6100 results about "Data rate" patented technology

A waveform adaptive transmitter that conditions and / or modulates the phase, frequency, bandwidth, amplitude and / or attenuation of ultra-wideband (UWB) pulses. The transmitter confines or band-limits UWB signals within spectral limits for use in communication, positioning, and / or radar applications. One embodiment comprises a low-level UWB source (e.g., an impulse generator or time-gated oscillator (fixed or voltage-controlled)), a waveform adapter (e.g., digital or analog filter, pulse shaper, and / or voltage variable attenuator), a power amplifier, and an antenna to radiate a band-limited and / or modulated UWB or wideband signals. In a special case where the oscillator has zero frequency and outputs a DC bias, a low-level impulse generator impulse-excites a bandpass filter to produce an UWB signal having an adjustable center frequency and desired bandwidth based on a characteristic of the filter. In another embodiment, a low-level impulse signal is approximated by a time-gated continuous-wave oscillator to produce an extremely wide bandwidth pulse with deterministic center frequency and bandwidth characteristics. The UWB signal may be modulated to carry multi-megabit per second digital data, or may be used in object detection or for ranging applications. Activation of the power amplifier may be time-gated in cadence with the UWB source thereby to reduce inter-pulse power consumption. The UWB transmitter is capable of extremely high pulse repetition frequencies (PRFs) and data rates in the hundreds of megabits per second or more, frequency agility on a pulse-to-pulse basis allowing frequency hopping if desired, and extensibility from below HF to millimeter wave frequencies.

An adaptable orthogonal frequency-division multiplexing system (OFDM) that uses a multiple input multiple output (MIMO) to having OFDM signals transmitted either in accordance with time diversity to reducing signal fading or in accordance with spatial diversity to increase the data rate. Sub-carriers are classified for spatial diversity transmission or for time diversity transmission based on the result of a comparison between threshold values and at least one of three criteria. The criteria includes a calculation of a smallest eigen value of a frequency channel response matrix and a smallest element of a diagonal of the matrix and a ratio of the largest and smallest eigen values of the matrix.

In a wireless communication network providing voice and data services, one or more entities in the network, such as a base station controller and / or radio base station, can be configured to reduce data services overhead responsive to detecting a congestion condition, thereby increasing the availability of one or more network resources for voice services. In one or more exemplary embodiments, one or more current data services users are targeted for modification of their ongoing data services to effect the reduction in data services overhead. Modifications can include, but are not limited to, any one or more of the following: forward or reverse link data rate reductions, and shifting of forward or reverse link traffic from dedicated user channels to shared user channels. Targeting of users for service modification can be based on reported channel quality information. For example, users reporting poor radio conditions can be targeted first for service modifications.

A system and method are disclosed for the management of WLANs in cases where unmanaged access points are present as well as with the addition or removal of access points. The disclosed system and method use signal data and network traffic statistics collected by mobile units to determine optimal configuration settings for the access points. The access point settings so managed can include the operating channel or center frequency, orthogonal signal coding used (optionally including the data rate), if any, and the transmission power. The solutions computed can account for the inherent trade-offs between wireless network coverage area and mutual interference that may arises when two or more access points use the same or overlapping frequency bands or channels and the same or similar signal coding.

A method of billing a variable bit rate communication between a first terminal and a distant terminal to a broadband subscriber permits changing billing parameters during a call in real time in response to user inputs including user requested changes in quality of service, changes in data rate and changes in preferred service provider. A variable bit rate communication to be billed has a variable quality of service related to the degree of utilization of a plurality of different networks. The billing method comprises the steps of i.) receiving user identification data at a first terminal and data representing a required bit rate and a default quality of service selected by the user, ii.) verifying the user identification data to be associated with the broadband service subscriber, iii.) determining least cost alternative network resources available for achieving the communication at the user selected default quality of service and the required bit rate, iv.) determining cost data associated with the network resources, v.) outputting to the user a least cost for the communication according to their selected default quality of service and alternative least cost network resources, vi.) coupling the first terminal and the distant terminal via the least cost determined network resources at the default quality of service and the required bit rate responsive to user authorization and vii.) billing for the communication at the default quality of service and according to the required bit rate after the termination of the communication.

