185 results about "Acoustic response" patented technology

A noise canceling and communication system is described. An in-ear device is adapted to fit in the ear canal of a device user. A passive noise reduction element reduces external noise entering the ear canal. An external microphone senses an external acoustic signal outside the ear canal to produce a representative external microphone signal. An internal microphone senses an internal acoustic signal proximal to the tympanic membrane to produce a representative internal microphone signal. One or more internal sound generators produce a noise cancellation signal and an acoustic communication signal, both directed towards the tympanic membrane. A probe tube shapes an acoustic response between the internal sound generator and the internal microphone to be relatively constant over a wide audio frequency band. An electronics module is located externally of the ear canal and in communication with the in-ear device for processing the microphone signals using a hybrid feed forward and feedback active noise reduction algorithm to produce the noise cancellation signal. The noise reduction algorithm includes a modeling component based on a transfer function associated with the internal sound generator and at least one of the microphones to automatically adjust the noise cancellation signal for fit and geometry of the ear canal of the user. The communication component also includes a modeling component based on a transfer function associated with the internal sound generator and at least one of the microphones to automatically adjust the communication signal for fit and geometry of the ear canal of the user and to assure that the communication signal does not interfere with the noise reduction algorithm and that the noise cancellation signal does not interfere with passing of the communication signal.

An automated audio tuning system may optimize an audio system for power efficiency when performing automated tuning of the audio system to optimize acoustic performance. The system may establish any number of different power efficiency weighting factors to provide a balance between acoustic performance and power efficiency during operation. The power efficiency weighting factors may range from representing optimizing power efficiency with constrained optimization of acoustic performance to optimized acoustic performance with minimized regard for power efficiency. For each of the efficiency weighting factors, the system may generate operational parameters, such as filter parameters, to achieve a target acoustic response while maintaining a determined level of power efficiency.

An In The Ear (ITE) microphone improves the acoustic response of a Behind The Ear (BTE) Implantable Cochlear Stimulation (ICS) system during telephone use. An acoustic seal provided by holding a telephone earpiece against the ear provides improved coupling of low frequency (up to about 1 KHz) sound waves, sufficient to overcome losses due to the near field acoustic characteristics common to telephones. In a preferred embodiment, the ITE microphone is connected to a removable ear hook of the BTE ICS system by a short bendable stalk.

A system and method is provided for confirming the identity of a user, where the confirmation is made using biometric data. The system includes an internal speaker having an audio port, which is positioned within the ear of the user, and is adapted for producing a signal having one or more frequencies. The system further includes an internal microphone having an audio port, which is positioned within the ear of the user, and is adapted for detecting a resulting signal including the signal produced by the internal speaker and any corresponding signal reflections. A determination is then made as to whether the resulting signal detected by the internal microphone matches the corresponding predetermined expected signal, based upon a prestored hearing profile.

An acoustic borehole logging system for parameters of a well borehole environs. Full wave acoustic response of a scanning transducer is used to measure parameters indicative of condition of a tubular lining the well borehole, the bonding of the tubular to material filling an annulus formed by the outside surface of the tubular and the wall of the borehole, the distribution of the material filling the annulus, and thickness of the tubular. A reference transducer is used to correct measured parameters for variations in acoustic impedance of fluid filling the borehole, and for systematic variations in the response of the scanning transducer. Corrections are made in real time. The downhole tool portion of the logging system is operated essentially centralized in the borehole using a centralizer that can be adjusted for operation in a wide range of borehole sizes.

The invention provides a method for rapidly measuring a plurality of parameters of an electro-acoustic product and also provides a test system realizing the method. The method comprises the following steps: adopting a continuous logarithmic swept-frequency signal to stimulate an electro-acoustic component and collecting an acoustic response signal transmitted by the electro-acoustic component to be tested and a current response signal flowing through the electro-acoustic component to be tested; obtaining a frequency response curve and a phase curve after the acoustic response signal is filtered by an inverse filter, and calculating and obtaining a harmonic distortion curve after time domain processing is carried out on the frequency response curve; calculating and obtaining an impedance curve after inverse filter and time domain processing are carried out on the current response signal; and further analyzing a result curve and obtaining results, such as sensitivity, polarity, rated impedance, linear parameters and the like. The test system comprises a test instrument, an amplifier, a current measurement module and a microphone.

