978results about "Hearing device active noise cancellation" patented technology

An active noise cancellation system includes a series of features for more effective cancellation, greater reliability, and improved stability. A particular feature adapted for headset systems includes locating a residual microphone radially offset from the center of a sound generator to detect a signal more similar to that incident upon the eardrum of the user. In addition, an open back headset design includes perforations on the side of the headset instead of the back, so that the perforations are less susceptible to inadvertent blockage. The system also includes a mechanism for detecting changes in the acoustic characteristics of the environment that may be caused, for example, by pressure exerted upon the earpieces, and that may destabilize the cancellation system. The system automatically responds to such changes, for example, by reducing the gain or the frequency response of the system to preserve stability. The system further includes other methods for detecting imminent instability and compensating, such as detecting the onset of signals within enhancement frequencies characteristic of the onset of instability, and adjusting the gain or frequency response of the system or suppressing the enhanced signals. The system further includes a mechanism for conserving battery life by turning the system off when sound levels are low, or adjusting the power supply to the system to correspond to the current power requirements of the system.

A noise canceling and communication system is described. An in-ear device is adapted to fit in the ear canal of a device user. A passive noise reduction element reduces external noise entering the ear canal. An external microphone senses an external acoustic signal outside the ear canal to produce a representative external microphone signal. An internal microphone senses an internal acoustic signal proximal to the tympanic membrane to produce a representative internal microphone signal. One or more internal sound generators produce a noise cancellation signal and an acoustic communication signal, both directed towards the tympanic membrane. A probe tube shapes an acoustic response between the internal sound generator and the internal microphone to be relatively constant over a wide audio frequency band. An electronics module is located externally of the ear canal and in communication with the in-ear device for processing the microphone signals using a hybrid feed forward and feedback active noise reduction algorithm to produce the noise cancellation signal. The noise reduction algorithm includes a modeling component based on a transfer function associated with the internal sound generator and at least one of the microphones to automatically adjust the noise cancellation signal for fit and geometry of the ear canal of the user. The communication component also includes a modeling component based on a transfer function associated with the internal sound generator and at least one of the microphones to automatically adjust the communication signal for fit and geometry of the ear canal of the user and to assure that the communication signal does not interfere with the noise reduction algorithm and that the noise cancellation signal does not interfere with passing of the communication signal.

A personal audio device, such as a wireless telephone, includes an adaptive noise canceling (ANC) circuit that adaptively generates an anti-noise signal from a reference microphone signal and injects the anti-noise signal into the speaker or other transducer output to cause cancellation of ambient audio sounds. An error microphone is also provided proximate the speaker to measure the ambient sounds and transducer output near the transducer, thus providing an indication of the effectiveness of the noise canceling. A processing circuit uses the reference and / or error microphone, optionally along with a microphone provided for capturing near-end speech, to determine whether the ANC circuit is incorrectly adapting or may incorrectly adapt to the instant acoustic environment and / or whether the anti-noise signal may be incorrect and / or disruptive and then take action in the processing circuit to prevent or remedy such conditions.

A listening instrument includes a) a microphone unit for picking up an input sound from the current acoustic environment of the user and converting it to an electric microphone signal; b) a microphone gain unit for applying a specific microphone gain to the microphone signal and providing a modified microphone signal; c) a direct electric input signal representing an audio signal; d) a direct gain unit for applying a specific direct gain to the direct electric input signal and providing a modified direct electric input signal; e) a detector unit for classifying the current acoustic environment and providing one or more classification parameters; f) a control unit for controlling the specific microphone gain applied to the electric microphone signal and / or the specific direct gain applied to the direct electric input signal based on the one or more classification parameters.

A UAV is provided to cancel background noise from audio data collected by the UAV. The UAV is provided with one or more background microphones in a proximity of one or more background noise-producing components. The UAV is also provided with one or more audio source collecting microphones. The audio data collected by the background microphones may be used to reduce or cancel interfering background noise from the audio signal detected by the audio source collecting microphone. The target audio may be captured or recorded with little or no background noise.

A system and method for interjecting ambient background sounds into a set of headphones is provided. The system monitors an ambient sound environment and compares the ambient sound environment to a preset set of sound characteristics (e.g., frequency signatures, amplitudes and durations) in order to detect important or critical background sounds (e.g., alarm, horn, directed vocal communications, crying baby, doorbell, telephone, etc.). When a critical background sound is detected, the system interjects either a notification signal or a portion of the ambient background into the audio stream, thus alerting a user of a potentially important sound or event occurring within their immediate vicinity.

