169 results about "Unison" patented technology

A system whereby a magnetic tip attached to a surgical tool is detected, displayed and influenced positionally so as to allow diagnostic and therapeutic procedures to be performed rapidly, accurately, simply, and intuitively is described. The tools that can be so equipped include catheters, guidewires, and secondary tools such as lasers and balloons, in addition biopsy needles, endoscopy probes, and similar devices. The magnetic tip allows the position and orientation of the tip to be determined without the use of x-rays by analyzing a magnetic field. The magnetic tip further allows the tool tip to be pulled, pushed, turned, and forcefully held in the desired position by applying an appropriate magnetic field external to the patient's body. A Virtual Tip serves as an operator control. Movement of the operator control produces corresponding movement of the magnetic tip inside the patient's body. Additionally, the control provides tactile feedback to the operator's hand in the appropriate axis or axes if the magnetic tip encounters an obstacle. The output of the control combined with the magnetic tip position and orientation feedback allows a servo system to control the external magnetic field by pulse width modulating the positioning electromagnet. Data concerning the dynamic position of a moving body part such as a beating heart offsets the servo systems response in such a way that the magnetic tip, and hence the secondary tool is caused to move in unison with the moving body part. The tip position and orientation information and the dynamic body part position information are also utilized to provide a display that allows three dimensional viewing of the magnetic tip position and orientation relative to the body part.

Content of multiple digital bit streams with essentially the same renderable content, and situated at mutually remote locations, are played back in unison. First, time is synchronized among the processors that participate in a synchronized viewing session by playing back respective streams. Second, the playbacks are content-wise aligned, by rewinding or fast forwarding, to effect overall a precisely synchronized presentation. The content-wise alignment is achieved by means of a status message between processors that contains information characteristic of the sender's bit stream. If any participant, performs a control function (e.g. rewind, fast forward, stop), all other participants follow synchronously. The processor that initiates the session is deemed the initiator, a role that is thereafter assumed by the participant that has last performed a control function. The initiator directs all participants, at session startup, upon execution of each control function, and periodically, to synchronize their playbacks to that of the initiator, whereby all playbacks are synchronized and maintain in synchronization.

A method of delivering audio and audio visual works to users of computer terminals includes the steps of: providing a data warehouse of digitized works; providing program means for end user computers to access, select and play at least one of the works; providing means for controlling end user access to the works and for collecting payment for playing at least one of the works; and diverting a portion of the payment for playing the at least one work to the holder of a copyright to the at least one work. The method preferably includes the additional steps of encrypting the works; and providing the end user with program means for deciphering the works. The method still further preferably includes additional the steps of delivering advertising matter to the end user with each work the end user selects and plays; keeping a record of the particular works each end user selects and plays; customizing advertising delivered to the end user to fit within any pattern of work selection by the particular end user. An apparatus for performing the method is also provided, including a computer hive made up of several inter-linked computers having specialized functions, the computers operating in unison to build a supercomputer that has shared disk space and memory, in which each node belongs to the collective and possesses its own business rules and membership to an organization managerial hierarchy.

A multi-antenna GNSS system and method provide earth-referenced GNSS heading and position solutions. The system and method compensate for partial blocking of the antennas by using a known attitude or orientation of the structure, which can be determined by an orientation device or with GNSS measurements. Multiple receiver units can optionally be provided and can share a common clock signal for processing multiple GNSS signals in unison. The system can optionally be installed on fixed or slow-moving structures, such as dams and marine vessels, and on mobile structures such as terrestrial vehicles and aircraft.

A system, and method of use thereof, that employs short distance communications signals, thereby limiting and localizing the dissemination area for such signals, for interactively coordinating crop material transfer operations between a harvester and a grain transport, including the automated conduct of an unloading operation, including commencement of the actual unloading of the grain through continuation of such unloading to termination of such unloading, which system and method of the present invention employs operating systems in the harvester and grain transport that so operate to become electronically linked to one another to thereafter operate in unison with one another to effect and control the conduct of the crop material transfer operation between the harvester and grain transport, with each of such operating systems having associated therewith a short range communications system for the transmission and receipt at close range of electronic data signals, such operating systems, when appropriately electronically linked to one another, being operable in conjunction with one another to exchange information, to maintain a communications link therebetween, and to automatedly coordinate and effect various activities of the harvester and grain transport as a crop material transfer operation is effected and proceeds.

