Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
Hiro

48016 results about "Energy analysis" patented technology

In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed. The SI unit of energy is the joule, which is the energy transferred to an object by the work of moving it a distance of 1 metre against a force of 1 newton.

Electrosurgical instrument

A working end of a surgical instrument that carries first and second jaws for delivering energy to tissue. In a preferred embodiment, at least one jaw of the working end defines a tissue-engagement plane that contacts the targeted tissue. The cross-section of the engagement plane reveals that it defines (i) a first surface conductive portion or a variably resistive matrix of a temperature-sensitive resistive material or a pressure-sensitive resistive material, and (ii) a second surface portion coupled to a fixed resistive material that coupled in series or parallel to a voltage source together with the first portion. In use, the engagement plane will apply active Rf energy to ohmically heat the captured tissue until the point in time that a controller senses an electrical parameter of the tissue such as impedance. Thereafter, the controller switches energy delivery to the second surface portion that is resistively heated to thereby apply energy to tissue by conductive heat transfer.
Owner:ETHICON ENDO SURGERY INC

Electrosurgical system

An electrosurgical system has an electrosurgical generator and a bipolar electrosurgical instrument, the generator being arranged to perform a treatment cycle in which radio frequency energy is delivered to the instrument as an amplitude-modulated radio frequency power signal in the form of a succession of pulses characterized by periods of a least 100 milliseconds between successive pulses and by a predetermined pulse mark-to-space ratio. Energy delivery between pulses is substantially zero and the mark-to-space ratio is typically 1:4 or less. Each burst is of sufficiently high power to form vapor bubbles within tissue being treated and the time between successive pulses is sufficiently long to permit condensation of the vapor. The treatment cycles may each include an initial period and a subsequent period, the pulse duty cycle being increased or energy being delivered continuously in the subsequent period in order that tissue coagulation can be achieved quickly despite increasing tissue impedance.
Owner:GYRUS MEDICAL LTD

Method and apparatus for digital signal processing for radio frequency surgery measurements

A method and apparatus for calculating current lost through a patient during a treatment of a patient using an electromagnetic energy delivery system is disclosed. The system generates electromagnetic energy, contacts a skin surface of the patient, transfers the electromagnetic energy to tissue beneath the surface of the skin, detects a value of at least one characteristic of the electromagnetic energy utilizing synchronous undersampling, and calculates the current lost through the patient. The characteristic measured may be a value of current of the electromagnet energy. An adjustable matching network may be utilized to maximize power to the tissue of the patient. Values of the impedance of the matching network may be utilized to determine the electromagnetic energy delivered to the tissue of the patient. A current correction factor is determined from the impedance of the matching network and utilized to calculate the current lost through the patient.
Owner:THERMAGE INC

System, method, and architecture for dynamic server power management and dynamic workload management for multi-server environment

Network architecture, computer system and / or server, circuit, device, apparatus, method, and computer program and control mechanism for managing power consumption and workload in computer system and data and information servers. Further provides power and energy consumption and workload management and control systems and architectures for high-density and modular multi-server computer systems that maintain performance while conserving energy and method for power management and workload management. Dynamic server power management and optional dynamic workload management for multi-server environments is provided by aspects of the invention. Modular network devices and integrated server system, including modular servers, management units, switches and switching fabrics, modular power supplies and modular fans and a special backplane architecture are provided as well as dynamically reconfigurable multi-purpose modules and servers. Backplane architecture, structure, and method that has no active components and separate power supply lines and protection to provide high reliability in server environment.
Owner:HURON IP

Optimized energy management system

Methods and systems are provided for optimizing the control of energy supply and demand. An energy control unit includes one or more algorithms for scheduling the control of energy consumption devices on the basis of variables relating to forecast energy supply and demand. Devices for which energy consumption can be scheduled or deferred are activated during periods of cheapest energy usage. Battery storage and alternative energy sources (e.g., photovoltaic cells) are activated to sell energy to the power grid during periods that are determined to correspond to favorable cost conditions.
Owner:GRIDPOINT

Bipolar electrosurgical sealing instrument having an improved tissue gripping device

A bipolar electrosurgical instrument has inner and outer members each having a respective jaw member disposed at a distal end thereof. Each jaw members has right and left side surfaces and seal surface. The seal surfaces are adapted to connect to an electrical energy source such that the seal surfaces are capable of conducting bipolar energy therebetween. The inner and outer members are movable from a first position where the jaw members are disposed in spaced relation relative to one another to a second position where the jaw members are closer to one another for grasping tissue. The instrument further has a first gripping device disposed on at least one of the right and left side surfaces of one of the jaw members. The first gripping device includes tines extending therefrom dimensioned to engage and hold tissue when the jaw members are moved from the first position to the second position.
Owner:SHERWOOD SERVICES AG