A noise reducing device includes: an acoustic-to-electric conversion section for collecting noise and outputting an analog noise signal; an analog-to-digital conversion section for converting the analog noise signal into a digital noise signal; and a digital processing section for generating a digital noise reducing signal on a basis of the digital noise signal and a desired parameter. The device further includes: a retaining section for retaining a plurality of parameters corresponding to a plurality of kinds of noise characteristics; a setting section for setting one of the plurality of parameters as the desired parameter of the digital processing section; a digital-to-analog conversion section for converting the digital noise reducing signal into an analog noise reducing signal; and an electric-to-acoustic conversion section for outputting noise reducing sound on a basis of the analog noise reducing signal.

According to an aspect, a sound outputting device includes a front unit, a first side unit, a second side unit, a sound transmitting portion, and a piezoelectric speaker. The first side unit is coupled to one end portion of the front unit. The second side unit is coupled to another end portion of the front unit. The sound transmitting portion is provided in the first side unit for transmitting a sound via cartilage conduction. The piezoelectric speaker vibrates the sound transmitting portion.

A headset for voice communication is disclosed, the headset comprising at least one earphone having a speaker and one or more microphones. The headset is configured to be operated in a first mode in which an electronic noise cancelling circuit is configured to receive ambient audio via at least a first of the one or more microphones to implement an active noise cancelling function and to provide a noise cancelling audio signal to the speaker, and in a second mode in which ambient audio is provided as a hear-through audio signal to the speaker. The headset for voice communication is configured to detect whether a call is ongoing, and to provide a call signal in response to the detection. The headset comprises the electronic noise cancelling circuit, a voice activity detection unit configured to indicate when a user speaks, a switching element configured to switch the headset between operating in the first mode and operating in the second mode, wherein, when the headset is operated in the first mode and the call signal indicates that the user is not in a call, the switching element is configured to switch the headset from operating in the first mode to operating in the second mode when the voice activity detection unit indicates that the user speaks.

A device (100) for processing audio data, wherein the device (100) comprises an audio transducer (102, 104) adapted for being operable as a loudspeaker or as a microphone, wherein the audio transducer (102, 104) is adapted for detecting audio data indicative of body noise of a user (106) when being operated as a microphone, and a processing unit (108) adapted for processing the audio data indicative of the body noise of the user (106) for at least partially compensating a wear asymmetry of the audio transducer (102, 104) worn by the user (106) when operating the audio transducer (102, 104) as a loudspeaker for reproducing audio content.

An earpiece for providing an audio signal to two ears of a user, includes an audio interface for providing the audio signal, a bone conduction speaker coupled to the audio interface for outputting an output signal, an adaptive filter with an adjustable impulse response to provide a filtered signal that once played to the second ear of a user, by an in-ear speaker, reduces an audio effect of the leakage signal on the second ear of the user, an in-ear speaker coupled to the audio interface for providing an in-ear audio signal to the second ear of the user, in response to the filtered signal and the second input signal, an in-ear microphone for sensing a sensed audio signal, and a processor for updating an impulse response of the adaptive filter in order to reduce a contribution of the leakage signal to the sensed audio signal.

A vehicle overhead audio system, an electromagnetic transducer assembly for use therein and a computer system programmed with a graphic software control for changing the audio system's signal level and delay are provided where a headliner of the vehicle is a loudspeaker of the system thereby replacing many other loudspeakers and being invisible to the occupants. The headliner is driven in multiple zones that effect proper imaging for all occupants. Supplemental high frequency and subwoofer speakers and signal processing circuitry are included in one aspect of the invention.

Techniques for estimating adaptive noise canceling (ANC) performance in a personal audio device, such as a wireless telephone, provide robustness of operation by triggering corrective action when ANC performance is low, and / or by saving a state of the ANC system when ANC performance is high. An anti-noise signal is generated from a reference microphone signal and is provided to an output transducer along with program audio. A measure of ANC gain is determined by computing a ratio of a first indication of magnitude of an error microphone signal that provides a measure of the ambient sounds and program audio heard by the listener including the effects of the anti-noise, to a second indication of magnitude of the error microphone signal without the effects of the anti-noise. The ratio can be determined for different frequency bands in order to determine whether particular adaptive filters are trained properly.