A compression bone screw (100) comprises a shank (110), a first element (120) and a second element (130). The shank (110) has longitudinally opposing first and second shank portions (111, 112). The first shank portion (111) is externally threaded with a first shank thread (113). The first element (120) is threadingly mounted on the first shank portion (111) by way of a first element internal thread (122) threadingly engaging the first shank thread (113). The first element (120) is externally threaded with a first element external thread (123). The second element (130) is mounted on, or integrally formed with, the second shank portion (112). The second element (130) is externally threaded with a second element external thread (133). The second element external thread (133) and the first element external thread (123) are like-handed. The first shank portion (111) and the first element (120) are configured to operate in a first mode of operation in which the shank (110) and the first element (120) are rotationally driven in unison and a second mode of operation in which the shank (110) is rotationally driven independent of the first element (120), such that the first element (120) moves along the first shank portion (111) towards the second element (130).

A system and method are disclosed for inspecting a component having a length, a width, and an axis. The system includes a fixture for holding the component, a light source disposed on one side of the component, and an optical detector disposed on the other side of the component. In the preferred embodiment, the detector has a field of view wider than the width of the component, thereby enabling the detector to image a portion of the outer edges of the component. A translation stage is operative to move the light source and detector in unison along the length of the component and a processor, in communication with the detector and the translation stage, is operative to: a) receive electrical signals representative of the outer profile imaged by the detector; b) move the translation stage incrementally along the length of the component; and c) record the outer profile imaged by the detector at each increment and form a composite profile of the component. In the preferred embodiment, the processor is further operative to record the composite profile of the component at one or more angular orientations by rotating the component through a predetermined angle about its axis.

A fleet of vessels attached together longitudinally (rows), and transversely (columns) and operating in unison convert wave energy to electrical energy which is stored in either a chemical or electrical form. The vessels when detached from the fleet provide transportation to coastal or by navigable waterway ports of call for distribution to market centers. Both wind wave and swell wave energy conversion is performed by use of the differential motion between the vessels. Means are provided for the energy conversion systems to adapt to changes in wave direction, wave length, amplitude, and phase. Such vessels are self powered for off shore or inland waterway navigation, either singularly or in multiples, with which to deliver energy to other sea going vessels or to land based ports of call. Two or more of such vessels are capable of using the energy of waves during the delivery process. The fleet can maintain a designated geographical location by dynamic positioning. Alternatively, the fleet may maintain its designated position by moorage of a designated centrally located vessel in the fleet to a permanent anchoring system when operating at appropriate depths.

Visually encoded data is captured along with one or more visual elements, the encoded data is decoded and one composite view is displayed that incorporates information related to the decoding data, such as a decode confirmation or decoded data, and the visual elements. The recognition and decoding process may additionally provide for transforming the captured visual elements to accommodate the allocated display area of small sized display, such as the display associated with a handheld image capturing device. The invention is thus suited for capturing encoded data and branding elements, such as company or product logos, and displaying the branding elements in unison with data related to the decoded information.

A method and apparatus for treating a sample for acquiring high-definition magnetic resonance images (MRI images) or high resolution nuclear magnetic resonance (NMR) spectra even in the presence of magnetic field distortions within one or multiple scans. The spatial nature and temporal dependence of the field inhomogeneities are determined a priori using any of several literature procedures. A static or oscillating magnetic field gradient is applied on the sample so as to endow spins at different positions within the sample with different resonance frequencies. A phase- and amplitude-modulated radiofrequency (RF) pulse is applied in unison with the magnetic field gradient so as to endow spins at different positions within the sample with a homogeneous excitation / inversion profile. The nature of the spatially-selective RF irradiation is tailored in such a way that, when added on top of the effects of the inhomogeneities, the spins' evolution phases and their signal amplitudes at the time of the acquisition become independent of the inhomogeneities. The spin signals thus created are captured and decoded, so as to obtain the spins' response as if the inhomogeneity was not present. The collected data is processed to a suitable rearrangement and Fourier analysis procedure to retrieve a final undistorted image or spectrum. The magnetic field gradient can be oscillated to impose this kind of inhomogeneity corrections on multiple spatial dimensions sequentially, or simultaneously.

