40results about How to "Electronics Simplified" patented technology

The invention is related to electronic devices (1), preferably cell phones or handhelds, containing a layer (2) and a moving mechanism for this layer (2), so that the layer (2) is extractable out of a rest position from the main casing (10). The described layer (2) usually contains a keypad (3). According to the invention, the moving mechanism allows the layer (2) to be extractable out of his rest position in different directions, preferably in two, three, or four directions. The inventive arrangement allows a more comfortable and flexible use of the device.

A PCB mountable module includes logic circuitry that translates between serial and wireless communication protocols. Supported standards include I2C, CAN, ProfiBus, SPI, and USB, IP, ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP. Modules can optionally provide security, MILARRS functionality, and web related services such as email alert. The novel modules can be used wherever a device designer wants a plug-in (or “drop-in”) system that obviates the need for independent development and maintenance of wireless capability. Examples include servers, desktop and laptop computers, and even devices such as kitchen appliances with relatively simpler electronics.

The invention relates to a device for controlling a ventilation device for a motor vehicle interior (36), comprising at least one air quality sensor (46) for generating an air quality signal of the air supplied to the air quality sensor (46), an actuator for adjusting an air damper (20a, 20b) of the ventilation device as a function of the air quality signal, and a ventilator (14) for transporting the air through the ventilation device into the motor vehicle interior (36). The air quality sensor (46) and the ventilator (14) form a structural unit (44).

A signal repeater, a system utilizing one or more signal repeaters, and a method fordetecting a transient disturbance in the surface charge on drill pipe, which system, apparatus and method are collectively used to transfer data from deep-well and high-conductivity formation subterranean environments to a point nearer to the surface. The signal repeater comprises a housing that is securably mountable to the interior of a pipe-string disposed in a wellbore, which repeater receives and stores electrical signals for resending at an appropriate time.

A tandem linear ion trap and time-of-flight mass spectrometer, where the ion trap has a straight central axis orthogonal to the flight path of the mass spectrometer. The ion trap comprises a set of electrodes, (401, 403, 402, 404) at least one of the electrodes has a slit for ejecting ions towards the mass spectrometer; a set of DC voltage supplies (+V, −V, V1, V2) to provide discrete DC levels and a number of fast electronic switches (409) for connecting / disconnecting the DC supplies to at least two of the electrodes; a neutral gas filling the ion trap and a digital controller to provide a switching procedure of ion trapping, manipulation with ions, cooling and including a state at which all ions are ejected from the ion trap towards the mass spectrometer.

A giant magnetoresistive flux focusing eddy current device effectively detects deep flaws in thick multilayer conductive materials. The probe uses an excitation coil to induce eddy currents in conducting material perpendicularly oriented to the coil's longitudinal axis. A giant magnetoresistive (GMR) sensor, surrounded by the excitation coil, is used to detect generated fields. Between the excitation coil and GMR sensor is a highly permeable flux focusing lens which magnetically separates the GMR sensor and excitation coil and produces high flux density at the outer edge of the GMR sensor. The use of feedback inside the flux focusing lens enables complete cancellation of the leakage fields at the GMR sensor location and biasing of the GMR sensor to a location of high magnetic field sensitivity. In an alternate embodiment, a permanent magnet is positioned adjacent to the GMR sensor to accomplish the biasing. Experimental results have demonstrated identification of flaws up to 1 cm deep in aluminum alloy structures. To detect deep flaws about circular fasteners or inhomogeneities in thick multilayer conductive materials, the device is mounted in a hand-held rotating probe assembly that is connected to a computer for system control, data acquisition, processing and storage.

An ergonomic auto emergency tool for alternatively functioning as a flashlight, a seat belt cutter and a motor vehicle window glass breaker. The auto emergency tool includes a main portion and a projecting portion extending from a joining portion and being integral with the main portion, and defining a seat belt-receiving notch therebetween. A knife blade extends across the notch proximate the joining portion. An inner main portion-facing upper surface of the projecting portion has a gentle curve for facilitating the movement of the tool towards and through a seat belt, and the bottom outer surface of the projecting portion is curved for both easy handling and for enabling a firm grip when the tool is used to break window glass. The window-breaking mechanism includes a depressible plunger cover for releasing a spring-loaded impact member.

