A Mixer / Ejector Wind Turbine (“MEWT”) system is disclosed which routinely exceeds the efficiencies of prior wind turbines. In the preferred embodiment, Applicants' MEWT incorporates advanced flow mixing technology, ejector technology, aircraft and propulsion aerodynamics and noise abatement technologies in a unique manner to fluid-dynamically improve the operational effectiveness and efficiency of prior wind turbines, so that its operating efficiency routinely exceeds the Betz limit. Applicants' preferred MEWT embodiment comprises: a turbine shroud with a flared inlet; a ring of stator vanes; a ring of rotating blades (i.e., an impeller) in line with the stator vanes; and a mixer / ejector pump to increase the flow volume through the turbine while rapidly mixing the low energy turbine exit flow with high energy bypass wind flow. Unlike gas turbine mixers and ejectors which also mix with hot core exhaust gases, Applicants' preferred apparatus mixes only two air streams (i.e., wind): a primary air stream which rotates, and transfers energy to, the impeller while passing through the turbine; and a high energy bypass flow or “secondary” air stream which is entrained into the ejector, where the secondary air stream mixes with, and transfers energy to, the primary air stream. The MEWT can produce three or more time the power of its un-shrouded counterparts for the same frontal area, and can increase the productivity of wind farms by a factor of two or more. The same MEWT is safer and quieter providing improved wind turbine options for populated areas.

A method and system for preventing the control of an aircraft from the cockpit. In an exemplary embodiment, the system could be triggered externally. For example, an air traffic control (ATC) station could determine that the aircraft has deviated from its planned flight path. If personnel at the ATC station decide that the deviation is not attributable to the actions of the authorized flight crew, the personnel can transmit a signal to the aircraft that disables all normal cockpit control of the aircraft. Once normal flight controls are disabled, the aircraft may execute a preprogrammed emergency flight plan via its autopilot system, with or without the use of a flight management system (FMS). The emergency flight plan could cause the aircraft to fly to a sparsely populated area and enter a holding pattern, or it could cause the aircraft to land in a sparsely populated area or at an airport using an autoland system.

A method, an apparatus and an article of manufacture for estimating risk of impact of a natural disaster on a populated area. The method includes using dynamic natural disaster modeling information to estimate a spatio-temporal distribution of a parameter of a potential natural disaster, wherein the modeling information is input to an instance of a weather forecast model which computes simulation results for natural disaster parameters for an area at a given time interval and the results produced on each time step within the time interval the estimate of the spatio-temporal distribution, and using static demographic data to estimate risk of impact of the parameter of the natural disaster on a populated area based on the estimated spatio-temporal distribution, wherein the demographic data is overlayed with the estimated spatio-temporal distribution via applying a weight to each populated area based on historical natural disaster incidents and related impact for each area.

A waste water treatment system is provided that includes a basin for holding water; nitrifying and denitrifying bacteria; macroalgae; and a biobed having a at least one layer and being constructed of materials selected to provide sufficient level of pH for enabling bacterial growth. In the biobed de-nitrification and nitrification bacterial processes are separated. Oxygen produced by algae is used by the nitrifying bacteria. Water is provided continuously to the biobed at an inlet and exits the system downstream after having gone through the biobed. The system may be used with waste water in water treatment plants, domestic waste water (sewage), waste water from diverse industries, drain water from waste deposits, runoff water from roads, water waste treatment and recycling plants, agricultural and farm land and surrounding land of populated areas. The algae and bacteria are combined for symbiotic remediation of water that may be flexibly controlled to adapt to a broad range of applications.

Rotor blades for wind power installations are known in many different forms. In a wind power installation the rotors or the rotor blades thereof represent the main source of sound. For reasons relating to acceptance and noise prevention laws, the aim should / must be that of minimizing the levels of sound emission as wind power installations are often also set up in the proximity of residential accommodation. The levels of sound emission which hitherto occur with a wind power installation or a wind power converter also mean that wind power installations are faced with resistance from populated areas because of the sound they produce and for that reason such installations can be accepted sometimes with difficulty or not at all as authorities responsible for planning permission refuse permission for wind power installations because of the existing environmental requirements, noise also being an environmentally polluting factor. Therefore the object of the invention is further to improve the noise emission of wind power installations. Wind power installation rotor blade comprising means for reducing the sound produced by a rotor blade, wherein the means is formed by a fluid-repellent layer and / or surface which is provided at least on a surface portion of the rotor blade.

