101 results about "International standardization" patented technology

Modular data centers with modular components suitable for use with rack or shelf mount computing systems, for example, are disclosed. The modular center generally includes a modular computing module including an intermodal shipping container and computing systems mounted within the container and configured to be shipped and operated within the container and a temperature control system for maintaining the air temperature surrounding the computing systems. The intermodal shipping container may be configured in accordance to International Organization for Standardization (ISO) container manufacturing standards or otherwise configured with respect to height, length, width, weight, and / or lifting points of the container for transport via an intermodal transport infrastructure. The modular design enables the modules to be cost effectively built at a factory and easily transported to and deployed at a data center site.

The transmission of ATM, Internet, and satellite communications is unified through international standardized protocol embedment. Global and Local performance optimization are achieved through the combination of combinatorial, dynamic, and probabilistic programming. A simultaneous domino effect of bandwidth conservation, efficiency enhancement, reliability improvement, traffic congestion prevention, delay minimization, and speed multiplication are realized for any digital communication system, particular in Internet. With three levels of error coding in ATM cells, the loss cell recovery and bit integrity are preserved. From its mathematical roots, new combinatorial sets are systematically generated, and applications of the sets are identified. Among the applications, optimal sequences can be produced for multi-user and multi-function communication system designs. Optimality is in terms of maximum possible number of sequences with given sequence length and sequence characteristics. The results are unique and theoretically proven. By serial and parallel concatenation of error codecs, reliability of multimedia transmission can be satisfied to any desirable level. As a part of the unified transmission scheme, the acquisition and synchronization method of cascading sequences exhibits significant improvement in correlation properties and detection probabilities. A method of using block designs is demonstrated to derive, to generate, and to construct low-density parity check block codes and threshold decodable convolutional codes. An efficiency evaluation method is formulated for the combination operation of ATM, Internet, and satellites.

The present invention relates to a process for producing an irregularly shaped Radio Frequency operable transaction device using conventional International Standards Organization dimensions for conventional transaction cards. The invention provides for normal manufacture of a plurality of transaction cards joined together in a single sheet. The outline of a RFID transaction device is impressed in a center portion of one of the transaction cards. A RFID transaction device may then be removed, or punched out of the transaction card in accordance with the transaction device outline.

A method and apparatus for generating a stereoscopic file defined based on a conventional International Standardization Organization (ISO) based media file format. The apparatus includes an encoder encoding first video data and second video data that are included in three-dimensional (3D) video data; and a file generating unit arranging the encoded first video data and second video data according to the information of a stereoscopic file format including boxes that are selected from boxes included in a conventional International Standardization Organization (ISO) based media file format in order to store and generate the stereoscopic file, and generating the stereoscopic file.

The present invention relates to a driver protection structure and a device supporting the same which secure driver's safety according to the international standardization organization when collided with a falling object and upon equipment's rollovers, comprising a first stopper which allows a driver's cabin and the driver protection structure mounted over the driver's cabin to move in a vertical direction and restricts the driver's cabin to move in a horizontal direction, and a second stopper which allows the driver's cabin to move in the vertical direction and restricts the driver's cabin to be lifted when a load is applied to the driver's cabin from external.

The invention discloses a configurable method for a diagnostic protocol stack based on a CAN (controller area network) bus. The diagnostic protocol stack is realized according to international diagnostic standards ISO (international standardization organization) 15765 and AUTOSAR (automotive open system architecture) standards, and comprises an encapsulated network layer, an application layer module, an application layer standard interface, an ECU (electronic control unit) abstraction layer standard interface and a configurable file. When users carry out diagnostic requirement development, the existing module is applied for setting the configurable parameters through the configurable file, and only the concentration on the realization of application layer and bottom layer driving according to the standard interface is needed. The configurable method has the advantages that the universality, the reliability and the portability of diagnostic software are enhanced, the transplantation on different hardware platforms is convenient, the repeated development of the protocol stack of the network layer and an application layer is avoided, the development time is greatly shortened, the development cost is reduced, and the development and the expansion are convenient.

Modular data centers with modular components suitable for use with rack or shelf mount computing systems, for example, are disclosed. The modular center generally includes a modular computing module including an intermodal shipping container and computing systems mounted within the container and configured to be shipped and operated within the container and a temperature control system for maintaining the air temperature surrounding the computing systems. The intermodal shipping container may be configured in accordance to International Organization for Standardization (ISO) container manufacturing standards or otherwise configured with respect to height, length, width, weight, and / or lifting points of the container for transport via an intermodal transport infrastructure. The modular design enables the modules to be cost effectively built at a factory and easily transported to and deployed at a data center site.

