669 results about "Active load" patented technology

A synchronous bi-directional active power conditioning system (11) suitable for wide variable frequency systems or active loads such as adjustable speed drives which require variable voltage variable frequency power management systems is disclosed. Common power electronics building blocks (100, 200) (both hardware and software modular blocks) are presented which can be used for AC-DC, DC-AC individually or cascaded together for AC-DC-AC power conversion suitable for variable voltage and / or wide variable frequency power management systems. A common control software building block (2, 5) includes a digital control strategy / algorithm and digital phase lock loop method and apparatus which are developed and implemented in a digital environment to provide gating patterns for the switching elements (3, 6) of the common power-pass modular power electronics building blocks (100, 200).

A utility employs an active load management system (ALMS) to estimate available operating reserve for possible dispatch to the utility or another requesting entity (e.g., an independent system operator). According to one embodiment, the ALMS determines amounts of electric power stored in power storage devices, such as electric or hybrid electric vehicles, distributed throughout the utility's service area. The ALMS stores the stored power data in a repository. Responsive to receiving a request for operating reserve, the ALMS determines whether the stored power data alone or in combination with projected energy savings from a control event is sufficient to meet the operating reserve requirement. If so, the ALMS dispatches power from the power storage devices to the power grid to meet the operating reserve need. The need for operating reserve may also be communicated to mobile power storage devices to allow them to provide operating reserve as market conditions require.

A utility employs a method for estimating available operating reserve. Electric power consumption by at least one device serviced by the utility is determined during at least one period of time to produce power consumption data. The power consumption data is stored in a repository. A determination is made that a control event is to occur during which power is to be reduced to one or more devices. Prior to the control event and under an assumption that it is not to occur, power consumption behavior expected of the device(s) is estimated for a time period during which the control event is expected to occur based on the stored power consumption data. Additionally, prior to the control event, projected energy savings resulting from the control event are determined based on the devices' estimated power consumption behavior. An amount of available operating reserve is determined based on the projected energy savings.

The invention discloses a power system load modelling method, including the steps that: A, load classification based on daily active load curve; B, load modelling based on statistic synthesis method; C, load model parameter sensitivity analysis and range analysis based on simulation analysis; D, load model parameter node identification based on genetic algorithm, namely node identification is carried out by taking fitted local disturbance data as target, setting low sensitivity parameter value as statistic synthesis method surveying parameter value and adopting the genetic algorithm, so as to obtain multiple groups of load model parameters; E, load model parameter wide area check based on WAMS, namely load model parameter check is carried out by taking the multiple groups of solutions identified by node as initial value and taking accurate fitting on system wide area dynamic characteristic as target, so as to obtain unique solution capable of reflecting wide area dynamic characteristic when system is subject to disturbance. The invention solves the problems of multiple solutions and identifiability of overall measuring identifying method by load point classification and load model parameter aggregation and has popularization and application values.

A system and method for creating and making use of customer profiles, including energy consumption patterns. Devices within a service point, using the active load director, may be subject to control events, often based on customer preferences. These control events cause the service point to use less power. Data associated with these control events, as well as related environment data, are used to create an energy consumption profile for each service point. This can be used by the utility to determine which service points are the best targets for energy consumption. In addition, an intelligent load rotation algorithm determines how to prevent the same service points from being picked first each time the utility wants to conserve power.

A system is disclosed that provides functionality for mobile communications service bridging with distributed service gateway call managers that allow application clients running on users' communication devices to be served by any of the available service gateways, preferably in an active-active load balance configuration. Each service gateway instance may bridge the application client to a range of network services such as voice origination and termination services, IM services, messaging services, online community services, IP voice services, and premium services such as multiparty click-to-conference, directory services, and voice mail.

An apparatus for wirelessly charging a battery of an electric vehicle is provided with a point of load control. The apparatus includes a base unit for generating a direct current (DC) voltage. The base unit is regulated by a power level controller. One or more point of load converters can be connected to the base unit by a conductor, with each point of load converter comprising a control signal generator that transmits a signal to the power level controller. The output power level of the DC voltage provided by the base unit is controlled by power level controller such that the power level is sufficient to power all active load converters when commanded to do so by any of the active controllers, without generating excessive power that may be otherwise wasted.

An aircraft load management system that determines the position of an aircraft cargo hook for display to an aircrew. The cargo hook positional information may alternatively or additionally be communicated directly to a flight control system and a winch control system to automate and coordinate flight control inputs with winch operation to actively position the cargo hook. Data transfer from the cargo through a data link system also provides the load management system with exact position of the cargo load connection points even prior to attachment of the cargo hook to the load. The load management system also includes anti-sway algorithms for active load stability inputs to the flight control system and to alter flight control laws and automatically compensate for C.G. excursions.

An active load management system (ALMS) controllably restarts electrical service to service points in a utility service area after a power outage. The ALMS includes client devices installed at the service points and a central controller. In one embodiment, the controller associates numbers with the service points and stores the associations. Each service point may be associated with a unique number or a group of service points may share a number. After receiving notification that power is available, the controller determines a number and communicates the number to one or more of the client devices. Where the number was determined randomly, the client devices associated with the number may restart electrical service upon receipt of the number. Where the number was determined sequentially, a client device may determine its own random number and compare it to the received number. If a match occurs, electrical service can be restarted.