The invention discloses a rapid simulation method of leakage of a high-sulfur natural gas gathering and transportation device for a marine gas field. Through analysis of leakage and diffusion distribution laws of high-sulfur natural gas in a densely populated area and optimization of a Gaussian diffusion model parameter selection method, a leakage and diffusion simulation procedure for sulfur-containing natural gas in a gathering and transportation pipeline and natural gas contained in a desulfurization device in a purification plant is acquired, and the gas leakage and diffusion result is rapidly simulated. A Gaussian model is selected, the influences of the ground roughness, the atmospheric stability and the leakage amount on gas leakage and diffusion are sufficiently considered, related parameters are corrected in combination with surroundings of a well field, the leakage and diffusion result under the four conditions of leakage of a sulfur-containing natural gas gathering and transportation pipeline, leakage of hydrogen-sulfide-containing pregnant solutions of the desulfurization device in the purification plant, leakage of hydrogen-sulfide-containing pregnant solutions of pipelines and gas leakage of pipelines of a station is rapidly and quantitatively simulated, and the longest distance that hydrogen sulfide with the concentration being 100 ppm and 1,000 ppm can reach after leakage and diffusion is obtained.

Rapid Disinfection System that is able to disinfect the surfaces of a Rescue Ambulance Patient Cabin after all necessary hand disinfection protocols have been completed. As with emergency situations timing is critical. This system can disinfect the patient cabin rapidly within minutes with very little operator effort. This will allow for little to no down time of the rescue ambulance. Larger populated areas may have as much as 50,000 emergency calls in a months' time and may only have 20 to 30 rescue ambulance to handle all of these calls. In these areas there may only be less than 5 minutes surface disinfection times available.

A Mixer / Ejector Wind Turbine (“MEWT”) system is disclosed which routinely exceeds the efficiencies of prior wind turbines. Unique ejector concepts are used to fluid-dynamically improve many operational characteristics of conventional wind turbines for potential power generation improvements of 50% and above. Applicants' preferred MEWT embodiment comprises: an aerodynamically contoured turbine shroud with an inlet; a ring of stator vanes; a ring of rotating blades (i.e., an impeller) in line with the stator vanes; and a mixer / ejector pump to increase the flow volume through the turbine while rapidly mixing the low energy turbine exit flow with high energy bypass fluid flow. The MEWT can produce three or more time the power of its un-shrouded counterparts for the same frontal area, and can increase the productivity of wind farms by a factor of two or more. The same MEWT is safer and quieter providing improved wind turbine options for populated areas.

The invention discloses a dynamic risk evaluation method for road dangerous cargo transportation on the basis of the Internet of Things. The method comprises the following steps that: on the basis ofthe Internet of Things technology, collecting a dynamic parameter which influences a transportation risk; on the basis of the dynamic parameter, determining and correcting a transportation accident probability; determining an accident damage range, and calculating exposed populations on the basis of the dynamic parameter; on the basis of the dynamic parameter, dynamically evaluating driver safetyand the technical situation of the vehicle, and evaluating an enterprise management level according to an evaluation result so as to carry out associated offset on the transportation risk; on the basis of a vehicle speed parameter, establishing a traffic volume estimation model and a real-time estimation model for the population exposure of a high populated area; and finally, establishing a dynamic transportation risk evaluation model. By use of the method, the quantitative impact of the dynamic parameter which can be obtained in a transportation process on the transportation risk can be fullyconsidered, meanwhile, the method disclosed by the invention evaluates the transportation risk value in real time on the basis of the Internet of Things technology, can be used for transportation route selection and risk early warning, and improves the management level of dangerous cargo transportation.