These objects are achieved by a method of acoustically inspecting a one-piece bladed wheel in which the wheel is driven in rotation; each blade of the wheel is subjected to mechanical excitation; its acoustic response is picked up and a corresponding electrical signal is generated; its frequency response is determined by computing a FFT; the electrical signal and the associated frequency response are stored; the characteristic frequencies of each blade of the wheel are identified; and a wheel is rejected or accepted depending on whether or not the frequency distribution obtained in this way matches a predetermined set of forbidden frequency distributions. Advantageously, an additional step is provided in which the defects of a blade are determined by comparing its frequency response with predetermined frequency responses that are characteristic of various types of defect.

The invention relates to a method for designing the automobile body acoustic vibration unevenness NVH based on a low frequency automobile acoustic sensitivity. The method comprises the following steps: firstly, establishing a body-in-white finite element modeling, and establishing an acoustic finite element modeling for a cab on the basis of the body finite element modeling; secondly, carrying the frequency response analysis on the positions of a suspending point of an engine on the automobile body, a suspension mounting point, an exhaust hanging point, and the like; thirdly, taking the vibration speed of a body wall plate obtained by the frequency response analysis as a boundary condition, and the sound pressure level beside ears of a driver by solving the acoustic response of the cab; further, the influence level of larger sheet metal parts and mounting points which have great influence on the sound pressure level are acquired by checking the vibration situation of the body wall plate displayed by the frequency response analysis result at higher sound pressure response frequency points, and analyzing the sheet metal contribution; and finally, amending the design proposal of the sheet metal parts and the design proposal of the local rigidity of the mounting points.

A noise canceling and communication system includes an in-ear device adapted to fit in the ear canal of a device user. A passive noise reduction element reduces external noise entering the ear canal. An external microphone senses an external acoustic signal outside the ear canal. An internal microphone senses an internal acoustic signal proximal to the tympanic membrane. One or more internal sound generators produce a noise cancellation signal and an acoustic communication signal, both directed towards the tympanic membrane. A probe tube shapes an acoustic response between the internal sound generator and the internal microphone to be relatively constant over a wide audio frequency band. An electronics module is located externally of the ear canal and in communication with the in-ear device for processing the microphone signals using a hybrid feed forward and feedback active noise reduction algorithm to produce the noise cancellation signal.

A pickup for use in a stringed musical instrument. The pickup includes a primary transducer that is sensitive to the motion of the musical instrument's strings and is mechanically coupled to the body of the musical instrument. The primary transducer senses the motion of the musical instrument's strings and generates a “string sound” signal in response. The primary transducer is further flexibly coupled to a secondary transducer that is not fixedly attached to the body of the musical instrument. Relative motion between the primary transducer and the secondary transducer generates a “body sound” signal within the secondary transducer. The string sound signal and the body sound signal are combined to generate a signal representing the acoustical response of the musical instrument.

Systems and methods for generating and monitoring an acoustic response to particular fluid flow conditions in a wellbore include incorporating a sound-producing element into each inflow control device installed in a wellbore. Each of the sound-producing elements generates an acoustic signature that is readily identifiable from each other sound-producing element installed in the wellbore.

A system and method are provided to measure relatively short distances between one or more moveable objects and with respect to an environment. The transponders may be affixed to other moveable objects and / or may be affixed in position within the environment. The transponders detect the query signal and respond with an acoustic response signal. A synchronized clock system establishes common timing between the transponders and the moveable objects such that the start time at which the acoustic response signal is sent is known. The moveable object detects a receipt time when the acoustic response signal is received. Knowing the start time and the receipt time, a transit time for the acoustic signal can be determined whereby a separation vector may be calculated. The system may be used to determine and transmit a table that contains the relative positions of all moveable objects in the environment.