A device and method for determining at least the left ventricular end diastolic volume LVEDV of a beating heart of in particular a human being, is disclosed, the device comprising a current source supply electrodes, for supplying alternating current to the body, measuring electrodes, for receiving an impedance signal, measuring means, for measuring said impedance signal, a processing unit, for processing and outputting the value of said impedance signal and the first time derivative thereof, and means for determining the duration DFT of a heartbeat, and wherein the processing unit is designed for determining and outputting the value of LVEDV in dependence of both said duration DFT and said impedance and the change of the first time derivative of said impedance during the pre-ejection period.

A method and a device are provided for reading a matrix of photonic detectors which delivers a current whose intensity varies according to the incident flux. A set of elementary points (PEL(i,j)) enables the signals delivered by each detector to be read. The quantity processed is the charge. Each elementary point effects a preintegration of the current delivered by a corresponding detector. A charge amplifier effects a reading to condition the signals delivered by the matrix of detectors and to multiplex them to at least one information processing chain.

A device for detecting an acceleration in one direction and a speed of rotation along one direction, including a support and two structures mechanically coupled to each other in opposite phase and suspended relative to the support, each of the structures including: an excitation mass; an excitation mechanism configured to move the excitation mass in a given direction; an inertial mass suspended to the excitation mass; a detector connected to the inertial mass to be displaced by same, and the detector connected to the support; a mechanism for detecting displacement of the inertial mass; and a controller controlling the excitation mechanism and processing signals delivered by the detecting mechanism.

Portable laser hair removal of multi purpose use comprising a housing (2) with a head (11) and transparent dome (3) with bottom hole (4) having a laser illumination system with two diodes (5, 6), different in wavelength, power, opening, pulse period and average power pulse size in red and infrared, respectively.

The invention is related to electronic devices (1), preferably cell phones or handhelds, containing a layer (2) and a moving mechanism for this layer (2), so that the layer (2) is extractable out of a rest position from the main casing (10). The described layer (2) usually contains a keypad (3). According to the invention, the moving mechanism allows the layer (2) to be extractable out of his rest position in different directions, preferably in two, three, or four directions. The inventive arrangement allows a more comfortable and flexible use of the device.

A thickness shear mode (TSM) sensor having a visco-elastic polymer coating and a fundamental frequency greater than 20 MHz useful for organic vapor or gas detection. The TSM quartz resonators at a fundamental frequency of 96 MHz were evaluated for their performance in organic vapor sensing applications and results were compared with the performance of 10 and 20 MHz resonators. These devices were produced by chemical milling of AT-cut quartz. Seven test organic vapors were utilized at concentrations ranging from 0.2 volume percent to 13.7 volume percent in the vapor phase. In all cases, the rubbery polymer polyisobutylene was used as a sensing layer. Detailed results for various sensor parameters such as sensitivity, baseline noise and drift, limit of detection, response and recovery times, dynamic range, and repeatability for the 96 MHz device were compared with those for 10 and 20 MHz devices. The test case of benzene / polyisobutylene was chosen to make these detailed comparisons. The 96 MHz device was found to be more sensitive than the lower frequency devices. Device sensitivity was dependent on the benzene concentration. Response and recovery times were smaller for the 96 MHz device. Response times decreased with analyte concentration. Sensor response was in reasonable agreement with the perturbation model of Sauerbrey at lower concentrations and deviated at the higher concentrations for the 96 MHz device. Higher frequency TSM devices can be very useful as organic vapor sensors both in detection and process monitoring applications. These devices have the advantages of simpler electronics, easier design and fabrication, well-developed models and good baseline stability when compared to other acoustic wave devices.

A stepper motor has a rotor, a stator and an electro-magnetic brake. The rotor has permanent magnet rotor poles. The stator has a stator winding with at least 2 phases. The brake is electrically connected to the phases of the stator winding and arranged to be released when at least one of the phases is energized.