A well system that intersects a subterranean formation, and which includes a motherbore disposed in a non-producing formation that is between producing zones. Connate fluids in the formation can be produced with the well system; alternatively, fluids can be injected into the formation through the well system. Lateral wellbores extend from the motherbore to depths that are both deeper and shallower than the motherbore. Flow to / from each lateral wellbore can be controlled by an inflow control valve. Wellhead assemblies mounted over an opening of the well system can be at a location that is spaced away from a populated area and far away from the hydrocarbon formation.

A computer system identifies one or more regions in a digital image that includes a human face and digitally defining a combined padded region comprising one or more of the individual padded regions that overlap. A minimum overlap amount can also be set as a trigger as well as social relationships between persons whose faces are identified in order to be included in a combined region.

The invention discloses a three-dimensional printing variable-filling method based on contour features. The method comprises the following steps of establishing a three-dimensional model in an STL format; importing the three-dimensional model into slicing software and carrying out layered slicing on the three-dimensional model through the slicing software to form the section contour information ofeach layer of the three-dimensional model; dividing a slicing layer filling area into a solid filling area adopting low-filling-rate printing and a non-solid filling area adopting high-filling-rate printing, and setting the parameter value of the non-solid filling area of the model; traversing the slicing area of each layer step by step and layer by layer, and judging whether a non-solid fillingarea exists in the slicing area of each layer or not; if yes, constructing the non-solid filling areas according to types according to the contour features of the slicing areas, and forming a master non-solid filling area in a combined mode; printing the constructed master non-solid filling area layer by layer with a high filling rate, and printing the solid filling areas with a low filling rate.By means of the three-dimensional printing variable-filling method based on the contour features, the forming time is effectively shortened, and the structure strength is ensured.

The invention provides an aircraft flight attitude visual image recognition method comprising the steps that an aircraft flight real-time image or an offline single frame / sequence image is acquired toact as an input image, and the image is denoised by using adaptive median filtering; the denoised image is binarized by using by using a moving mean adaptive threshold method; the foreground is processed by using morphological operation and the holes of the area are filled so as to acquire each connected area, and preliminary screening is performed according to the aircraft feature similarity index so as to acquire a suspected target set; the concave angle points and the convex angle points of each target in the suspected target set are detected by using the multi-scale interior angle point operator, and the concave and convex angle points of each target are connected so as to form the contour of each target; the multi-feature fusion matching index is established according to the contourfeatures of the target to be detected, and the contour of the aircraft to be detected is recognized from the suspected target set by using the index; the angle code template image most similar to thecontour of the target aircraft is acquired from a simulation template library by using the local predictive searching and template matching strategy; and the flight attitude parameters of the currentframe of aircraft are solved from the matched angle code image.

The invention provides an anti-peeping method and device for a display interface, a storage medium and a terminal device. The method includes the steps of in response to startup of an application in the display interface, turning on a front-mounted camera to obtain an image; obtaining positions of the human face pupils in a preset visual area according to the obtained image; according to the obtained positions of the human face pupils, determining whether or not a user corresponding to the human face pupils is a user who peeps a screen; when the user corresponding to the human face pupils is the user who peeps the screen, determining whether or not changes of the human face corresponding to the human face pupils meet peeping standards; if yes, determining that there is a peeping behavior;if not, determining that there is no peeping behaviors; when it is determined that there is a peeping behavior, controlling the application to be displayed in an anti-peeping mode. By adopting the anti-peeping method and device for the display interface, the storage medium and the terminal device, the accuracy of discriminating the peeping behaviors in a densely populated area is effectively improved, and the probability of misjudgment is decreased.

An improved plasma arc waste processing system has a crucible formed in a horizontally elongated shape with a low-ceiling-height plenum space above a melt pool and a waste input feed arranged sideways into the crucible. The plenum space conducts the off-gases through a channel into a horizontally adjacent, thermal resonant chamber. The combined volume of the plenum space and thermal resonant chamber provides a high ratio of plenum volume to surface area of melt pool for efficient pyrolization of waste at high throughput rates. The crucible and other system components can be arranged in standard sized cargo containers, to be modularly transported and assembled in populated areas or transported to and from remote areas, such as in medical crisis zones, military deployments, and war zones. As a further improvement, a water injector is used to inject water into the plasma field to remove excess carbon and form useful gas byrpoducts.