A noise reduction apparatus includes: a speaker with a speaker unit held by holding means to make it possible to mix sounds emitted from front and rear of a vibration plate of the speaker; a microphone provided in an area where the sounds emitted from the front and rear of the vibration plate of the speaker are mixed and cancelled; and means for supplying a noise reduction audio signal obtained by phase-inverting an audio signal collected by the microphone to the speaker.

A reproducing device includes a reproducing unit configured to reproduce a contents sound, an output unit configured to output the contents sound which has been reproduced using the reproducing unit to a headphone, a talk detection unit configured to detect that a headphone fitter who fits the headphone talks with a person and an image normal position control unit configured to move the normal position of the image of the contents sound which has been reproduced using the reproducing unit to an arbitrary position when the talk detecting unit has detected that the headphone fitter has started talking with the person.

A portable assistive listening system for enhancing sound for hearing impaired individuals includes a hearing aid and a separate handheld digital signal processing device. The hearing aid includes a microphone, a digital signal processor, a speaker, a power source, an ultra-wide band (UWB) transceiver, and a control system configured and arranged to monitor a status of the power source and a status of the UWB transceiver, to receive an input signal from the microphone, to selectively route the input signal for processing responsive to the status of the power source and of the UWB transceiver, and to deliver an output signal to the speaker. The handheld digital signal processing apparatus includes a UWB transceiver, and a digital audio signal processor configured and arranged to receive the input signal from the earpiece control system, to process the input signal to enhance the input signal and to output the enhanced signal to the hearing aid control system. The hearing aid and the signal processing apparatus communicate through the UWB transceivers.

A method of active noise reduction is described which comprises receiving an audio signal (132) to be played, receiving a noise signal (105, 107, 116, 118, 126), indicative of ambient noise (111), from at least one microphone (104, 106), and generating a noise cancellation signal (114) depending on both, said audio signal (132) and said noise signal (105, 107, 116, 118, 126).

Various methods and apparatus for processing audio signals are disclosed herein. The assembly may be attached, adhered, or otherwise embedded into or upon a removable oral appliance to form a hearing aid assembly. Such an oral appliance may be a custom-made device which can enhance and / or optimize received audio signals for vibrational conduction to the user. Received audio signals may be processed to cancel acoustic echo such that undesired sounds received by one or more intra-buccal and / or extra-buccal microphones are eliminated or mitigated. Additionally, a multiband actuation system may be used where two or more transducers each deliver sounds within certain frequencies. Also, the assembly may also utilize the sensation of directionality via the conducted vibrations to emulate directional perception of audio signals received by the user. Another feature may include the ability to vibrationally conduct ancillary audio signals to the user along with primary audio signals.

An earpiece for real-time audio processing of ambient sound includes an ear bud that provides passive noise attenuation to the earpiece such that exterior ambient sound is substantially reduced within an ear of a wearer, an exterior microphone that receives ambient sound and converts the received ambient sound into analog electrical signals, and an analog-to-digital converter that converts the analog electrical signals into digital signals representative of the ambient sounds. The earpiece further includes a digital signal processor that performs a transformation operation on the digital signals according to instructions received from a mobile device, the transformation operation transforms the digital signals into modified digital signals, a digital-to-analog converter that converts the modified digital signals into modified analog electrical signals, and a speaker that outputs the modified analog electrical signals as audio waves.

A Personal Noise Reduction for enclosed cabins is disclosed. According to one embodiment, an input audio source corresponding to sound received from multiple microphones situated equidistantly in both directions in a two dimensional plane, is converted to a digital signal via an analog to digital (A / D) convertor. The AID converted audio is analyzed for content to identify ambient noise. The frequency, amplitude and phase of the identified ambient noise is subsequently determined. A Noise correction sound wave is generated with negative phase of that corresponding to the identified ambient noise. The noise correction sound wave is added to the identified noise to create a noise corrected sound.

A system for processing sound, the system including: (a) a processor, configured to process a first input signal that is detected by a first microphone at a detection moment, a second input signal that is detected by a second microphone at the detection moment, and a third input signal that is detected by a bone-conduction microphone at the detection moment, to generate a corrected signal that is responsive to the first, second, and third input signals; and (b) a communication interface, configured to provide the corrected signal to an external system.