A thickness shear mode (TSM) sensor having a visco-elastic polymer coating and a fundamental frequency greater than 20 MHz useful for organic vapor or gas detection. The TSM quartz resonators at a fundamental frequency of 96 MHz were evaluated for their performance in organic vapor sensing applications and results were compared with the performance of 10 and 20 MHz resonators. These devices were produced by chemical milling of AT-cut quartz. Seven test organic vapors were utilized at concentrations ranging from 0.2 volume percent to 13.7 volume percent in the vapor phase. In all cases, the rubbery polymer polyisobutylene was used as a sensing layer. Detailed results for various sensor parameters such as sensitivity, baseline noise and drift, limit of detection, response and recovery times, dynamic range, and repeatability for the 96 MHz device were compared with those for 10 and 20 MHz devices. The test case of benzene / polyisobutylene was chosen to make these detailed comparisons. The 96 MHz device was found to be more sensitive than the lower frequency devices. Device sensitivity was dependent on the benzene concentration. Response and recovery times were smaller for the 96 MHz device. Response times decreased with analyte concentration. Sensor response was in reasonable agreement with the perturbation model of Sauerbrey at lower concentrations and deviated at the higher concentrations for the 96 MHz device. Higher frequency TSM devices can be very useful as organic vapor sensors both in detection and process monitoring applications. These devices have the advantages of simpler electronics, easier design and fabrication, well-developed models and good baseline stability when compared to other acoustic wave devices.

An inductive power transmitter device (1) for inductively providing power to a mobile device provided with a receiver coil unit is disclosed. The transmitter device comprises a holder (3) and a coil arrangement (11). The holder (3) has a cavity (5) defined by two walls (7a,7b) providing facing surfaces (9a,9b), wherein the cavity is configured for receiving the mobile device between these facing surfaces. The coil arrangement (11) has two transmitter coil units (13a, 13b), wherein one of these coil units is arranged into one of said walls and the other of these transmitter coil units is arranged into the other of said walls, and wherein each of the coil units is configured for inductively coupling to the receiver coil unit of the mobile device when inserted into the cavity of the holder. These features allow a user to connect the mobile device to the transmitter device without being worried about the right position of the mobile device.

A method associated with a UWB RFID system provides for receiving a data transmission transmitted using UWB and accessing data within the data transmission using a communications protocol. An initial portion of the data transmission defines a structure of the data transmission such that subsequent data in the data transmission is directly accessible without additional decoding.

An inkjet system including a printhead with an ink-fillable chamber operatively connected to a piezoelectric actuator and provided with a nozzle for the ejection of ink drops in response to the energization of the actuator, which actuator is connected to a measuring circuit for measuring an electrical signal generated by the actuator in response to the deformation thereof, wherein the system is configured such that a natural frequency of said system corresponds substantially to a natural frequency of a disturbance in the system.

An actuator with a planetary screw drive (PSD), in particular to operate a clutch of a vehicle, wherein a centric spindle having a pitch is connected non-rotatingly to a rotor of a drive and is drivable by the drive around an axis of rotation, and a plurality of planetary rollers are engaged with the spindle and mesh with a ring gear encircling the planetary rollers which has grooves in the circumferential direction, wherein both ends of the planetary rollers are positioned in a planetary roller carrier. The planetary roller carriers are supported non-rotatingly on both ends in such a way that a fixed assignment of the pitch of the spindle to an axial travel of a component that is movable axially by the PSD, which is operatively connected to an axially actuatable piston, is realized.

A signal repeater, a system utilizing one or more signal repeaters, and a method for detecting a transient disturbance in the surface charge on drill pipe, which system, apparatus and method are collectively used to transfer data from deep-well and high-conductivity formation subterranean environments to a point nearer to the surface. The signal repeater comprises a housing that is securably mountable to the interior of a pipe-string disposed in a wellbore, which repeater receives and stores electrical signals for resending at an appropriate time.

An inductive power transmitter device provides power to a mobile device with a receiver coil. The transmitter device comprises a holder and a coil arrangement. The holder has a cavity defined by two walls, where the cavity is configured for receiving the mobile device between those surfaces. The coil arrangement has two transmitter coil units, where one of the coil units is arranged into one of the walls and the other transmitter coil unit is arranged into the other wall. Each of the coil units is configured for inductively coupling to the receiver coil of the mobile device when inserted into the cavity of the holder.