A wireless communication network can reliably deliver high priority broadcast information from base stations to mobile terminals located deep in building and those located in scarcely populated areas that are remote from the base stations. Each of the base stations of the wireless communication network comprises a broadcast information input unit for receiving high priority broadcast information and a transmission power changing unit for changing the transmission power of the downlink common channel when high priority broadcast information is input to it. As broadcast information is input, the transmission power changing unit changes the transmission power of the downlink common channel so as to boost the effective radiation power used by the downlink common channel of the base station at places in the coverage of the base station that are subjected to a propagation loss. The effective radiation power to the mobile terminals located at places in the coverage of the base station that are subjected to propagation loss is boosted to raise the reception level of the mobile terminals located at such places.

A wireless communication system useful in assisting and locating users of mobile communication units (MUs) with emergency situations. In one embodiment, the system includes position determining equipment (PDE) to generate position data information related to receiving an emergency call request, wherein some of the PDEs are associated with a first wireless carrier and others associated with a second carrier; and a mobile positioning center (MPC) adapted to determine an approximate location of an emergency-calling MU from the position data information received from the PDEs. In another embodiment, the system includes PDEs, wherein at least one is a standalone PDE; and an MPC. In another embodiment, the system includes a mobile switching center (MSC), bases stations restricted to emergency use only, and PDEs associated respectively with the base stations. In another embodiment, the system includes PDEs adapted to transmit position data information to an MPC via a wireless medium.

The invention relates to an automatic obtaining method of a deep learning sample library corresponding to remote sensing image land type identification, and belongs to the technical field of remote sensing monitoring technologies of land utilization. a present land utilization situation vector graph and a remote sensing image are superposed in the same coordinate system, a point with a relativelylow gradient value is set in a threshold marking remote sensing image and serves as a marking point; the marking point is filled in a submersible way, and a mask layer corresponding to each filling area is assigned, and land type information is stored; and images after segmentation are extracted according to the mask layer, and are stored in a classified way according to land type information of the present land utilization situation stored by the mask layer, and the sample library is formed. The present land utilization situation data and the remote sensing data in the same time phase are superposed and compared to collect the remote sensing image characteristic library corresponding to different land types automatically, and compared with traditional manual sample obtaining which is large in workload and hard to obtain sample areas, the method of the invention is rapider and more accurate, and the labor cost is reduced substantially.

The invention discloses a vertical-shaft lift-drag coupled wind turbine for wind power generation. The upper surface of the center of a foundation platform is provided with a vertical shaft; the upper part of the vertical shaft is provided with two bearings; a space between the two bearings is 1 / 3 of the height of a blade; bearing covers cover the two bearings; an outer ring of the each bearing is matched with an inner hole of each bearing cover; a plurality of blades are uniformly distributed along the axial direction of the vertical shaft; each blade is connected with each bearing cover through a support rod to form a wind wheel; each blade has a hollow structure with upper and lower caps; and the upper and lower caps are connected with a movable grid. The vertical-shaft lift-drag coupled wind turbine is reasonable in structure, overcomes defects that a lift type wind turbine cannot be started at a low wind speed and a drag type wind turbine has low wind energy conversion efficiency, solves the problem that a vertical-shaft wind driven generator is not suitable for cities with insufficient wind resources and populated areas with complicated wind conditions, and can greatly improve the wind energy utilization rate of China and promote the development of the wind power industry.

The invention discloses a network capacity expanding method, device and system. The method comprises the steps that a robot which carries a mobile base station receives a capacity expanding instruction which is sent by a server and is used for expanding a specified region; the robot moves to the specified region; and the robot starts the mobile base station, and carries out the capacity expandingof the wireless network of the specified region. The method solves a technical problem that the wireless communication is limited in the prior art that a base station cannot be built in a densely populated area.