79 results about "Reprocessor" patented technology

Because reprocessing or refurbishing of physiological sensors reuses large portions of an existing sensor, the material costs for refurbishing sensors is significantly lower than the material costs for making an entirely new sensor. Typically, existing reprocessors replace only the adhesive portion of an adhesive physiological sensor and reuse the sensing components. However, re-using the sensing components can reduce the reliability of the refurbished sensor and / or reduce the number of sensors eligible for refurbishing due to out-of-specification sensor components. It is therefore desirable to provide a process for refurbishing physiological sensors that replaces the sensing components of the sensor. While sensing components are replaced, generally, sensor cable and / or patient monitor attachments are retained, resulting in cost savings over producing new sensors.

A method measures a property of a germicidal solution in an endoscope processor spectroscopically by placing a quantity of the solution into a cuvette and passing a light therethrough. A reservoir receives a quantity of the solution and bubbles are filtered out via a cross-flow filter prior to putting a sample therefrom into the cuvette for measuring.

An on board monitor for an endoscope reprocessor for monitoring the performance and order of a predetermined set of critical steps for reprocessing an endoscope. The monitor will only allow the overall system to reach the last step indicating successful completion of the process related to the critical steps representing successful reprocessing of an endoscope after the system successfully completes all of the previous critical steps and in the correct order.

Apparatus and method for detecting connectivity in a channel in an endoscope undergoing reprocessing using an automatic reprocessor, the apparatus including a source of pressurized fluid which may be a gas alone or gas and liquid and a back pressure detector connected to the channel or channels of interest in the endoscope, the method including providing a source of pressurized fluid, directing the pressurized fluid to a channel in an endoscope, monitoring the time for the back pressure in the pressurized fluid to decay to a predetermined level; and determining whether the channel is connected and open or disconnected by comparing the decay time of the actual back pressure to one or more predetermined values corresponding to the specific channel or channels and model of endoscope undergoing reprocessing.

A reprocessor for microbially deactivating items. The reprocessor has a circulation system for circulating a microbial deactivation fluid through a deactivation chamber that forms part of the circulation system. A container is provided for insertion into the deactivation chamber for holding items to be microbially deactivated. The container includes a tray and a lid. The tray and lid have interlocking, integrally formed, rigid seal elements formed thereon to form a seal between the tray and the lid.

A reprocessor for microbially deactivating items. The reprocessor has a circulation system for circulating a microbial deactivation fluid through a deactivation chamber that forms part of the circulation system. A container is provided for insertion into the deactivation chamber for holding items to be microbially deactivated. The container includes a tray and a lid. The tray and lid have interlocking, integrally formed, rigid seal elements formed thereon to form a seal between the tray and the lid.

An automated endoscope reprocessor (10) includes a removable rack (12) for receiving a container (16, 16′). The container has a clamshell housing (20) having two mating portions (24, 26). The portions together define an internal pressurizable chamber (56) for receiving an endoscope head (22). The endoscope's connector cord (82) is carried through an outlet (80) to the chamber. The outlet is defined by channels (88, 90), one in each of the two housing portions (24, 26). A gasket assembly in the outlet provides a restricted fluid passage which allows a small portion of fluid to flow through the outlet when the connector cord is positioned therein. The gasket assembly (120) includes a number of resiliently flexible fins (126, 128, 130) positioned in each channel, each fin having a U-shaped slot (144, 146, 148). Pairs of fins overlap such that the slots together define openings (150) of diminishing size. Depending on the diameter of the cord, the cord is contacted by one or more of the fins adjacent the respective slot. A reprocessing liquid, such as peracetic acid in solution, is pumped into the chamber (56). The liquid leaks slowly through the slots, allowing an above ambient pressure to be maintained in the chamber, while ensuring that all exterior surfaces of the endoscope are contacted with the reprocessing liquid.

An occlusion minimizing connector connects a lumen in a lumen device to a source of sterilization fluid in an endoscope reprocessor. The connector has a sealing portion shaped to engage a surface on the lumen device. The sealing portion is formed of a resilient material biasing a sealing surface into contact with the surface on the lumen device. The biasing is such that the seal is maintained when pressure within the flow passage is below a predetermined level preventing leakage of the flow past the sealing portion. When pressure within the flow passage is above the predetermined level fluid leaks past the sealing portion to bathe the surface on the lumen device. Thus, the surface will not be occluded during a cleaning process.

A monitoring system for monitoring a fluid circulation system in a reprocessor apparatus for microbially deactivating devices, wherein the fluid circulation system includes at least one connection. The monitoring system includes pressure sensing means for sensing the pressure of fluid flowing through the fluid circulation system. The pressure sensing means generates an electrical signal indicative of the sensed pressure. A controller, responsive to the electrical signal, is provided for determining whether the sensed pressure is indicative of an improper connection.