Methods and systems are described for a storage system including at least two controllers configured to handle write requests and a non-volatile cache connected to both controllers that stores data received from the controllers. The non-volatile cache is accessible by the first and second controllers using an interface technology permitting two or more communication paths between a particular active controller and the non-volatile cache to be aggregated to form a higher data rate communication path. Additionally, a plurality of storage devices are each connected using the interface technology to each controller for storing data received from the controllers.

A communications network comprising a wireless local area network includes a plurality of access points connected to a host computer and each other, and a plurality of mobile units with each mobile unit being arranged for association with at least one access point. The mobile units are arranged to periodically scan for and identify the most eligible access point for association at the highest data rate on the basis of a performance criteria at the current data rate.

Apparatus and method for wireless near-field magnetic communication (NFMC) of information (e.g., voice or data) over modest distances (centimeters to a few kilometers). The transmission can proceed from an inductive coil transmitter to a magneto-electric (ME) receiving device, or between two ME devices. Electrical power may also be transmitted from and / or received using the same device. In one case, power and data are transmitted from an induction coil to a distant ME device that collects power and transmits data back to the power-transmission coil. In another case, the wireless transfer of data can be carried out between two ME devices. ME devices can be engineered to transmit or receive data and to receive electric power over a variety of frequencies by changing their dimensions, their material makeup and configuration, electrode configurations, and / or their resonance modes (longitudinal, transversal, bending, shear etc). Data rates up to and above several kilo-bits / s are possible using these methods with no limits on the frequency and duration of the communication.

A data-modulated ultra wideband transmitter that modulates the phase, frequency, bandwidth, amplitude and / or attenuation of ultra-wideband (UWB) pulses. The transmitter confines or band-limits UWB signals within spectral limits for use in communication, positioning, and / or radar applications. One embodiment comprises a low-level UWB source (e.g., an impulse generator or time-gated oscillator (fixed or voltage-controlled)), a waveform adapter (e.g., digital or analog filter, pulse shaper, and / or voltage variable attenuator), a power amplifier, and an antenna to radiate a band-limited and / or modulated UWB or wideband signals. In a special case where the oscillator has zero frequency and outputs a DC bias, a low-level impulse generator impulse-excites a bandpass filter to produce an UWB signal having an adjustable center frequency and desired bandwidth based on a characteristic of the filter. In another embodiment, a low-level impulse signal is approximated by a time-gated continuous-wave oscillator to produce an extremely wide bandwidth pulse with deterministic center frequency and bandwidth characteristics. The UWB signal may be modulated to carry multi-megabit per second digital data, or may be used in object detection or for ranging applications. Activation of the power amplifier may be time-gated in cadence with the UWB source thereby to reduce inter-pulse power consumption. The UWB transmitter is capable of extremely high pulse repetition frequencies (PRFs) and data rates in the hundreds of megabits per second or more, frequency agility on a pulse-to-pulse basis allowing frequency hopping if desired, and extensibility from below HF to millimeter wave frequencies.

A semiconductor device which has a high performance integrated circuit formed of an inexpensive glass substrate and capable of processing a large amount of information and operating at higher data rates. The semiconductor device includes semiconductor elements stacked by transferring a semiconductor element formed on a different substrate. A resin film is formed between the stacked semiconductor elements and a metal oxide film is partially formed between the stacked semiconductor elements as well. A first electric signal is converted to an optical signal in a light emitting element electrically connected to one of the stacked semiconductor elements. Meanwhile, the optical signal is converted to a second electric signal in a light receiving element electrically connected to another one of the stacked semiconductor elements.

Representations of spatial audio scenes using higher-order Ambisonics HOA technology typically require a large number of coefficients per time instant. This data rate is too high for most practical applications that require real-time transmission of audio signals. According to the invention, the compression is carried out in spatial domain instead of HOA domain. The (N+1)2 input HOA coefficients are transformed into (N+1)2 equivalent signals in spatial domain, and the resulting (N+1)2 time-domain signals are input to a bank of parallel perceptual codecs. At decoder side, the individual spatial-domain signals are decoded, and the spatial-domain coefficients are transformed back into HOA domain in order to recover the original HOA representation.