System and method for participation in energy-related markets

A multidimensional energy decision system, comprising a plurality of server systems, including at least a statistics server and an interface adapted to receive and send digital information from at least a client system, and further adapted to optionally communicate with the digital exchange via a packet-based data network, wherein the multidimensional energy decision system periodically optimizes operational parameters of client system for a specific time period and a specific energy asset from client system based on forecasted conditions, and directly, or upon decision confirmation from a client system, procures or makes dispatchable energy resources, related externalities, or related derivative financial products, available to a digital exchange or other parties, wherein upon the purchase of a listed asset by another party or across digital exchange, implements dispatch procedures to satisfy the issued contract and, optionally, provides monitoring and verification of performance, is disclosed.
Owner:CRABTREE JASON +6

System and method of controlling an HVAC system

A system and method manage delivery of energy from a distribution network to one or more sites. Each site has at least one device coupled to the distribution network. The at least one device controllably consumes energy. The system includes a node and a control system. The node is coupled to the at least one device for sensing and controlling energy delivered to the device. A control system is coupled to the node and distribution network for delivering to the node at least one characteristic of the distribution network. The node for controls the supply of energy to the device as a function of the at least one characteristic.
Owner:EHLERS GREGORY A +1

Rapid discrimination preambles and methods for using the same

A system, method and program are disclosed for achieving rapid bit synchronization in low power medical device systems. Messages are transmitted via telemetry between a medical device and a communication device. The synchronization scheme uses a portion of a unique preamble bit pattern to identify the communication device allowing for economical communications with a minimum expenditure of energy. A special set of preamble bit patterns are utilized for their unique synchronization properties making them particularly suited for rapid bit synchronization. These unique preamble bit patterns further provide simplification to the preamble error detection logic.
Owner:MEDTRONIC MIMIMED INC

Electroactive polymer-based articulation mechanism for circular stapler

Methods and devices are provided for actuating and / or articulating a circular stapler. In one exemplary embodiment, a circular stapler is provided having an elongate shaft with a stapling apparatus coupled thereto. An electrically expandable and contractible actuator, such as an electroactive polymer actuator, can be used to pivotally or angularly adjust a position of the stapling apparatus relative to the elongate shaft by delivering energy to the electroactive polymer actuator. In another embodiment, an electroactive polymer actuator can be used to actuate the stapling apparatus, thereby driving one or more staples, preferably in a substantially curved pattern, into tissue. The actuator can alternatively or additionally drive a blade distally to cut tissue being stapled.
Owner:CILAG GMBH INT

Apparatus and methods for dilating and modifying ostia of paranasal sinuses and other intranasal or paranasal structures

Sinusitis and other disorders of the ear, nose and throat are diagnosed and / or treated using minimally invasive approaches with flexible or rigid instruments. Various methods and devices are used for remodeling or changing the shape, size or configuration of a sinus ostium or duct or other anatomical structure in the ear, nose or throat; implanting a device, cells or tissues; removing matter from the ear, nose or throat; delivering diagnostic or therapeutic substances or performing other diagnostic or therapeutic procedures. Introducing devices (e.g., guide catheters, tubes, guidewires, elongate probes, other elongate members) may be used to facilitate insertion of working devices (e.g. catheters e.g. balloon catheters, guidewires, tissue cutting or remodeling devices, devices for implanting elements like stents, electrosurgical devices, energy emitting devices, devices for delivering diagnostic or therapeutic agents, substance delivery implants, scopes etc.) into the paranasal sinuses or other structures in the ear, nose or throat.
Owner:ACCLARENT INC

Devices, systems and methods for diagnosing and treating sinusitus and other disorders of the ears, nose and/or throat

Sinusitis, enlarged nasal turbinates, tumors, infections, hearing disorders, allergic conditions, facial fractures and other disorders of the ear, nose and throat are diagnosed and / or treated using minimally invasive approaches and, in many cases, flexible catheters as opposed to instruments having rigid shafts. Various diagnostic procedures and devices are used to perform imaging studies, mucus flow studies, air / gas flow studies, anatomic dimension studies, endoscopic studies and transillumination studies. Access and occluder devices may be used to establish fluid tight seals in the anterior or posterior nasal cavities / nasopharynx and to facilitate insertion of working devices (e.g., scopes, guidewires, catheters, tissue cutting or remodeling devices, electrosurgical devices, energy emitting devices, devices for injecting diagnostic or therapeutic agents, devices for implanting devices such as stents, substance eluting devices, substance delivery implants, etc.
Owner:ACCLARENT INC