These objects are achieved by a method of acoustically inspecting a one-piece bladed wheel in which the wheel is driven in rotation; each blade of the wheel is subjected to mechanical excitation; its acoustic response is picked up and a corresponding electrical signal is generated; its frequency response is determined by computing a FFT; the electrical signal and the associated frequency response are stored; the characteristic frequencies of each blade of the wheel are identified; and a wheel is rejected or accepted depending on whether or not the frequency distribution obtained in this way matches a predetermined set of forbidden frequency distributions. Advantageously, an additional step is provided in which the defects of a blade are determined by comparing its frequency response with predetermined frequency responses that are characteristic of various types of defect.

An input tool includes a body in the form of a stylus with plurality of vibro-acoustically distinct regions. The vibro-acoustically distinct regions produce vibro-acoustic responses when the regions touch the surface of the touch screen. The vibro-acoustic responses are used in a computing device to detect what region of the input tool was used.

A system and method for generating a masking noise level and spectrum automatically adjusted to obtain a target masking noise spectrum in a room. The system comprises a white noise generator and a mask filter automatically determined according to a correction of an acoustical response of the room and to the target masking noise corrected by an ambient noise.

Vibro-acoustic attenuation or reduced energy transmission. The present invention relates to devices that display frequency zones of strong vibro-acoustic attenuation or reduced energy transmission. This can be used in particular, although not necessarily solely, in applications that require lightweight materials with good mechanical properties and good vibro-acoustic response or in applications that require materials with high sound reflection, absorption or sound isolation in a certain frequency band.

Systems and methods which determine geologic properties using acoustic analysis are shown. Acoustic signals are collected during processing (e.g., crushing, shearing, striking, compressing, etc.) of geologic media, such as rock samples, for determining geologic properties according to embodiments. The acoustic signals collected may include frequency information, amplitude information, time information, etc. which may be utilized in determining geologic properties, such as geologic media properties (e.g., mineralogy, porosity, permeability, sealing capacity, fracability, compressive strength, compressibility, Poisson's Ratio, Youngs Modulus, Bulk Modulus, Shear Modulus), geologic structure properties (e.g., lithology, seal quality, reservoir quality), geologic acoustic properties (e.g., acoustic logging effectiveness, acoustic response, natural or harmonic frequencies, etc.). Embodiments may be used to provide determination of geologic properties from a variety of geologic media samples, such as cuttings, core samples, etc.

A system and method are provided to measure relatively short distances between one or more moveable objects and with respect to an environment. The transponders may be affixed to other moveable objects and / or may be affixed in position within the environment. The transponders detect the query signal and respond with an acoustic response signal. A synchronized clock system establishes common timing between the transponders and the moveable objects such that the start time at which the acoustic response signal is sent is known. The moveable object detects a receipt time when the acoustic response signal is received. Knowing the start time and the receipt time, a transit time for the acoustic signal can be determined whereby a separation vector may be calculated. The system may be used to determine and transmit a table that contains the relative positions of all moveable objects in the environment.

Vibro-acoustic attenuation or reduced energy transmission. The present invention relates to devices that display frequency zones of strong vibro-acoustic attenuation or reduced energy transmission. This can be used in particular, although not necessarily solely, in applications that require lightweight materials with good mechanical properties and good vibro-acoustic response or in applications that require materials with high sound reflection, absorption or sound isolation in a certain frequency band.

An In The Ear (ITE) microphone improves the acoustic response of a Behind The Ear (BTE) Implantable Cochlear Stimulation (ICS) system during telephone use. An acoustic seal provided by holding a telephone earpiece against the ear provides improved coupling of low frequency (up to about 1 KHz) sound waves, sufficient to overcome losses due to the near field acoustic characteristics common to telephones. In a preferred embodiment, the ITE microphone is connected to a removable ear hook of the BTE ICS system by a short bendable stalk.

