1091results about "Counting chain pulse counters" patented technology

A digital wavetable audio synthesizer is described. The synthesizer can generate up to 32 high-quality audio digital signals or voices, including delay-based effects, at either a 44.1 KHz sample rate or at sample rates compatible with a prior art wavetable synthesizer. The synthesizer includes an address generator which has several modes of addressing wavetable data. The address generator's addressing rate controls the pitch of the synthesizer's output signal. The synthesizer performs a 10-bit interpolation, using the wavetable data addressed by the address generator, to interpolate additional data samples. When the address generator loops through a block of data, the signal path interpolates between the data at the end and start addresses of the block of data to prevent discontinuities in the generated signal. A synthesizer volume generator, which has several modes of controlling the volume, adds envelope, right offset, left offset, and effects volume to the data. The data can be placed in one of sixteen fixed stereo pan positions, or left and right offsets can be programmed to place the data anywhere in the stereo field. The left and right offset values can also be programmed to control the overall volume. Zipper noise is prevented by controlling the volume increment. A synthesizer LFO generator can add LFO variation to: (i) the wavetable data addressing rate, for creating a vibrato effect; and (ii) a voice's volume, for creating a tremolo effect. Generated data to be output from the synthesizer is stored in left and right accumulators. However, when creating delay-based effects, data is stored in one of several effects accumulators. This data is then written to a wavetable. The difference between the wavetable write and read addresses for this data provides a delay for echo and reverb effects. LFO variations added to the read address create chorus and flange effects. The volume of the delay-based effects data can be attenuated to provide volume decay for an echo effect. After the delay-based effects processing, the data can be provided with left and right offset volume components which determine how much of the effect is heard and its stereo position. The data is then stored in the left and right accumulators.

A dual-injection locked frequency dividing circuit is proposed, which is designed for integration to a gigahertz signal processing circuit system for providing a frequency dividing function to gigahertz signals. The proposed circuit architecture is characterized by the provision of a dual-injection interface module on the input end for dividing the input signal into two parts for use as two injection signals, wherein the first injection signal is rendered in the form of a voltage signal and injected through a direct injection manner to the internal oscillation circuitry, while the second injection signal is rendered in the form of an electrical current and injected through a resonant circuit to the internal oscillation circuitry. This feature allow the proposed frequency dividing circuit to have broad frequency locking range and low power consumption.

A phase lock loop (PLL) for controlling a sampling clock or other clock, and a data sampling circuit, transceiver, or other device including such a PLL. The PLL includes a multi-range VCO, at least one fine control loop for controlling the VCO, and a coarse control loop for controlling the VCO by changing its frequency-voltage characteristic. The coarse control loop includes a frequency lock detector and voltage range monitoring logic. Typically, the frequency lock detector locks operation of the coarse control loop when the difference between the VCO output clock frequency and a reference frequency decreases to within a predetermined threshold, and the unlocked coarse control loop employs the voltage range monitoring logic to change the VCO frequency-voltage characteristic when the VCO's fine control voltage leaves a predetermined range. Other aspects are a transceiver (including at least two receiver interfaces and a transmitter interface) implementing a clocking scheme employing no more than three PLLs for clock generation, and a transceiver having a multi-layered receiver interface including digital circuitry and a single clock-generating PLL (an analog PLL for generating a multiphase clock to be shared by all layers of the receiver interface). Each receiver interface layer performs blind oversampling on a different received signal using the multiphase clock and the digital circuitry includes multilayered digital phase lock loop circuitry which receives the oversampled data.

A method and circuit are disclosed for measuring temperature. An exemplary embodiment of the present invention includes a first oscillator circuit that generates a first signal having a frequency that is dependent upon a sensed temperature. Difference circuitry determines a difference in frequency between the first signal and the second signal having a frequency that is substantially independent of temperature, and generates a difference signal having a number of pulses thereon based upon the difference. A counter circuit is responsive to the difference circuitry for offsetting a predetermined temperature level based upon the pulses appearing on the difference signal, to obtain an output signal indicative of the sensed temperature.

A signal generator circuit includes a controller adapted to generate a divide value in accordance with at least a first control signal, and a divider adapted to divide an output signal of the signal generator circuit by the divisor value. The controller is selectively operable in at least one of a plurality of modes in accordance with at least a second control signal. The controller is configured to calculate each of one or more new divide values so as to vary a frequency of the output signal in accordance with at least one of the first and second control signals. The controller is configured to switch between operational modes and / or switch between divide values, the switching between operational modes and / or divide values being performed in such a manner so as to substantially eliminate discontinuities in the frequency of the output signal.

A clock generation system for generating a first-, a second-, and a third-reference frequency clocks having respective frequencies having predetermined ratios to the reference frequency of a reference clock, using PL circuits in such a way that the clocks have sufficient S / N ratios in spite of the S / N ratio limitation by the noise floor. A first reference frequency clock is supplied to a first PLL circuit to generate an intermediate-frequency clock having an intermediate frequency having a predetermined ratio to the reference clock. The intermediate-frequency clock is supplied to a second and a third PLL circuits to generate a second and a third reference frequency clocks having frequencies respectively having a second and a third ratios to the intermediate frequency, respectively.