Method of interference management for interference/collision avoidance and spatial reuse enhancement

A method called the evolvable interference management (EIM) method is disclosed in this patent for avoiding interference and collision and increasing network throughput and energy efficiency in wireless networks. EIM employs sensitive CSMA / CA, patching approaches, interference engineering, differentiated multichannel, detached dialogues, and / or spread spectrum techniques to solve the interference and QoS problems. EIM-based protocols can considerably increase network throughput and QoS differentiation capability as compared to IEEE 802.11e in multihop networking environments. Due to the improvements achievable by EIM, the techniques and mechanisms presented in this application may be applied to obtain an extension to IEEE 802.11 to better support differentiated service and power control in ad hoc networks and multihop wireless LANs. New protocols may also be designed based on EIM.
Owner:YEH CHIHSIANG

Method and apparatus for delivering energy to an electrical or electronic device via a wireless link

A method and apparatus for providing power to e.g., a chargeable device via a radio frequency link. In one aspect, a method of providing power to a chargeable device via radio frequency link comprises generating a substantially un-modulated signal. The method further comprises radiating a substantially un-modulated radio frequency (RF) signal to the chargeable device via a transmit antenna based on the substantially un-modulated signal. The method further comprises powering or charging the chargeable device with power delivered by the substantially un-modulated RF signal.
Owner:QUALCOMM INC

System and apparatus for transmitting a surface wave over a single conductor

A low attenuation surface wave transmission line system for launching surface waves on a bare and unconditioned conductor, such as are found in abundance in the power transmission lines of the existing power grids. The conductors within the power grid typically lack dielectric and special conditioning. Accordingly, the present invention includes a first launcher, preferably including a mode converter and an adapter, for receiving an incident wave of electromagnetic energy and propagating a surface wave longitudinally on the power lines. The system includes at least one other launcher, and more likely a number of other launchers, spaced apart from one another along the constellation of transmission lines. The system and associated electric fields along any given conductor are radially and longitudinally symmetrical.
Owner:CORRIDOR SYST INC

System and method for electric grid utilization and optimization

A system for electric grid utilization and optimization, comprising a communications interface executing on a network-connected server and adapted to receive information from a plurality of iNodes, the plurality of iNodes comprising a source iNode, a sink iNode, and a plurality of transmission or distribution iNodes, an event database coupled to the communications interface and adapted to receive events from a plurality of iNodes via the communications interface, a modeling server coupled to the communications interface, and a statistics server coupled to the event database and the modeling server, wherein the modeling server, on receiving a request to establish an allocation of at least one of transmission losses, distribution losses, and ancillary services to a specific sink iNode, computes at least one virtual path for flow of electricity between a source iNode and the specific sink iNode and wherein the modeling server further computes, for each transmission or distribution iNode included in the computed virtual path, at least one energy loss and allocates a portion thereof to the specific sink iNode, is disclosed.
Owner:CRABTREE JASON +4

Ablation system with feedback

Devices, systems and methods are disclosed for the ablation of tissue and treatment of cardiac arrhythmia. An ablation system includes an ablation catheter that has an array of ablation elements and a location element, an esophageal probe also including a location element, and an interface unit that provides energy to the ablation catheter. The distance between the location elements, determined by calculating means of the system, can be used by the system to set or modify one or more system parameters.
Owner:MEDTRONIC ABLATION FRONTIERS

Gas separation type showerhead

Provided is a gas separation type showerhead for effective energy supply. The gas separation type showerhead includes: a gas supply module to which a first gas and a second gas are separately supplied; a gas separation module in which the supplied first and second gases are separately dispersed; and a gas injection module which is a multi-hollow cathode having a plurality of holes and in which the first and second gases separately dispersed are ionized in the holes to be commonly dispersed.
Owner:ATO

Multicarrier Sub-Layer for Direct Sequence Channel and Multiple-Access Coding

Carrier Interferometry (CI) provides wideband transmission protocols with frequency-band selectivity to improve interference rejection, reduce multipath fading, and enable operation across non-continuous frequency bands. Direct-sequence protocols, such as DS-CDMA, are provided with CI to greatly improve performance and reduce transceiver complexity. CI introduces families of orthogonal polyphase codes that can be used for channel coding, spreading, and / or multiple access. Unlike conventional DS-CDMA, CI coding is not necessary for energy spreading because a set of CI carriers has an inherently wide aggregate bandwidth. Instead, CI codes are used for channelization, energy smoothing in the frequency domain, and interference suppression. CI-based ultra-wideband protocols are implemented via frequency-domain processing to reduce synchronization problems, transceiver complexity, and poor multipath performance of conventional ultra-wideband systems. CI allows wideband protocols to be implemented with space-frequency processing and other array-processing techniques to provide either or both diversity combining and sub-space processing. CI also enables spatial processing without antenna arrays. Even the bandwidth efficiency of multicarrier protocols is greatly enhanced with CI. CI-based wavelets avoid time and frequency resolution trade-offs associated with conventional wavelet processing. CI-based Fourier transforms eliminate all multiplications, which greatly simplifies multi-frequency processing. The quantum-wave principles of CI improve all types of baseband and radio processing.
Owner:GENGHISCOMM HLDG

