69results about "Signal transmission/receiving via power distribution" patented technology

An apparatus is provided for high frequency multiplexed electrical line communication for cable TV, telephone, internet, security and other control applications over the mid and low voltage power lines and directly through the transformers. The apparatus includes a transmitter, a receiver, a modem, a multiplexer and multiple couplers at each of two or more locations along an electrical line. The couplers have capacitive circuits serially connected with an air-core or dielectric-core transformer. The capacitive circuits resonate with the transformer at a preselected frequency. The coupler eliminates noise and is matched to the characteristic impedance of the line at the preselected frequency, which linearizes communication on the line and allows high speed data and voice communication over long distances. Multiple modulators and demodulators are used to produce multiple modulated carrier frequencies.

Low-cost intelligent control and communication devices are arranged to communicate with one another over one or more shared physical media, such as a powerline or a radio frequency band. No network controller is needed, because any device can act as a master, slave, or repeater. Adding more devices makes the system more robust, by virtue of a simple protocol for communication retransmissions and retries.

Data signals are communicated between a power line and a computer, wherein the power line provides power to the computer via a distribution transformer and the computer is in communication with a wireless communication path. A first data signal is communicated with the power line. A conversion is made between the first data signal and a second data signal capable of being communicated wirelessly. The second data signal is wirelessly communicated with the wireless communication path.

A system is described for transmitting video signals over various communication media using digital signal processing techniques. An embodiment of the system uses an orthogonal frequency division multiplexing (OFDM) modulation process that enables high-speed data communications of Ethernet and / or MPEG or JPEG or H264 compressed or uncompressed digital video. A second embodiment frequency modulates the OFDM modulated signal (FM-OFDM). The first and second embodiments are implemented with a transmit Ethernet interface, an MPEG or JPEG or H264 compressed or uncompressed digital video capture device, and a modem including a modulator and demodulator that provides communication with several other modem devices along communication media such as power lines, wireless (air), cable, or twisted pairs.

A power supply that includes networking capabilities where networking data is sent and received to and from other systems over the power line and to and from the rest of the system that is being powered over the power supplies output power. The power supply can be included within a system or be external to the system, but in either case, the data from the network is transferred to and from the rest of the system over the same cables that are used to transfer output power from the power supply to the system.

During the communication with a house through an electric power line, a control device determines whether an engine is operating or not. If it is determined that the engine is operating, the control device stops the engine and a motor generator to stop the electric power generation by the motor generator using the output of the engine.

A powerline network system. The system includes a power transformer device at a public utility facility. The system has a powerline box coupled to the transformer device. In a preferred embodiment, the powerline box comprises at least three lines including a first phase, a second phase, and a third phase. The first phase, the second phase, and the third phase are derived from the power transformer device. The system has a powerline coupler coupled to the first phase, the second phase, and the third phase and a multichannel data communication device coupled to the powerline coupler. In a preferred embodiment, the multichannel data communication device includes N channels, whereupon N is an integer greater than 8. The system has a first capacitor and a second capacitor coupled to the first phase and a first length of wiring between the first capacitor and the second capacitor. Preferably, the first length of wire is inductively coupled to one or more power line communication devices. The system has a third capacitor and a fourth capacitor coupled to the second phase and a second length of wiring between the third capacitor and the fourth capacitor. Preferably, the second length of wiring is inductively coupled to one or more power line communication devices. The system has a fifth capacitor and a sixth capacitor coupled to the third phase and a third length of wiring between the fifth capacitor and the sixth capacitor. Preferably, the third length of wiring is inductively coupled to one or more powerline communication devices.

An information signal to be communicated to a roof-mounted light bar or other electrical or electronic device travels over the vehicle's or other environment's power bus or other power conductor. In one exemplary illustrative non-limiting implementation, a modulated current load draws power supply current in an amount that is instantaneously responsive to at least some characteristic of the information signal to be communicated. This modulated current loading induces the vehicular or other power supply (e.g., DC battery) to modulate its output voltage in a manner that is responsive to the modulated current loading. A voltage sensor and demodulator also connected to the power bus senses the resulting voltage fluctuations and demodulates those fluctuations to recover or regenerate the original information signal. The recovered information signal may be used for any purpose including but not limited to controlling aspects of the operation of an emergency vehicle light bar or other audible and / or visual warning system or other device. The data sender and data receiver can be co-located to provide a full duplex or half duplex powerline communicated transceiver.