An electrical receptacle is disclosed, which is configured to fit and mount into an outlet box and has a front panel configured to receive different internationally standardized plug pin arrangements.

The invention discloses a workpiece attitude adjustment method based on a measuring point and adaptive differential evolution algorithm. The method includes the steps of initial matching and accuratematching. Firstly, reference points are selected on a theoretical workpiece curved surface and an actual curved surface to build corresponding local coordinate systems, and initial matching is realized by rough alignment of the local coordinate systems. In accurate matching, a target function based on a least-square distance is built through a point set after initial matching, an optimal solutionenables a value of the target function to be minimum and is searched by the adaptive differential evolution algorithm, so that an optimal accurate matching matrix is acquired. By the two steps, a final space transformation matrix can be acquired, adjustment amount corresponding to a machine tool can be calculated by combining a structure of the machine tool, the machine tool is adjusted, so that aworkpiece attitude is adjusted, a workpiece is accurately positioned, and allowances are uniformly distributed. According to the method, attitude adjustment and accurate positioning of testing partsmachined by an ISO (international standardization organization) five-axis numerical control machine tool are achieved, and effectiveness of the method is verified.

Methods and compositions for the prevention and / or reduction of plaque, plaque build-up and / or gingivitis are provided. Bioactive glass compositions are provided which prevent or reduce plaque, plaque build-up and / or gingivitis through the use of low levels of small bioactive glass particles in amounts from about 0.25 to about 10% by weight in non-aqueous formulations. The resulting non-aqueous compositions are effective in dentifrice products and are stable and pass ISO (International Organization for Standardization) standards. Moreover, these bioactive glass containing non-aqueous compositions have unexpectedly high levels of antimicrobial activity against oral pathogens.

Described is a process and system for tracing a company's work products to the equivalent work product element requirements for individual maturity models in order to ascertain an approximate determination of the maturity level of a particular maturity model that has been achieved by the company. The maturity models included, for example, CMM-based models, or maturity model equivalents such as, contractor operational processes and ISO (International Standards Organization) requirements.

A method and system for resetting a network device. Specifically, in one embodiment, a method is disclosed for upgrading and / or reloading software for a network device with minimal disruption. The method begins by separating operations associated with layer two of an International Standardization Organization Open Systems Interconnect (ISO / OSI) reference model from other layers in the ISO / OSI reference model in a network device. Then, the software operations in layer two of the network device are reset. The software operations are reset while maintaining continuity for a communication session between the network device and other network devices coupled together through a network. Thereafter, for minimal disruption, execution of the software operations is recovered at layer two before continuity of the communication session s terminated.

The present invention relates to a driver protection structure and a device supporting the same which secure driver's safety according to the international standardization organization when collided with a falling object and upon equipment's rollovers, comprising a first stopper which allows a driver's cabin and the driver protection structure mounted over the driver's cabin to move in a vertical direction and restricts the driver's cabin to move in a horizontal direction, and a second stopper which allows the driver's cabin to move in the vertical direction and restricts the driver's cabin to be lifted when a load is applied to the driver's cabin from external.

The invention provides a method for defining a signal having a required radio frequency characteristic into an instruction signal requiring a label to execute certain or a certain group of pre-determined operation by using the radio frequency characteristic, different from the radio frequency characteristics of other wireless signals, of a wireless data signal and a characteristic that quick identification can be performed through a radio frequency transceiver, and using a working frequency channel of a jump label simultaneously in order to solve the problem that a reader-writer represented by the international standardization organization (ISO)-18000-7 international standard wastes time and power during reading and writing of data on the label, so the problem that the battery life of the wireless communication equipment which is represented by an active electronic label and has low power consumption requirement is short can be solved basically. In the combination of a fixed time slot distribution mode, the speed and the efficiency of reading and writing the label on the basis of the ISO-18000-7 standard are greatly improved. Although the ISO-18000-7 defines an electronic label system having a 433M frequency band, the method can be applicable to any other wireless communication frequency bands and wireless communication systems.

The invention discloses a decoding circuit suitable for correcting a miller code signal at a high speed. The decoding circuit comprises a radio frequency receiver for receiving a radio frequency signal with a pause period and outputting a base-band signal and a synchronous clock signal; a starter for receiving the base-band signal and outputting a reset signal; a first counter for counting the synchronous clock signal; a falling edge detector for receiving the base-band signal, the synchronous clock signal and the reset signal and outputting a high-level pulse signal; a data decoder for decoding pause signals of both the first counter and the falling edge detector and outputting a decoded binary data signal; a clock generator for outputting a clock signal with a basic time unit period; and a data frame indicator for receiving the base-band signal and generating frame reception starting and ending signals and a frame error indication signal. The decoding circuit suitable for correcting the miller code signal at the high speed is simple, has strong anti-interference performance and generates the synchronous clock signal at the fixed frequency and ISO(International Standardization Organization) / IEC(International Electro-technical Commission)14443 protocol for data decoding.