A radiant energy concentrating or collimating system comprising an enclosure that shields its contents from environmental effects while allowing radiant energy to transmit through its top window; a plurality of energy concentrating or collimating assemblies, each on its own pivot mechanism and each comprising a plurality of optics, a support structure and an energy conversion device that is mounted on a heat dissipating structure; a drive mechanism controlled by a microprocessor to rotate the said energy concentrating or collimating assemblies on two orthogonal axes in unison so the assemblies are oriented towards desired direction at any given time.

A microelectromechanical (MEM) optical switching apparatus is disclosed that is based on an erectable mirror which is formed on a rotatable stage using surface micromachining. An electrostatic actuator is also formed on the substrate to rotate the stage and mirror with a high angular precision. The mirror can be erected manually after fabrication of the device and used to redirect an incident light beam at an arbitrary angel and to maintain this state in the absence of any applied electrical power. A 1×N optical switch can be formed using a single rotatable mirror. In some embodiments of the present invention, a plurality of rotatable mirrors can be configured so that the stages and mirrors rotate in unison when driven by a single micromotor thereby forming a 2×2 optical switch which can be used to switch a pair of incident light beams, or as a building block to form a higher-order optical switch.

From ancient history until now, man has constructed high-rise buildings of various kinds. They include monuments, castles, churches, office buildings, hotels, hospitals and residences. No matter how sophisticated construction techniques and technology have become, there is no system to transport people and equipment to or from selected locations between the ground level and roof of a high-rise; quickly, economically, consistently and safely outside the structure. Reed's High-Rise Emergency Rescue Egress System is such a system. This system solves the myriad problems which have existed for centuries relating to a need for external, vertical high-rise emergency evacuation and does so with substantial cost-efficiencies. Reed's High-Rise Emergency Rescue Egress System is comprised of varied electronic and mechanical components operating in unison. The three major pieces to the high-rise system are; a vehicle, a gondola and a roof-mount cantilever: The vehicle is a self-powered ground vehicle containing a gondola, stabilizing steel cables, drums, television screens, video cameras, communications, and remote control equipment. Once linked to a cantilever it provides power for lifting the gondola, equipment and personnel to monitor all activities below, beside or above the fire area. The self-powered cantilever is, remotely or manually, positioned on the roof of a high-rise building to a desired area of operation. The cantilever extends its connection arm over the edge of a high-rise building and lower cables to the ground rescue vehicle to make necessary connections with the gondola for traveling up and down the walls of a high-rise building. The cantilever roof-mount system is portable and contains steel cables, electric / hydraulic wenches, radio receivers, transmitters and video communication. The gondola, an enclosed cabin, is positioned on the rear, body portion, of the high-rise rescue vehicle. Once the gondola is linked to the vehicle and cantilever arm it becomes an exterior enclosed transporter in a matter of minutes. Reed's High-Rise Emergency Rescue Egress gondola will carry up to eight fully equipped firemen and can scale the wall of a burning building in minutes. The gondola carries firefighters and equipment below, beside or above the fire, while at the same time providing trapped building occupants a safe means of escape. A modified version of the gondola is used for high-rise building construction and maintenance.

A temporary visible image, such as a first down reference line, corporate logo, or text is projected onto a target surface by an orientation-stabilized, fiber-fed laser projector. The projector may include at least one cylindrical lens or at least one pair of X-Y scanners. One or more remotely located lasers, supplying optical energy at a single wavelength to the projector, accommodate projection of a monochromatic line pattern. Multi-colored images are accommodated by supplying, to the projector, the output of a plurality of lasers operating at different wavelengths within the visible band. The projector is suspended and conveyed as a unitary assembly by a suspension system adapted to maintain the projectors angular orientation and dynamically stabilize the image. If desired, two or more independently-suspended projection modules or groups of modules adapted to move in unison or independently over the length of the field may be employed.

A method is disclosed for evaluating the vestibular function in a human subject. The subject is constrained in a substantially erect position so that the head moves in unison with the rest of the body. A controlled stimulus in the form of a sudden angular acceleration is imparted to the body, and the subject's ocular response to the controlled stimulus is measured. The vestibular function is evaluated from the ocular response and the angular velocity of the head.

An apparatus for measuring jaw motion has a pair of fixed marker attached to both sides of face of patient, a pair of movable markers disposed to face the fixed marker in a spaced distance and to move in unison with the movement of the lower jaw of patient, four cameras recording the three-dimensional movement of the movable marker relative to the fixed marker, as lower jaw moves, and personal computer for receiving and processing the image signals fed from connected cameras. The apparatus can accurately measure the location of the center of patient's jaw motion and the moving track thereof with stereo vision processing of the image signals obtained from camera.