A noise reduction audio reproducing method includes the steps of: generating, from an audio signal of collected and obtained noise, an audio signal for noise cancellation to cancel the noise by synthesizing the audio signal for noise cancellation and the noise in an acoustic manner, reproducing the audio signal for noise cancellation acoustically to synthesize this with the noise in an acoustic manner; emphasizing an audio component to be listened to, of collected audio; synthesizing an audio signal with the audio component to be listened to being emphasized, and the audio signal for noise cancellation to supply the synthesized signal thereof to an electro-acoustic converting unit; and controlling so as to supply an audio signal, with the audio component to be listened to having been emphasized, to a synthesizing unit, regarding only a section based on a control signal.

An earphone arrangement comprises a microphone (109) which generates a microphone signal and a sound transducer (101) which radiates a first sound component to a user's ear (103) in response to a drive signal. An acoustic channel (111) is further provided for channeling external sound so as to provide a second sound component to the user's ear (103). An acoustic valve (117) allows the attenuation of the acoustic channel (111) to be controlled in response to a valve control signal. A control circuit (105) generates the valve control signal in response to the microphone signal to provide a variable attenuation resulting in a mixed sound of the first sound component and the second sound component reaching the user's ear (103). The combined use of acoustic and e.g. electric signal paths allows improved performance and in particular allows a dynamic trade-off between open and closed earphone design characteristics with respect to external sounds.

Various methods and apparatus for processing audio signals are disclosed herein. The assembly may be attached, adhered, or otherwise embedded into or upon a removable oral appliance to form a hearing aid assembly. Such an oral appliance may be a custom-made device which can enhance and / or optimize received audio signals for vibrational conduction to the user. Received audio signals may be processed to cancel acoustic echo such that undesired sounds received by one or more intra-buccal and / or extra-buccal microphones are eliminated or mitigated. Additionally, a multiband actuation system may be used where two or more transducers each deliver sounds within certain frequencies. Also, the assembly may also utilize the sensation of directionality via the conducted vibrations to emulate directional perception of audio signals received by the user. Another feature may include the ability to vibrationally conduct ancillary audio signals to the user along with primary audio signals.

There is provided a filter circuit for producing a noise reduction signal for reducing a noise signal collected by a microphone, including: a digital section including an analog / digital conversion section configured to convert the noise signal into a digital noise signal, a digital filter section configured to produce a digital noise reduction signal based on the digital noise signal, and a digital / analog conversion section configured to convert the digital noise reduction signal into an analog noise reduction signal; an analog path connected in parallel to said digital section and configured to output the noise signal as it is or after processed by an analog filter; and a synthesis section configured to synthesize the analog noise reduction signal outputted from said digital / analog conversion section of said digital section and the analog signal outputted from said analog path to produce a noise reduction signal to be used for noise reduction.

Various methods and apparatus for processing audio signals are disclosed herein. The assembly may be attached, adhered, or otherwise embedded into or upon a removable oral appliance to form a hearing aid assembly. Such an oral appliance may be a custom-made device which can enhance and / or optimize received audio signals for vibrational conduction to the user. Received audio signals may be processed to cancel acoustic echo such that undesired sounds received by one or more intra-buccal and / or extra-buccal microphones are eliminated or mitigated. Additionally, a multiband actuation system may be used where two or more transducers each deliver sounds within certain frequencies. Also, the assembly may also utilize the sensation of directionality via the conducted vibrations to emulate directional perception of audio signals received by the user. Another feature may include the ability to vibrationally conduct ancillary audio signals to the user along with primary audio signals.

An hearing prosthesis configured to cancel received bone-conducted sound. The hearing prosthesis comprises: first and second matched microphones configured to be implanted in a recipient in a spaced arrangement such that the first microphone receives air-conducted sound signals and bone-conducted sound signals substantially simultaneously, and wherein the second microphone receives bone-conducted sound signals at substantially the same time as the first microphone and receives the air-conducted sound signals after a time delay. The time delay results in a relative phase difference between the air-conducted sound signals and the bone-conducted sound signals received by the second microphone. The prosthesis also comprises a noise cancellation system configured to cancel, based on the phase difference, the bone-conducted sound signals received by the first and second microphones.