A method for predicting the residual life of a bearing comprising the steps of measuring contact forces and / or high frequency stress waves emitted by rolling contact of the bearing, recording the measurement data as recorded data, and predicting the residual life of the bearing using the recorded data and an International Organization for Standardization (ISO) bearing life model whereby load is determined from measurements of contact forces and / or lubrication quality is determined from the high frequency stress waves emitted by rolling contact, rather than by the International Organization for Standardization (ISO) rolling-element bearing life model.

The present invention discloses a portable fast detector of chemicals, which has a modularized combined structure. The detector comprises a frame body; the frame body is provided with a sampling module, a gas interface, a detector module, a micro integrated column separation module, a main control module, a detection circuit module and a power drive and event module; the sampling module and the detector module are respectively connected with the micro integrated column separation module, the micro integrated column separation module, the detection circuit module and the power drive and event module are respectively connected with the main control module, and the connecting joints of all the modules are internationally standardized fast connecting joints. The invention provides a portable fast detector of chemicals, which has a novel modular structure and is designed according to the characteristics of emergency detection and fast analysis of the chemicals in the adverse environment and complex emergent events, has the characteristics of convenient movement (comprising portable, vehicle carrying, airplane carrying and ship carrying movements), low power, fast analysis and high efficiency, and has the characteristics of fast combination and integration, and so on.

A method for automatically checking in passengers and their luggage by an electronic input of the passenger data or travel data by the passenger himself into an automatic check-in terminal is provided. In the automatic check-in terminal, possibly following selection of various criteria, the boarding pass and one or more information media for attachment to the luggage are created and output. The information medium created is a luggage tag which is easy to affix to the luggage item and which contains, in machine-readable form, at least all the data and information which are required for a later generation of an internationally standardized, preferably self-adhesive luggage band which is affixed to the luggage item within a conveying and sorting system in addition to the luggage tag.

The invention relates to a community resident health document and clinical information integrated information system, which comprises a module for prevention and health-care information processing, a module for clinical diagnosis and treatment information processing, and a module for management information processing. Six-in-one service contents including community prevention, health-care, recovering, medical treatment, health education and family planning technical instruction are blended in the personal health information by using computer and network technique including a portable intelligent terminal, an international internet and a virtual network platform. The community sanitation information is exchanged through international standard electronic health information exchanging protocol, so that the clinical information and the prevention health-care information are shared and communicated. The regional medical treatment resource share realizes internet double referral or remote consultation. Compared with the prior art, the invention has the advantages of information resource share, management convenience, health information storage and convenient management.

A method and system for point-of-dispensing, point-of-sale, or retail pharmacy management of an anticoagulation agent therapy for a subject, includes reviewing an anticoagulation regimen and obtaining data for a subject relating to anticoagulation therapy, determining an International Normalized Ratio (INR) level for the subject, determining any potential interaction of the anticoagulation agent with one or more non-anticoagulation agents that the subject intends to take or is taking, evaluating in real time any need to adjust the anticoagulation regimen, and adjusting in real time, if needed, the anticoagulation regimen based on one or both INR level and any interaction determinations, to maintain the subject's INR level within a desired range.

The invention provides a method for lightweight security synchronization in a smart sensor network. The method comprises the following steps of step S1 an authentication stage, namely broadcasting an authentication message between a sensor node and an application program; step 2 a timestamp transfer stage, namely transferring timestamp information through a lightweight encryption algorithm to guarantee communication security; and step S3 a time synchronization stage, namely considering pulse propagation time delay of the authentication stage and the timestamp transfer stage to carry out time synchronization adjustment. The method can be applied to ISO (International Standardization Organization) / IEC (International Electrotechnical Commission) / IEEE (Institute of Electrical and Electronic Engineers) 21451; security needs in a synchronization mechanism are fully met, the security is improved, and some false and invalid information can be discarded in a transmission process; the security performance of time synchronization is only improved at the cost of fine delay, and meanwhile, the method can be applied to a sensor network of ISO / IEC / IEEE 21451.

The invention relates to an automotive open system architecture (AUTOSAR)-compatible K line diagnostic method and an AUTOSA-compatible K line diagnostic system. The method comprises the following steps: adding a K line driving module at a communication driving layer of the AUTOSAR; adding a K line interface module at a communication hardware abstract layer of the AUTOSAR; and adding an international standardization organization (ISO) 14230 standard diagnostic service of a key word protocol (KWP) 2000 diagnostic protocol in a data control memory (DCM) module of the AUTOSAR communication service layer. By adopting the invention, AUTOSAR basic software can be enriched, so that the AUTOSAR can support the K line communication and ISO 14230 diagnostic protocol stack, therefore a solution of the perfect and integrated communication diagnostic software is provided for customers.