A scalable broker publish / subscribe broker network using a suite of active load balancing schemes is disclosed. In a Distributed Hashing Table (DHT) network, a workload management mechanism, consisting of two load balancing schemes on events and subscriptions respectively and one load-balancing scheduling scheme, is implemented over an aggregation tree rooted on a data sink when the data has a uniform distribution over all nodes in the network. An active load balancing method and one of two alternative DHT node joining / leaving schemes are employed to achieve the uniform traffic distribution for any potential aggregation tree and any potential input traffic distribution in the network.

It's an object-based storage device load balancing method, belonging to the computer storage technology, aiming at balancing the distribution of the system load in the storage nodes by reasonable scheduling of I / O load and hot data migration, to take full advantage of high-performance of storage device nodes. The order of the invention includes: (a) active load detection steps; (2) equipment load statistics steps; (3) object migration and copies management steps; (4) object properties expansion steps; (5) I / O request processing steps. The invention expands the SCSI protocol standards of object storage devices (OSD). With the advantages of object storage model, it provides basis for I / O scheduling decision, makes full use of the computing capacity of all the storage nodes to balance the load, reduce storage system response time and increase the storage system throughput.

A utility employs a method for generating available operating reserve. Electric power consumption by at least one device serviced by the utility is determined during at least one period of time to produce power consumption data, stored in a repository. A determination is made that a control event is to occur during which power is to be reduced to one or more devices. Prior to the control event and under an assumption that it is not to occur, power consumption behavior expected of the device(s) is generated for a time period during which the control event is expected to occur based on the stored power consumption data. Additionally, prior to the control event, projected energy savings resulting from the control event, and associated with a power supply value (PSV) are determined based on the devices' power consumption behavior. An amount of available operating reserve is determined based on the projected energy savings.

An apparatus for wirelessly charging a battery of an electric vehicle is provided with a point of load control. The apparatus includes a base unit for generating a direct current (DC) voltage. The base unit is regulated by a power level controller. One or more point of load converters can be connected to the base unit by a conductor, with each point of load converter comprising a control signal generator that transmits a signal to the power level controller. The output power level of the DC voltage provided by the base unit is controlled by power level controller such that the power level is sufficient to power all active load converters when commanded to do so by any of the active controllers, without generating excessive power that may be otherwise wasted.

A data emission / reception device by inductive coupling includes an inductive antenna circuit in which an antenna signal appears, a mechanism configured to for extracting a first periodic signal from the antenna signal, a synchronous oscillator receiving the first periodic signal and supplying a second periodic signal, and an active load modulation circuit configured to apply bursts of the second periodic signal to the antenna circuit. The device is configured to place the oscillator in the synchronous oscillation mode before each application of a burst of the second periodic signal to the antenna circuit, then place the oscillator in the free oscillation mode.

A utility employs a method for generating available operating reserve. Electric power consumption device(s) serviced by the utility is determined during period(s) of time to produce power consumption data, stored in a repository. A determination is made that a control event is to occur during which power is to be reduced to one or more devices. Prior to the control event and under an assumption that it is not to occur, power consumption behavior expected of the device(s) is generated for a time period during which the control event is expected to occur based on the stored power consumption data. Additionally, prior to the control event, projected energy savings resulting from the control event, and associated with a power supply value (PSV) are determined based on the devices' power consumption behavior. An amount of available operating reserve is determined based on the projected energy savings.

A cluster of devices is provided that shares a domain name and functions as the authoritative name server for the domain. Each device or node in the cluster would typically repeatedly announce status information to all the other nodes in the cluster, such that all the nodes in the cluster are aware of the status information of all other nodes. One of the nodes in the cluster would be designated as a master node. The master node would be assigned an IP address as an authoritative name server, and as such would receive DNS queries for the domain. The master node would select one of the nodes in the cluster to communicate with the client as a result of the DNS query, using the status information of each of the nodes to balance the load on the nodes. The master node would communicate the IP address of the selected node.

The invention relates to a low-carbon dispatching method and device for an electric power system based on large-scale wind power grid connection. The low-carbon dispatching method comprises the following steps of: (1) collecting power grid data of a given power grid system in the next dispatching cycle by a dispatching system of the electric power system; (2) capturing active load distribution values of a wind power farm and each generator by a low-carbon dispatching system according to the power grid data collected by the dispatching system of the electric power system; (3) making a new power generation executing plan by the dispatching system of the electric power system according to the active load distribution values of the wind power farm and the generators, which are captured by the low-carbon dispatching system; and (4) sending the new power generation executing plan, which is made by the dispatching center of the electric power system, to the wind power farm and a thermal power plant by a power generation executing system so as to execute the plan. The invention has the following advantages that the economy of power production is considered, and moreover, the protection of ecological environment is paid more attention to at the same time; and requirements for energy-saving and emission reduction are met, and low-carbon power production is promoted.