Devices and methods for pyloric anchoring

ActiveUS20050055039A1Avoiding erosion and ulcerationSuture equipmentsElectrotherapyPylorusPatient characteristics
A device for performing one or more functions in a gastrointestinal tract of a patient includes an anchoring member and at least one actuator, sensor, or combination of both coupled with the anchoring device. The anchoring device is adapted to maintain at least part of the device within a pyloric portion of the patient's stomach and to intermittently engage, without directly attaching to, stomach tissue. Actuators perform any suitable function, such as transmitting energy to tissue, acting as a sleeve to reduce nutrient absorption, occupying space in the stomach, eluting a drug and / or the like. Sensors may be adapted to sense any suitable patient characteristic within the patient's gastrointestinal tract, such as pH, temperature, bile content, nutrient content, fats, sugars, alcohol, opiates, drugs, analytes, electrolytes and / or hemoglobin.
Owner:BARONOVA

Wireless energy transfer for photovoltaic panels

Described herein are improved configurations for a wireless power transfer involving photovoltaic panels. Described are methods and designs that use electric energy from a photovoltaic module to energize at least one wireless energy source to produce an oscillating magnetic field for wireless energy transfer. The source may be configured and tuned to present an impedance to a photovoltaic module wherein said impedance enables substantial extraction of energy from said photovoltaic module.
Owner:WITRICITY CORP

Harvesting ambient radio frequency electromagnetic energy for powering wireless electronic devices, sensors and sensor networks and applications thereof

ActiveUS20070109121A1Facilitates transmission of wireless signalFacilitates local and remote distributionBatteries circuit arrangementsFrequency-division multiplex detailsElectrical batteryThe Internet
A system and device for harvesting various frequencies and polarizations of ambient radio frequency (RF) electromagnetic (EM) energy for making a passive sensor (tag) into an autonomous passive sensor (tag) adapted to collect and store data with time-stamping and some primitive computation when necessary even when an interrogating radio frequency identification (RFID) reader is not present (not transmitting). A specific source of ambient RF EM energy may include wireless fidelity (WiFi) and / or cellular telephone base stations. The system and device may also allow for the recharging of energy storage units in active and battery assisted passive (BAP) devices. The system could be a “smart building” that uses passive sensors with RF EM energy harvesting capability to sense environmental variables, security breaches, as well as information from “smart appliances” that can be used for a variety of controls and can be accessed locally or remotely over the Internet or cellular networks.
Owner:COHEN MARC HARRY

Apparatus and method to classify sound to detect speech

Audio frames are classified as either speech, non-transient background noise, or transient noise events. Probabilities of speech or transient noise event, or other metrics may be calculated to indicate confidence in classification. Frames classified as speech or noise events are not used in updating models (e.g., spectral subtraction noise estimates, silence model, background energy estimates, signal-to-noise ratio) of non-transient background noise. Frame classification affects acceptance / rejection of recognition hypothesis. Classifications and other audio related information may be determined by circuitry in a headset, and sent (e.g., wirelessly) to a separate processor-based recognition device.
Owner:INTERMEC IP

Method and apparatus for digital signal processing for radio frequency surgery measurements

A method and apparatus for calculating current lost through a patient during a treatment of a patient using an electromagnetic energy delivery system is disclosed. The system generates electromagnetic energy, contacts a skin surface of the patient, transfers the electromagnetic energy to tissue beneath the surface of the skin, detects a value of at least one characteristic of the electromagnetic energy utilizing synchronous undersampling, and calculates the current lost through the patient. The characteristic measured may be a value of current of the electromagnet energy. An adjustable matching network may be utilized to maximize power to the tissue of the patient. Values of the impedance of the matching network may be utilized to determine the electromagnetic energy delivered to the tissue of the patient. A current correction factor is determined from the impedance of the matching network and utilized to calculate the current lost through the patient.
Owner:THERMAGE INC
Who we serve
  • R&D Engineer
  • R&D Manager
  • IP Professional
Why Patsnap Eureka
  • Industry Leading Data Capabilities
  • Powerful AI technology
  • Patent DNA Extraction
Social media
Patsnap Eureka Blog
Learn More
PatSnap group products