A direct digital frequency synthesizer having a multi-modulus divider, a numerically controlled oscillator and a programmable delay generator. The multi-modulus divider receives an input clock having an input pulse frequency fosc and outputs some integer fraction of those pulses at an instantaneous frequency fVp that is some integer fraction (1 / P) of the input frequency. The multi-modulus divider selects between at least two ratios of P (1 / P or 1 / P+1) in response to a signal from the numerically controlled oscillator. The numerically controlled oscillator receives a value which is the accumulator increment (i.e. the number of divided pulse edges) required before an overflow occurs that causes the multi-modulus divider to change divider ratios in response to receiving an overflow signal. The numerically controlled oscillator also outputs both the overflow signal and a delay signal to the delay generator that further controls the frequency of the multi-modulus divider output signal (Vp) to provide an output signal (VD) with an fout that has improved phase and timing jitter performance over prior art direct digital frequency synthesizer architectures.

A power supply is provided. The power supply is comprised of a first power module, a second power module, and a controller. The first power module is capable of delivering a first preselected amount of power. The second power module is capable of delivering a second preselected amount of power. The first and second power modules are coupled together to be capable of delivering an aggregate amount of power related to the first and second preselected amounts of power. The controller is adapted to selectively enable the first and second power modules to make power available in one of the first preselected amount, the second preselected amount, and the aggregate amount.

A distributed charge pump system uses a delay element and frequency dividers to generate out of phase pump clock signals that drive different charge pumps, to offset peak current clock edges for each charge pump and thereby reduce overall peak power. Clock signal division and phase offset may be extended to multiple levels for further smoothing of the pump clock signal transitions. A dual frequency divider may be used which receives the clock signal and its complement, and generates two divided signals that are 90° out of phase. In an illustrative embodiment the clock generator comprises a variable-frequency clock source, and a voltage regulator senses an output voltage of the charge pumps, generates a reference voltage based on a currently selected frequency of the variable-frequency clock source, and temporarily disables the charge pumps (by turning off local pump clocks) when the output voltage is greater than the reference voltage.

Circuits and methods are provided for implementing programmable sub-integer N frequency dividers for use in, e.g., frequency synthesizer applications, providing glitch free outputs signals with minimal fractional spurs. Phase-rotating sub-integer N frequency dividers are programmable to provide multi-modulus division with a wide range of arbitrary sub-integer division ratios.

An apparatus, system and method are provided for low-latency start-up of a free-running harmonic oscillator. The exemplary apparatus embodiment comprises a first and second current sources to generate first and second currents; a bias current monitor adapted to detect a magnitude of the second current and to provide a control signal when the magnitude of the second current is equal to or greater than a predetermined magnitude; and a bias controller adapted to switch the first current from the oscillator and to switch the second current to the oscillator in response to the control signal. a reference voltage generator, a comparator, and a bias controller. Exemplary embodiments include reference voltage generator, a comparator, and a bias controller.

A method of encrypting a data unit, the method comprising the steps of dividing the data unit into a series of data blocks, and for each data block, applying a block cipher function to a data block counter value to generate an encrypted block counter value, performing a logical operation to combine the encrypted block counter with the data block, and applying a block cipher function to the combined data.

A digital wavetable audio synthesizer is described. A synthesizer volume generator, which has several modes of controlling the volume, adds envelope, right offset, left offset, and effects volume to the data. The data can be placed in one of sixteen fixed stereo pan positions, or left and right offsets can be programmed to place the data anywhere in the stereo field. The left and right offset values can also be programmed to control the overall volume. Zipper noise is prevented by controlling the volume increment. A synthesizer LFO generator can ad LFO variation to: (i) the wavetable data addressing rate, for creating a vibrato effect; and (ii) a voice's volume, for creating a tremolo effect. Generated data to be output from the synthesizer is stored in left and right accumulators. However, when creating delay-based effects, data is stored in one of several effects accumulators. This data is then written to a wavetable. The difference between the wavetable write and read addresses for this data provides a delay for echo and reverb effects. LFO variations added to the read address create a chorus and flange effects. The volume of the delay-based effects data can be attenuated to provide volume decay for an echo effect. After the delay-based effects processing, the data can be provided with left and right offset volume components which determine how much of the effect is heard and its stereo position. The data is then stored in the left and right accumulators.

The provided fractional frequency divider includes a divider controlling unit for generating a divider selection signal in response to a dual-edge triggering of an input signal and a frequency dividing unit coupled to the divider controlling unit for dividing the frequency of the input signal by one of an integer and a fractional dividers in response to the dual-edge triggering and the divider selection signal to generate the output signal of the fractional frequency divider. An operation of the frequency dividing unit is not suppressed when the integer divider is employed, the operation of the frequency dividing unit is not suppressed for a period of the input signal and is suppressed for half of that period, and this cycle is kept on recurring when the fractional divider is employed. The fractional-n PLL having the fractional frequency divider is also provided.