A communication system includes communication protocols that allow a single network or multiple neighboring networks to increase resource sharing and reduce mutual interference and increase their overall throughput. Various protocols apply to homogenous networks in which all power line communication (PLC) devices of multiple networks are interoperable with respect to full power line communication in a common PHY (specifications, signaling capabilities, modulation scheme, coding scheme, bandwidth, etc.) and to heterogeneous networks in which devices of some PLC networks are not interoperable with PLC devices of other PLC networks with respect to full power line communication given that the devices of the different networks do not employ a common PHY. With respect to heterogeneous networks, a protocol is provided to enable coexistence via a signaling scheme common to all of the devices of the network that allows resource sharing between the devices of the multiple heterogeneous networks. Homogeneous networks are those in which all nodes can communicate with each other using a common PHY, so that information about one PLC network can be transferred to another PLC network. Heterogeneous networks are those in which not all PLC networks can exchange information using their own native PHY, such as where users in different apartments or houses use different devices having different specifications, different signaling capabilities, modulation scheme, coding scheme, bandwidth and the like.

A method and system for bidirectional data and power transmission are shown and described. An exemplary embodiment comprises a current receiver, including a microprocessor and a driver, and a plurality of nodes connected to the current receiver through a plurality of wires that allow both power supply and bidirectional data transfer between the current receiver and the plurality of nodes. The use of the plurality of wires for both power and data transmission offers significant advantages over the prior art in terms of weight reduction and system modularity.

Methods and systems for injecting information into a power signal, and techniques to capture the injected information are disclosed. Various processes for using the information are also presented, which may relate to the type of device receiving the information. Moreover, techniques for determining the distance of a consumer device are disclosed, as have a specific implementation which relates to mobile consumer devices. Also various ways of encrypting both in-band and out-of-band transmission are disclosed.

A sensor device integrates ZigBee® technology into power switch device to provide monitoring and control of power usage, as well as operational control of connected devices. The sensor device uses a power line communication (PLC) network to transfer collected data and to provide remote control capability to connected appliances. The sensor device, in conjunction with a master switch device, a communication enabled switching device, and the power switch device, provides an integrated home environment for communication, streaming media, monitoring, and remote control of power usage, as well as remote operational monitoring and control of connected appliances in the home.

A method and apparatus to efficiently transmit data. The method and apparatus effectively aggregate data and transmit the data in a high-speed power line communication (PLC) network. The method of transmitting the data includes combining each of at least one or more data units transferred from an upper layer, with a field to indicate attribute information of the data unit, dividing the combined data units and fields into frame blocks of an identical size, and aggregating the divided frame blocks and transferring the aggregated frame blocks as one frame to a PHY layer. In this way, data units of a variety of types and sizes transferred from the upper layer are aggregated and transmitted as the one frame.

A power line communication system includes: a first electronic instrument and a second electronic instrument, wherein information is received or transmitted between the first electronic instrument and the second electronic instrument which are connected through a communication line using a power line, wherein the first electronic instrument comprises: a key operation unit for accepting a key operation performed by a user; and a transmission unit for transmitting a power-on request signal for requesting the second electronic instrument to be turned on, to the second electronic instrument through the power line based on the key operation in the key operation unit, and the second electronic instrument comprises: a reception unit for receiving the power-on request signal transmitted from the first electronic instrument through the power line; and a power-on control unit for turning on the second electronic instrument based on the power-on request signal received by the reception unit.

A system for bidirectional data and power transmission is shown and described. In an embodiment, a network power controller provides power to a node and communicates bidirectionally with the node. In an embodiment, the network power controller is coupled to an AC power source and provides both AC and DC power to the node. In an embodiment, the network power controller and node are coupled via a conduit comprising three wires, wherein the first wire carries DC power and communications, the second wire carries AC power, and the third wire is the neutral / ground line. In another embodiment, the network power controller and node are coupled via a conduit comprising two wires, wherein the first wire carries AC power and communications and the second wire is the neutral / ground line. In an embodiment, AC power having one phase or more can be controlled at the network power controller and the node.