A portable modular NMR-DMF system for performing chemical / biological assays. The system comprises a PCB having an NMR electronic circuit thereon, wherein the NMR electronic circuit includes a figure-8 shaped RF coil generating a plane-parallel magnetic field. A planar DMF chip comprises a platform comprising an array of electrodes, the array of electrodes including a sensing site located under the figure-8 shaped RF coil. A portable magnet is disposed parallel to the DMF chip and the RF coil. The array of electrodes is configured to receive a sample under detection, move the sample along the array, mix the sample with a probe in the form of at least one droplet with target-specific nanoparticles, and move the mixed sample to the sensing site. A magnetic field corresponding to the mixed sample under detection is produced at the sensing site. The figure-8 shaped RF coil acts to transduce the magnetic field produced at the sensing site to a voltage signal. The NMR electronic circuit receives and processes the voltage signal to produce a resultant signal for analysis.

An actuator with a planetary screw drive (PSD), in particular to operate a clutch of a vehicle, wherein a centric spindle having a pitch is connected non-rotatingly to a rotor of a drive and is drivable by the drive around an axis of rotation, and a plurality of planetary rollers are engaged with the spindle and mesh with a ring gear encircling the planetary rollers which has grooves in the circumferential direction, wherein both ends of the planetary rollers are positioned in a planetary roller carrier. The planetary roller carriers are supported non-rotatingly on both ends in such a way that a fixed assignment of the pitch of the spindle to an axial travel of a component that is movable axially by the PSD, which is operatively connected to an axially actuatable piston, is realized.

Regulating body for a wristwatch, comprising: a generator provided with a rotor and a stator with M+N coils, M being a whole number higher than, or equal to, 1; and an electronic regulating circuit having a first load impedance with an adjustable value for adjusting the current in N of said M+N coils, and therefore the rotational speed of the rotor. Only a limited number of coils is therefore used for the braking, the other coils continuing to supply the electronic regulating circuit.

A portable apparatus for sensing position of an oil port on a rotating element (e.g. the wheel or track of a heavy vehicle) has a position sensor in electrical communication with a wireless transmitter. The wireless transmitter is configured to receive signals from the position sensor and to send signals to a wireless receiver. The apparatus further has a mounting structure (e.g. a magnet) for temporarily mounting the apparatus on the rotating element. An indicium on the apparatus associated with a desired service action to be performed on the rotating element correlates an angular position of the oil port to a pre-determined reference position of the position sensor, the angular position of the oil port being a correct position for performing the desired service action. In use, the apparatus is mounted on the rotating element so that the indicium points at the oil port and then the rotating element is rotated until the receiver indicates that the oil port is in the correct position.

The general field of the invention is that of systems for detecting the posture of a mobile object. The systems according to the invention comprise a fixed electro-optical device comprising an emission source and a photosensitive sensor. The optical corner cube is arranged on the mobile object. The entry face of the corner cube has a predetermined geometry, the light coming from the source and reflected back by the corner cube forming a luminous contour on the matrix sensor. The fixed electro-optical device comprises an optical element with a known shape and location, which is placed in the vicinity of the said source and is arranged so as to form a dark zone in the central part of the luminous contour. The detection system comprises analysis means determining the position and the orientation of the mobile object from knowledge of the vanishing points of the luminous contour and the position and shape of the dark zone.

A portable apparatus for sensing position of an oil port on a rotating element (e.g. the wheel or track of a heavy vehicle) has a position sensor in electrical communication with a wireless transmitter. The wireless transmitter is configured to receive signals from the position sensor and to send signals to a wireless receiver. The apparatus further has a mounting structure (e.g. a magnet) for temporarily mounting the apparatus on the rotating element. An indicium on the apparatus associated with a desired service action to be performed on the rotating element correlates an angular position of the oil port to a pre-determined reference position of the position sensor, the angular position of the oil port being a correct position for performing the desired service action. In use, the apparatus is mounted on the rotating element so that the indicium points at the oil port and then the rotating element is rotated until the receiver indicates that the oil port is in the correct position.

Current industrial and research applications that utilize resistance heating and temperature measurement require separate power and temperature connections, typically two for each. Such applications require separate assemblies and control. We describe herein a combined unit utilizing a thermocouple wire as one of its two leads. The resulting device requires only two connections and one control. An alternating cycle can be used to apply heating power, and temperature measurements are made during the power off portion of the cycle.