Carrier aggregation allows concurrent transmission on multiple component carriers (CC) to increase the data rate. A user equipment (UE) device in a cellular network provides periodic or aperiodic channel state information of the DL channel to a base station (eNB) for each of the aggregated CCs. The UE receives two or more reference signals corresponding to two or more aggregated CCs from an eNB. The UE computes a plurality of channel state information (CSI) reports for each of two or more aggregated CCs derived from the two or more reference signals. The UE receives a positive CSI request from the eNB for a CSI report and transmits CSI feedback to the eNB comprising one or more CSI reports selected from the plurality of CSI reports.

A high speed serial interface is provided. In one aspect, the high speed serial interface uses three phase modulation for jointly encoding data and clock information. Accordingly, the need for de-skewing circuitry at the receiving end of the interface is eliminated, resulting in reduced link start-up time and improved link efficiency and power consumption. In one embodiment, the high speed serial interface uses fewer signal conductors than conventional systems having separate conductors for data and clock information. In another embodiment, the serial interface allows for data to be transmitted at any speed without the receiving end having prior knowledge of the transmission data rate. In another aspect, the high speed serial interface uses polarity encoded three phase modulation for jointly encoding data and clock information. This further increases the link capacity of the serial interface by allowing for more than one bit to be transmitted in any single baud interval.

A method of billing a variable bit rate communication between a first terminal and a distant terminal to a broadband subscriber permits changing billing parameters during a call in real time in response to user inputs including user requested changes in quality of service, changes in data rate and changes in preferred service provider. A variable bit rate communication to be billed has a variable quality of service related to the degree of utilization of a plurality of different networks. The billing method comprises the steps of i.) receiving user identification data at a first terminal and data representing a required bit rate and a default quality of service selected by the user, ii.) verifying the user identification data to be associated with the broadband service subscriber, iii.) determining least cost alternative network resources available for achieving the communication at the user selected default quality of service and the required bit rate, iv.) determining cost data associated with the network resources, v.) outputting to the user a least cost for the communication according to their selected default quality of service and alternative least cost network resources, vi.) coupling the first terminal and the distant terminal via the least cost determined network resources at the default quality of service and the required bit rate responsive to user authorization and vii.) billing for the communication at the default quality of service and according to the required bit rate after the termination of the communication.

A power line communication device configured to facilitate communications over a low voltage power line between a downstream user device and an external power line communication device is provided. In one embodiment, the device may include a communication module configured to communicate over a low voltage power line and a controller configured to control the module. The controller is configured to operate the module in a first configuration in which all repeating is disabled; and a second configuration wherein upstream repeating is enabled and downstream repeating is disabled. The controller may transition from the first configuration to the second configuration in response to a command received via the low voltage power line or upon determining that a triggering event has been detected such as an unacceptable data rate, error rate, or noise detection. In some embodiments, the device may form part of a utility meter and also transmit utility data to the power line communication device.

A point-to-point, wireless, millimeter wave communications link between two stations at least one of which is a mobile station. A millimeter wave transmitter system operating at frequencies higher than 57 GHz with a tracking antenna producing a beam having a half-power beam width of about 2 degrees or less and a millimeter wave receiver also with a tracking antenna having a half-power beam width of about 2 degrees or less. In preferred embodiments each mobile station has a global position system (GPS) and a radio transmitter and both tracking antennas are pointed utilizing GPS information from the mobile station or stations. The GPS information preferably is transmitted via a low frequency, low data rate radio. Each millimeter wave unit is capable of transmitting and / or receiving, through the atmosphere, digital information to / from the other station at rates in excess of 155 million bits per second during normal weather conditions. In preferred embodiments actually built and tested by Applicants digital information has been transmitted at rates of 1.25 gigabits per second. Preferred communication links described here are millimeter wave links operating at frequencies of 71-73 GHz and 74-76 GHz mounted on simple two-axis gimbals. Pointing information of the required accuracy is provided by GPS receivers and standard radio links which send the GPS calculated positions to the millimeter wave systems at the opposite end of the link. In these embodiments there is no need for any complicated closed loop pointing information derived from received signal intensity or phase. On moving platforms locally generated inertial attitude information is combined with the GPS positions to control pointing of the gimbaled transceivers.