A method for determining the polarity of a loudspeaker including measuring a loudspeaker-room acoustical response at a position with a microphone and filtering the loudspeaker-room acoustical response for increasing the signal to noise ratio of a first peak corresponding to direct sound in the loudspeaker-room acoustical response, wherein the sign of a sample in the first peak in the filtered loudspeaker-room acoustical response indicates the polarity of the loudspeaker.

An acoustic borehole logging system for parameters of a well borehole environs. Full wave acoustic response of a scanning transducer is used to measure parameters indicative of condition of a tubular lining the well borehole, the bonding of the tubular to material filling an annulus formed by the outside surface of the tubular and the wall of the borehole, the distribution of the material filling the annulus, and thickness of the tubular. A reference transducer is used to correct measured parameters for variations in acoustic impedance of fluid filling the borehole, and for systematic variations in the response of the scanning transducer. Corrections are made in real time. The downhole tool portion of the logging system is operated essentially centralized in the borehole using a centralizer that can be adjusted for operation in a wide range of borehole sizes.

A method and device for on-line foam quality acoustic monitoring are suggested. As per the invention, the method provides for the following: at least one emitter / receiver pair is placed in a close vicinity to the foam flow; at least one acoustic pulse is emitted; time, within which the acoustic pulse overcomes the way from the emitter to the receiver, is recorded; acoustic pulse speed (sound speed) is determined by analyzing an acoustic response of the receiver. After that, pressure in the foam in the area between the emitter and receiver is defined and the foam quality Γ is calculated as per the equation:Γ=12±14-NρflpCfm2,where: Cfm—speed of sound in the foam, p—pressure, ρfl—fluid density, Γ—foam quality, N—polytrophic expansion coefficient (N=1 for isothermal process; N=1.4 for adiabatic process), in case of a foam composed of a perfect gas and a perfect fluid for cases, when the foam quality is supposedly much lower than ½ or much bigger than ½, the sign to be selected in the said formula is <<−>> and <<+>>, respectively; in cases when both values of Γ are near ½, the both quality values should be considered as a possible option, or in more complicated cases, it can be found from the Value Spreadsheet

The invention proposes a method and system for applying a time-domain tracking filter technique in a conventional audio measurement unit for measuring the audio response parameter of a sound producer. The present invention adopts a special signal to excite the sound producer to be tested; after testing the voltages at both ends of the sound producer and the sound pressure signals, the invention can use the time-domain tracking filter to track the base frequency variation in the audio response; the invention can obtain various audio response parameter results curve such as base frequency response, each harmonic response, total harmonic distortion+noise response, total harmonic distortion response and the like by processing such as equivalent low pass filtering, band-pass filtering, band elimination filtering, high-pass filtering and the like. The invention has superiority which lies in that it can separate and obtain the base frequency and subfrequency response in the audio response ofthe sound producer to be tested in a short time based on the time-domain, which can greatly enhance the test efficiency to the audio response parameter of the sound producer in the R&D stage and the quality management stage.

Photoacoustic measurements utilize emitted light to generate an acoustic response in tissue, with the acoustic response being proportional to the presence of an absorber of the light in the tissue. The present disclosure relates the use of focused light to acquire photoacoustic measurements. In one embodiment, the light is modulated, such as spatially modulated, such that the light may be focused within an otherwise scattering medium, such as tissue.

A method is provided for measuring real time ambient pressure at a region of interest in a fluid-filled body cavity by introducing into the cavity a composition of gas-containing microbubbles having a predetermined fragility threshold correlating to the rupture response of their capsules to the ambient fluid pressure and / or applied acoustic pressure. An ultrasonic signal is applied at the region of interest at a power level sufficient to destroy the microbubble population having a fragility threshold below the applied power level. The ultrasound backscatter response is detected from the population of intact and disintegrating microbubbles remaining at the region of interest and this backscatter signal is correlated to predetermined acoustic response properties to determine the ambient pressure at the region of interest.