A wireless communication device for communicating in the near-field via active load modulation. The device including an antenna configured to receive a magnetic field, a recovery device configured to recover a clock from the magnetic field, and a multiplexer configured to receive the recovered clock and a reference clock, and to output one of the recovered clock and the reference clock based on a current operational state of the wireless communication device, The wireless communication device further including a shunt regulator configured to produce the active load modulation by modulating an impedance of the wireless communication device, a phase-locked loop (PLL) configured to receive one of the recovered clock and the reference clock and to utilize the received clock to control the active load modulation, and a driver configured to contribute to the active load modulation by adjusting an amplitude of a voltage across the antenna.

An apparatus and method for unilaterally loading a secure operating system within a multiprocessor environment are described. The method includes disregarding a received load secure region instruction when a currently active load secure region operation is detected. Otherwise, a memory protection element is directed, in response to the received load secure region instruction, to form a secure memory environment. Once directed, unauthorized read / write access to one or more protected memory regions are prohibited. Finally, a cryptographic hash value of the one or more protected memory regions is stored within a digest information repository as a secure software identification value. Once stored, outside agents may request access to a digitally signed software identification value in order to establish security verification of secure software within the secure memory environment.

A method for sending data by inductive coupling includes: extracting an antenna signal from an antenna circuit, extracting from the antenna signal a first periodic signal, producing a second periodic signal by way of a synchronous oscillator, placing the oscillator in a free oscillation mode and applying to the antenna circuit the second periodic signal, modifying the impedance of the antenna circuit, restoring the amplitude of the antenna signal, then resynchronizing the oscillator on the first periodic signal.

An organic light emitting display (OLED) device using a tiling technique including a system-on-panel (SOP)-type emission control driver. The emission control driver includes a shift register and a logical operation portion having a plurality of logic gates, each of which receives output signals from the shift register and performs a logical OR operation on the received signals. An active load of each of the logic gates is controlled using two output signals and two inverted output signals of two adjacent flip-flops. Also, each of the logic gates performs a logical OR operation on the two output signals of the two adjacent flip-flops and generates an emission control signal. The flip-flops and the logic gates of the emission control driver include positive channel metal oxide semiconductors (PMOS) transistors.

Provided is a method in which an excavation surface is scanned, the excavation surface shape is determined based on scanned excavation surface, an excavating path is identified from a mining excavation equipment, a volume of a material excavated by the mining excavation equipment is actively calculated based at least on the excavation surface shape and the excavating path of the mining excavating equipment, and a weight of the material excavated by the mining excavating equipment is actively calculated based on at least one density factor.

The invention discloses a device and a method for balancing an active load of a Docker container. The method comprises the following steps: receiving a to-be-executed application file and presetting to-be-executed application details; converting the to-be-executed application file into a Docker mirror image; executing an application starting command in the Docker mirror image; transmitting a registration request and registering an application to a distributed coordination server; acquiring registering information from the distributed coordination server, acquiring change data, corresponding to the container, of an application example, and analyzing the data; updating a configuration file to a general load balancer by configuring a template. According to the device and the method disclosed by the invention, a real-time active discovering and registering mechanism is realized; the general load balancer is adopted for providing services for a Docker container cluster.

Aspects of the present invention include an N-Node virtual link trunking (VLT) system comprising a set of N nodes collectively provide a logical fabric-level view that is consistent across the set of N nodes. Embodiments of the N-Node VLT system comprise a control plane mechanism to provide Layer 2 multipathing between access network devices (switches or servers) and the core network. The N-Node VLT system provides a loop-free topology with active-active load-sharing of uplinks from access to the core. Accordingly, the N-Node VLT system eliminates the disadvantage of Spanning Tree Protocol (STP) (active-standby links) by allowing link aggregation group (LAG) terminations on multiple separate distribution or core switches and also supporting a loop-free topology. Additional benefits of an N-Node VLT system include, but are not limited to, higher resiliency, improved link utilization, and improved manageability of the network.

To improve the display quality in the scanning of a dynamic drive system by effectively preventing the erroneous display of the display elements that are connected to the scanning electrodes during non-selection. The erroneous lighting cancel circuit 20 has a number of (or assemblies of) dummy diodes MD used for erroneous lighting prevention that is equal to the number of common lines CL, and along with the anode of each dummy diode MD0, MD1, MD2, MD3 being electrically connected to each corresponding common line CLO, CL1, CL2, CL3 by means of suitable wiring, the cathode of each dummy diode MD0, MD1, MD2, MD3 is electrically connected to a terminal of a reference potential (for example, ground potential) through the medium of a shared switch 22 and a constant current source circuit (active load) 24. The control signal SG reaches an active state (H level) only for a prescribed time during the scanning drive period for each horizontal scanning period, and the switch 22 is placed in the ON state. During this prescribed time, the positive charge that is present on each common line CLO, CL1, CL2, CL3 is discharged at a constant current to the ground side through the medium of each dummy diode MD0, MD1, MD2, MD3, the ON state of the switch 22, and the constant current source circuit 24.