A system for sterilizing or microbially deactivating instruments and devices. The system includes a circulation system for circulating a microbial deactivation fluid through a chamber for containing the instruments and devices. The chamber forms a portion of the circulation system. The system further includes a fluid over-flow / make-up air assembly. The fluid over-flow / make-up air assembly includes a manifold having an inner cavity that is in fluid communication with the circulation system, an overflow port in the manifold, and an overflow valve assembly disposed in the manifold allowing fluid flow from the cavity to the overflow port when a pressure in the cavity exceeds a pressure in the overflow port by a predetermined amount. A filter assembly is attached to the manifold. The filter assembly has a filter valve assembly in communication with the cavity. The filter assembly is operable to allow air through the filter assembly into the cavity when the pressure within the cavity is a predetermined amount less than the pressure within the filter assembly.

A method of microbially deactivating items and storing the same, comprising the steps of: a) placing items within a cavity in a sealable container having fluid access ports therein, the fluid access ports having a normally closed position and being moveable to an open position; b) placing the container having items to be microbially deactivated in the cavity into a reprocessor having a circulation system for circulating a microbial deactivation fluid during a deactivation cycle, wherein the fluid access ports in the container are moved to the open position by actuating means on the reprocessor to be in fluid communication with the circulation systems; c) circulating the microbial deactivation fluid through the cavity of the container; and d) removing the container from the reprocessor following a deactivation cycle, wherein removal of the container from the reprocessor causes the fluid access ports to assume the normally closed position.

A method detects proper connection of fixtures to a channel in an endoscope and proper flow through the channel during a cleaning or disinfection procedure. The endoscope has a first opening into one of its channels to which is connected a fixture and a second opening which is placed into a liquid. Negative pressure at the first opening draws an amount of liquid through the channel which is measured. If the channel is blocked insufficient liquid will flow an be measured. If the fixture is not connected properly air will leak in and insufficient liquid will flow an be measured.

An endoscope head container (16, 16') has a clamshell housing (20) having two mating portions (24, 26) which together define an internal pressurizable chamber (56) for receiving the endoscope head (22). The endoscopeIs connector cord (82) is received through an outlet (80) defined by channels (88, 90), one formed in each of the two housing portions. A gasket assembly in the outlet provides a restricted fluid passage which allows a small portion of fluid to flow through the outlet when the connector cord is positioned therein. The gasket assembly (120) includes a number of resiliently flexible fins (126, 128, 130). Pairs of fins overlap such that slots (144, 146, 148) together define openings (150) of diminishing size. The cord is contacted by one or more of the fins adjacent the respective slot. A reprocessing liquid is pumped into the chamber (56) and leaks slowly through the slots, allowing an above ambient pressure to be maintained in the chamber, while ensuring that all exterior surfaces of the endoscope are contacted with the reprocessing liquid.

The present invention relates to a endoscope washer, including a basin for receiving an endoscope to be washed; a rack which secures thereto a portion of the endoscope and moves vertically within the basin; a drive unit for vertically moving the rack; a positioning member for adjusting a rack stopping position when the endoscope is to be set on the rack; and a drive control unit for controlling the drive unit based on computed results from the positioning member. For the endoscope washer, user may set the endoscope effectively and simply. In addition, the endoscope washer can blow air into the basin after completing the process of cleaning, disinfecting and flushing, to restrain the dilution / deterioration and reduce of used-repeatedly disinfecting liquid suitably.

A method measures a property of a germicidal solution in an endoscope processor spectroscopically by placing a quantity of the solution into a cuvette and passing a light therethrough. A reservoir receives a quantity of the solution and bubbles are filtered out via a cross-flow filter prior to putting a sample therefrom into the cuvette for measuring.

An endoscope reprocessor having a water supply disinfection filter and a method for self-disinfection of the filter employ a pair of connectors to switch from a normal operating mode into a self-disinfection mode in which circulating germicidal fluid within the reprocessor flows through the filter, while the water supply remains connected to the system and isolated from the circulating fluid.

An endoscope reprocessor having a water supply disinfection filter and a method for self-disinfection of the filter employ a pair of connectors to switch from a normal operating mode into a self-disinfection mode in which circulating germicidal fluid within the reprocessor flows through the filter, while the water supply remains connected to the system and isolated from the circulating fluid.

Apparatus and method for detecting connectivity in a channel in an endoscope undergoing reprocessing using an automatic reprocessor, the apparatus including a source of pressurized fluid which may be a gas alone or gas and liquid and a back pressure detector connected to the channel or channels of interest in the endoscope, the method including providing a source of pressurized fluid, directing the pressurized fluid to a channel in an endoscope, monitoring the time for the back pressure in the pressurized fluid to decay to a predetermined level; and determining whether the channel is connected and open or disconnected by comparing the decay time of the actual back pressure to one or more predetermined values corresponding to the specific channel or channels and model of endoscope undergoing reprocessing.

The present invention provides a method of operating a reprocessor that has a chamber for receiving items to be sterilized. The reprocessor is filled with water that has passed through a first and a second filter element that both comprise a filtration system. A liquid sterilant is generated by mixing the water with dry chemical reagents. The liquid sterilant is circulated through a fluid circulation system and the filtration system wherein a portion of the liquid sterilant is directed through a bypass conduit and another portion is directed through the first and second filter elements. After a predetermined exposure time, the reprocessor is drained. Then the reprocessor is filled with water for rinsing that has passed through the first and the second filter elements. The water for rinsing is heated prior to being introduced into the reprocessor.