Embodiments of the invention relate to cellular wireless networks and are particularly suited to networks including different types of base stations. So-called femtocell base stations are typically deployed within a subscriber's premises and operate at low transmit power, providing a very limited area of wireless coverage. A femtocell is typically deployed within the area of wireless coverage of a conventional macrocell type of base station, and if handover from a macrocell is performed on the basis of the best signal to noise plus interference ratio, a connection is likely to be transferred to another macrocell rather than to a femtocell. However, in view of the low density of user equipments capable of transceiving with a femtocell, the femtocell could potentially provide a greater data rate to the user equipment terminal than is possible with a macrocell. A cellular wireless network according to an embodiment of the invention employs a method of handover algorithm that has dependence on both a measure of signal quality such as signal to noise plus interference ratio and on a measure of loading of the base station. The handover algorithm is thereby able to weight selection of a base station on the basis of data rate, and intelligently engineer handover to a femtocell.

A PC-based home automation system uses a low data-rate transport layer and COM-based software components for control of devices in a home automation network. The home automation system is merged with a messaging-based HAVi-network that uses IEEE 1394 as a high data-rate transport layer. The HAVi-network controls audio / video equipment in a home entertainment system. The home automation services and devices are registered as a HAVi-compliant elements with the HAVi network's FAV or IAV device. The home automation resources (devices and services) have both COM OLE Automation Interfaces and HAVI-compliant interfaces to permit control of the home automation system from the HAVi-network.

In a wireless network, a lowest cost path from a source node to a target node is selected from a plurality of potential paths. The source node sums costs for the links of each potential path. For each link, these costs include a cost of interference, dependent on a number of nodes affected by a signal sent via the respective link. The link costs can also include a cost of transmission, dependent upon a data rate for the respective link, and a cost of coordination for transmissions with other nodes of the network.

A dual-band antenna is provided that combines two normally disparate communications modes into a single compact aperture minimizing overall mass and volume, while maintaining high performance efficiency and reciprocity of each individual mode. The antenna is compatible with both optical (near-IR / visible) and RF (microwave / millimeter-wave) transceiver subsystems for high bandwidth communications, applicable primarily to long- to extremely long-range (space-to-ground) link distances. The optical link provides high bandwidth while the RF provides a lower data-rate weather backup, accommodation for traditional navigation techniques, and assistance in cueing the extremely tight optical beam by matching the RF beamwidth to an optical fine-steering mechanism field-of-regard. The configuration is built around a near-diffraction-limited high performance primary mirror shared by both a direct-fed RF antenna design and a Cassegrain optical telescope. Material properties are exploited to combine the optical secondary mirror with the RF feed structure, providing a collimated optical beam interface at the antenna vertex.

A system and method for dynamically optimizing the performance of indoor distributed antenna systems communicate to user equipment is disclosed. The user equipment measures information describing the downlink signals such as the downlink data rates, the quality of the received signal, and the location of the user equipment. A service module collects this information and determines an optimized power level for each of the antenna units. The service module may optimize only one antenna unit power level or a subset of the antenna units within the distributed antenna system in a preferred embodiment. One or more of the antenna units then transmits downlink signals with the optimized power levels. The optimized power level may be less than the initial power level in a preferred embodiment. As a result, the performance of the indoor distributed antenna systems is enhanced.

Disclosed is a system and methods for accelerating network packet processing for devices configured to process network traffic at relatively high data rates. The system incorporates a hardware-accelerated packet processing module that handles in-sequence network packets and a software-based processing module that handles out-of-sequence and exception case network packets.

A method and system (102) provide adaptive modulation / coding with distribution of excess resources based on one or more system criteria. The system (102) may be any system with more than one modulation rate or more than one coding rate and may be a wireless communication system using CDMA, TDMA, OFDM or any other signal formats. Generally, the method determines excess resources of the system based on desired characteristics of links supported by the system. The excess resources may be any number of system resources, such as transmit power. These excess resources are then distributed to the links based on various system criteria, such as to increase system coverage, to increase system capacity, to modify a data rate profile of the system or to reduce interference in the system. Methods for providing such distribution of the excess resources are also provided for equal data rate systems.