A multi-antenna GNSS system and method provide earth-referenced GNSS heading and position solutions. The system and method compensate for partial blocking of the antennas by using a known attitude or orientation of the structure, which can be determined by an orientation device or with GNSS measurements. Multiple receiver units can optionally be provided and can share a common clock signal for processing multiple GNSS signals in unison. The system can optionally be installed on fixed or slow-moving structures, such as dams and marine vessels, and on mobile structures such as terrestrial vehicles and aircraft.

A re-fillable liquid spray dispenser useful as a fragrance atomizer includes a re-filling valve apparatus that is cooperative with a discharge nozzle of a liquid reservoir. A main chamber into which liquid may be filled in the spray dispenser is cyclically vented in unison with liquid injection through the re-filling valve apparatus. In this way, the liquid spray dispenser is accurately and efficiently vented during a liquid filling operation.

The invention relates to a system for real-time monitoring of motile lubricants within the presently common reciprocating engine. A sensor array is fully submerged (or partially submerged) within the lubricant system fluid, for example, oil. The fluid property monitoring is accomplished by multiple sensors acting in unison to provide data to a remote processing and display portion of the system. The system allows for the unified data acquisition and real-time comparison by providing both a physical sensor unit with embedded multiple sensors of multiple types as well as multiple DSP (Digital Signal Processing) or microcontroller modules acting in parallel to provide best-fit results for purposes of real-time monitoring high-temperature motile lubricants for property degradation (namely viscosity and foreign particulate detection) and particulate accumulation.

PROBLEM: Efficiently generating digital terrain model (DTM) having high elevation surface accuracy and high point density, and suitable for controlling pavement milling machines during road repairs. SOLUTION: Combination of motorized levelling and Stop-Go mobile laser scanning system, including train of three vehicles, which are at standstill during measurements, and which move in unison in between measurements. Middle vehicle carries laser scanner, elevation sight, and GNSS receiver. Front and rear vehicle each carry levelling rod; front vehicle also carries GNSS receiver. During measurement cycle, laser scanner generates point cloud, while GNSS positions of middle and front vehicles and elevations at the resp. positions of front and rear vehicles are determined. After measurement cycle, vehicle train moves until rear vehicle halts at previous GNSS position of front vehicle, etc. When all measurement cycles are completed, collected data is integrated and transformed into a DTM.

A portable electronic device (100) includes a vibrating transducer having a resilient support and a first mass supported by the first resilient support forming a mechanical resonator, and an electrical circuit coupled to the first vibrating transducer to apply a drive signal. A plurality of tactile vibration transducers (130, 140) can work in unison to produce strong tactile stimulus (216, 228, 230).

A curing system for printing of 3D objects having one or more sources of curing radiation moveably attached to and flanking at least one side of an extrusion head and extrusion nozzle wherein the extrusion head and extrusion nozzle and the at least one source of curing radiation act in unison as a single unit wherein curing of deposited curable material is applied concurrently with or immediately following deposition of the curable material.

An apparatus for measuring jaw motion has a pair of fixed marker attached to both sides of face of patient, a pair of movable markers disposed to face the fixed marker in a spaced distance and to move in unison with the movement of the lower jaw of patient, four cameras recording the three-dimensional movement of the movable marker relative to the fixed marker, as lower jaw moves, and personal computer for receiving and processing the image signals fed from connected cameras. The apparatus can accurately measure the location of the center of patient's jaw motion and the moving track thereof with stereo vision processing of the image signals obtained from camera.

A security bag includes a body having an interior for receiving articles, a closure attached to or formed integrally with the body and openable to gain access to the body interior and a pair of catches closing the closure to the body. A security device co-operates with each catch to enable the closure to be opened without sounding an alarm but only when both catches are operated in unison or within a predetermined time of one another. The security device also alerts the user when the bag is not properly closed.

A material-handling system and method includes at least one first processing station, each having an input and an output. A linear transfer system made up of a plurality of transfer units that travel in unison in a linear motion past the input and output of the first processing station(s) either receives articles from the output and discharges articles to the input or transfers articles between the first processing station and a second processing station. A control sequences articles between the transfer units and the first input and output or between the first processing station and a second processing station in a manner that enhances operation of the processing station(s).