The invention relates to a UHF (Ultra High Frequency) multi-protocol RFID (Radio Frequency Identification) reader-writer baseband signal processing IP (Internet Protocol) core. The IP core adopts a verilog language for compiling and a modular design; and the IP core comprises a bus interface, a register mapping unit, a logic sending module, a logic receiving module, a CRC-5 (Cyclic Redundancy Check-5) logic occurring module, a CRC-16 (Cyclic Redundancy Check-16) logic occurring and check module, a coding module, a decoding module and a clock division module. The invention also relates to a working method of the IP core. Compared with the prior art, the UHF multi-protocol RFID reader-writer baseband signal processing IP core and the working method thereof are good in expandability, tailorability and transferability, are low in cost and can realize an electronic tag simultaneously reading ISO / IEC18000-6B (International Standardization Organization / International Electrotechnical Commission 18000-6B) and ISO / IEC18000-6C (International Standardization Organization / International Electrotechnical Commission 18000-6C) protocols from the hardware level; the IP core can complete automatic conversion application of the two protocols on the hardware level; the application is one of innovation points of the invention; and in the relevant fields, the application prospect is broad.

The invention provides an electronic ear tag for animal group breeding. The electronic ear tag comprises a passive low frequency electronic tag and an active ultrahigh frequency electronic tag. The passive low frequency electronic tag comprises a copper coil and a response chip conforming to the international animal tag standard international standardization organization (ISO) 11784 / 5. The active ultrahigh frequency electronic tag comprises a printed circuit board (PCB) antenna, a radio frequency receiving chip modulated by ultrahigh frequency amplitude shift keying (ASK), a single-chip computer, a button cell and a high-brightness light emitting diode (LED). The PCB antenna is connected with the radio frequency receiving chip, the radio frequency receiving chip, the button cell and the high-brightness LED are all connected with the single-chip computer, the single-chip computer comprises a storage module for storing a unique ear tag identity (ID) number of the passive low frequency electronic tag, and the unique ID numbers correspond to identity marks of animal one to one. An animal identification method for using the electronic ear tag to achieve animal group breeding is provided. Under the condition of low cost, the electronic ear tag for the animal group breeding and the identification method simultaneously support international animal standard, achieve remote identification, and are particularly suitable for being used under the condition of animal group breeding and good in practicability.

The invention discloses a sheeting assembled container. The sheeting assembled container is a general cargo container which is formed by combining a bottom finished product module, a top finished product module, two side finished product modules, a front finished product module and a door part finished product module and accords with ISO (International Standardization Organization) standard, wherein an accommodating chamber is formed on a door end corner column of each side finished product module, and an accommodating groove is formed in a front end corner column of each side finished product module; first convex blocks which are correspondingly inserted into the accommodating chambers and are rectangular in horizontal sections are formed on door end corner pieces and second convex blocks which are correspondingly arranged on the inner side surfaces of the accommodating chambers in an attaching manner and are L-shaped in horizontal sections are formed on front end corner pieces, in the bottom finished product module and the top finished product module; and connecting holes are separately formed in the convex blocks and the column columns. Various corners of the container are fixedly connected together by means of connecting pieces arranged in the corresponding connecting holes in a penetrating manner. The conventional integrated manufacturing is improved into modular manufacturing, and a revolutionary improvement can be brought for manufacturing, stockpiling and transporting of the containers.

The invention discloses a groove signal restoring circuit for an ISO (international standardization organization) 14443 Type A protocol. The groove signal restoring circuit comprises a data latch, a first D trigger, a second D trigger, a third D trigger, a data exclusive nor gate circuit, a fourth D trigger, a clock frequency divider and a type A synchronous decoding circuit, wherein the data latch is used for enabled latched input clock signals CLK, an output end Q of the data latch outputs signals sysclk as clock signals of a circuit; the first D trigger is used for generating synchronous signals of first-grade groove signals; the second D trigger is used for generating synchronous signals of second-grade groove signals; the third D trigger is used for generating synchronous signals of third-grade groove signals, the data exclusive nor gate circuit is used for exclusive nor of output of the second D trigger and the third D trigger, the fourth D trigger is used for sampling required groove signals; the clock frequency divider is used for dividing the clock signals of the circuit; and the type A synchronous decoding circuit is used for decoding the groove signals synchronously. Affection on the circuit from clock signal burrs and race hazards can be reduced.