The present invention provides a method of operating a reprocessor that has a chamber for receiving items to be sterilized. The reprocessor is filled with water that has passed through a first and a second filter element that both comprise a filtration system. A liquid sterilant is generated by mixing the water with dry chemical reagents. The liquid sterilant is circulated through a fluid circulation system and the filtration system wherein a portion of the liquid sterilant is directed through a bypass conduit and another portion is directed through the first and second filter elements. After a predetermined exposure time, the reprocessor is drained. Then the reprocessor is filled with water for rinsing that has passed through the first and the second filter elements. The water for rinsing is heated prior to being introduced into the reprocessor.

A reprocessor having a circulation system for circulating a microbial deactivation fluid through a chamber that forms a part of the circulation system. The reprocessor includes a water filtration system for filtering water used in the reprocessor. The water filtration system includes a fluid feed line connectable to a source of pressurized water. A first filter and second filter elements are disposed in the fluid feed line for filtering fluids flowing therethrough. The second filter element is downstream from the first filter element and has the capacity to filter particles smaller than the first filter element. The fluid feed line forms a fluid path for water entering the reprocessor, and defines a portion of a path for microbial deactivation fluid circulated through the circulation system.

A system for sterilizing or microbially deactivating instruments and devices. The system includes a circulation system for circulating a microbial deactivation fluid through a chamber for containing the instruments and devices. The chamber forms a portion of the circulation system. The system further includes a fluid over-flow / make-up air assembly. The fluid over-flow / make-up air assembly includes a manifold having an inner cavity that is in fluid communication with the circulation system, an overflow port in the manifold, and an overflow valve assembly disposed in the manifold allowing fluid flow from the cavity to the overflow port when a pressure in the cavity exceeds a pressure in the overflow port by a predetermined amount. A filter assembly is attached to the manifold. The filter assembly has a filter valve assembly in communication with the cavity. The filter assembly is operable to allow air through the filter assembly into the cavity when the pressure within the cavity is a predetermined amount less than the pressure within the filter assembly.

A cartridge holder (30) for an automated endoscope reprocessor (10) is mounted on a movable rack (14). As the rack is wheeled into the chamber, a connector (164) on the cartridge holder (164) automatically makes a fluid connection with a connection port (158) within the chamber. The cartridge holder includes a base (42) and a lid (44), which is pivotally connected to the base by a hinge (110). A cartridge (40) holding a dose of a disinfectant concentrate or reagents is positioned in a well (50) defined by the base and the lid closed. Water flows through the cartridge holder via a fluid passageway (A) defined in part by the lid and in part by the hinge. The water mixes with the concentrate or reagents and the resulting disinfectant solution passes out of a lower end (205) of the cartridge into the well. The solution flows upwardly, around the cartridge, through an annular space (232) between the cartridge and the well, disinfecting the well in the process. The solution exits the cartridge through a plurality of bores (80) at an upper end of the base.

The invention discloses a water-free reverse osmosis water purifying machine, which comprises a preprocessor and a reprocessor. The preprocessor and the reprocessor are serially arranged in the water intake pipe. Water flows into the reprocessor after being treated with the preprocessor. The reprocessor, which is a closed vessel, is seperated into a condensed-water region and a pure-water region by the reverse osmosis film. Pure water flows out through the outlet of the pure-water region. Condensed water is produced during the operation of the reprocessor and collected in a accumulator. The outlet of the accumulator is connected with a pipe through drain lines and the pipe is connected directly with the inlet of the water purifying machine. The outlet of the accumulator is also connected with the inlet of the reprocessor through reflux lines. Since the water purifying machine collects the discharged condensed water and adopts the recycling equipment, washing procedure of the reverse osmosis film is no longer needed. The above water purifying machine helps to save water and extend the service life of the filter core of the preprocessor.

A method detects proper connection of fixtures to a channel in an endoscope and proper flow through the channel during a cleaning or disinfection procedure. The endoscope has a first opening into one of its channels to which is connected a fixture and a second opening which is placed into a liquid. Negative pressure at the first opening draws an amount of liquid through the channel which is measured. If the channel is blocked insufficient liquid will flow an be measured. If the fixture is not connected properly air will leak in and insufficient liquid will flow can be measured.

A fixture for holding a valve assembly in an automated washing system, wherein the valve assembly is movable between an opened position and a normally closed position. The fixture is comprised of first and second housing sections that are releaseably attachable to each other. The housing sections define an internal cavity that is dimensioned to hold the valve assembly in an opened position. A fluid inlet is in communication with the chamber, and is attachable to a source of an anti-microbial fluid in the washing system. A fluid outlet communicates with the chamber to allow the anti-microbial fluid to exit the fixture.

A reprocessor for microbially deactivating items. The reprocessor has a circulation system for circulating a microbial deactivation fluid through a deactivation chamber that forms part of the circulation system. A container is provided for insertion into the deactivation chamber for holding items to be microbially deactivated. The container includes a tray and a lid. The tray and lid have interlocking, integrally formed, rigid seal elements formed thereon to form a seal between the tray and the lid.