Disclosed is a base station of a wireless communications system including an adaptive antenna array and beam forming means for forming simultaneous multiple forward link beams. Preferably mobile stations are separated into groups of mobile stations corresponding to a maximum number of simultaneous forward link beams for determining which of said groups can be served by compatible simultaneous forward link beams. Preferably, if mobiles remain outside of a compatible group, the number of simultaneous forward link beams is increased and grouping of the mobile stations is repeated until all the mobile stations are included in compatible groups. Preferably simultaneous data beams are formed to mobiles of a said group during a time interval accorded to said group, such that every mobile station receives service data during a full cycle of said time intervals at a rate equal to or in excess of a target service data rate for that mobile.

A vibration data collection system performs an integration or differentiation process on incoming digitized vibration data in real time. The system uses a digital Infinite Impulse Response (IIR) filter running at the input data rate to provide the integration or differentiation function. With this approach, the system reduces hardware complexity and data storage requirements. Also, the system provides the ability to directly integrate or differentiate stored time waveforms without resorting to FFT processing methods.

The invention pertains to location approximation of devices, e.g., wireless access points and client devices in a wireless network. Location estimates may be obtained by observation / analysis of packets transmitted or received by the access point. For instance, data rate information associated with a packet is used to approximate the distance between a client device and the access point. This may be coupled with known positioning information to arrive at an approximate location for the access point. Confidence information and metrics about whether a device is an access point and the location of that device may also be determined. Accuracy of the location determination may be affected by factors including propagation and environmental factors, transmit power, antenna gain and diversity, etc. A location information database of access points may employ measurements from various devices over time. Such information may identify the location of client devices and provide location-based services to them.

A remote camera relay method and apparatus for remotely operating a self-contained, unattended digital camera over a communications link. Format conversion means are included for transparently relaying control signals and remote image data between a local host processor and the remotely located digital camera, independently of specific camera command and image protocols. It thereby functions as a universal remote image transmission adapter, operable as an attachment for use with self-contained digital cameras. A portable enclosure is provided for accommodating the remote relay communications and control electronics and for attaching a hand-held digital camera thereto. Further means are included for remotely actuating the pan and tilt orientation of the camera in accordance with field-of-view selection commands. Data rate conversion and error correction coding are included for providing reliable, low power image forwarding. The communications channel could be a dial-up telephone system, a network connection, modem, an infra-red link or a wireless RF link, for example. Additional control means are provided for remotely selecting the camera field of view for image capture, and includes the ability to access only those subsets of image scenes for which viewing permissions are authorized. A further mode of operation includes protocol training whereby host photographing commands are captured by the remote relay invention during on-line operation, then replayed at programmed times resulting in automatic scheduled remote image capture. Power management is provided for maximizing operating time when used in low power, portable, battery operation.

A system for providing an accurate prediction of a signal-to-interference noise ratio is described. The system includes a first circuit for receiving a signal transmitted across a channel via an external transmitter. A second circuit generates a sequence of estimates of signal-to-interference noise ratio based on the received signal. A third circuit determines a relationship between elements of the sequence of estimates. A fourth circuit employs the relationship to provide a signal-to-interference noise ratio prediction for a subsequently received signal. In the illustrative embodiment, the inventive system further includes a circuit for generating a data rate request message based on the signal-to-noise ratio prediction. A special transmitter transmits the data rate request message to the external transmitter. In the specific embodiment, the relationship between elements of the sequence of estimates is based on an average of the elements of the sequence of estimates. The third circuit includes a bank of filters for computing the average. The bank of filters includes finite impulse response filters. Coefficients of the transfer functions associated with each filter in the bank of filters are tailored for different fading environments. The different fading environments include different Rayleigh fading environments, one environment associated with a rapidly moving system, a second environment associated with a slow moving system, and a third system associated with a system moving at a medium velocity. A selection circuit is connected to each of the filter banks and selects an output from one of the filters in the filter bank. The selected output is associated with a filter having a transfer function most suitable to a current fading environment.