997 results about "HDMI" patented technology

The present invention makes it possible to perform transmission of stereo image data between devices in a favorable manner. A source device (disc player 210) receives E-EDID from a sink device (television receiver 250) via DDC of an HDMI cable 350. This E-EDID contains information on 3D image data transmission modes that can be supported by the sink device. On the basis of the information on 3D image data transmission modes from the sink device, the source device selects a predetermined transmission mode from among the 3D image data transmission modes that can be supported by the sink device. The sink device transmits 3D image data in the selected transmission mode to the sink device. For the convenience of processing in the sink device, the source device transmits information on the transmission mode for the 3D image data transmitted, to the sink device by using an AVI InfoFrame packet or the like. The sink device processes the 3D image data received from the source device in accordance with its transmission mode, thereby obtaining left eye and right eye image data.

A high-data rate connector for use with consumer electronics couples digital electrical connection interfaces with optical cabling and optical transceivers. In one implementation, an electrical connection interface, such as a DVI, HDMI, or USB connection interface is electrically coupled to an optical transceiver. The optical transceiver includes an optical transmitter, such as a VCSEL, and an optical detector, such as a photodiode. The transmit fiber and the receive fiber are each positioned relatively close to the corresponding optical transmitter and optical detector without a lens. The optical transmitter and the optical detector are each optimized for the size of the optical fiber core to enable high throughput speed at relatively low cost.

An object of the invention is to permit quick control of the operating state of a source equipment side from sink equipment. A television receiver (sink equipment) 100 and an amplifier (repeater equipment) 200 are interconnected over an HDMI cable 610, and the amplifier 200 and a DVD recorder (source equipment) 300 are interconnected over an HDMI cable 620. Each of the pieces of equipment includes, in addition to an HDMI receiving unit and an HDMI transmitting unit, a high-speed data line I / F included in a bidirectional communication unit that uses predetermined lines of the HDMI cable. The bidirectional communication unit is used to transmit channel selection information, a remote control code instructing recording, “theater mode” designating information, a remote control code, or the like from the television receiver 100 to the audio amplifier 200 or DVD recorder 300. The operating state of the audio amplifier 200 or DVD recorder 300 can be quickly controlled from the television receiver 100.

An image display system includes a transmitter device that can transmit video data and audio data, and a receiver device that is connected via an HDMI cable to the transmitter device and that includes a display device that displays video based on video data from the transmitter device and an audio output device that outputs audio based on audio data from the transmitter device. The receiver device includes an HDMI receiver that, when the receiver device is connected via the HDMI cable to the transmitter device and then receives therefrom an EDID request, transmits EDID, and that thereafter, when the receiver device receives video data and audio data from the transmitter device, checks whether or not the receiver device has received EDID-complying data so that, if EDID-complying data is found to have been received, the HDMI receiver decodes and outputs the video data and the audio data to the display device and the audio output device respectively and, if non-EDID-complying data is found to have been received, the HDMI receiver, by once cutting off the connection via the HDMI cable or turning off the receiver device, makes the transmitter device perform again the operation for acquiring EDID to thereby acquire correct EDID.

Methods, systems, and apparatuses are described for automatic identification and mapping of consumer electronic devices to ports on an HDMI switch. A device that is connected to an HDMI switch is identified based on data received over an HDMI connection, and ports on the HDMI switch are automatically mapped and configured. Methods, systems, and apparatuses are described for back-end database creation for automatic identification and mapping of consumer electronic devices to ports on an HDMI switch. The back-end database may be created by the based on video and audio signatures received from a consumer electronic device and based on remote control information and signatures.

There is provided an image processing apparatus capable of preventing colors from changing while being displayed when images are combined. The image processing apparatus according to an embodiment includes a video graphic processor 12 that combines a plurality of image signals to generate a combined image signal and an HDMI Tx 14 that transmits, when the combined image signal is transmitted, an identification flag of one of a first color space standard and a second color space standard having a color gamut wider than a color gamut of the first color space standard as the color space standard of the combined image signal and a host CPU 13 decides the first or second color space standard so as to prevent change in color while being displayed.

An apparatus and method for extending high definition multimedia signals from a source to a display over long distances (e.g., up to 300 feet) using a single cable medium having a plurality of twisted pair conductors contained therein. The extender transparently supports HDMI and / or DVI signaling, which allows encrypted video content to be displayed at the remote display (or other sink device). Display data channel control (DDC) information is sampled and transferred in packet from the local unit to a remote unit to comply with high-bandwidth digital content protection (HDCP).

The present invention provides a cable assembly and method of making thereof for use with HDMI / DVI connectors. The cable assembly of the present invention includes a flat extruded cable jacket that includes an oblong cross section. Parallel oblong orifices lie across the cross section of the extruded jacket, extend the length of the jacket and provide a means for the insertion of solid straight conductors extending through the oblong orifices. The alignment of the oblong orifices in conjunction with a cylindrical orifice provides a means to attach the conductors to a HDMI / DVI connector. The oblong configurations as associated with the present invention are also applicable for Firewire cable and provides for a flat cable assembly for use therein.

An interactive control system using a remote control signal in accordance with HDMI-CEX standards between a computer and an electric home appliance performs power supply control and screen display from a PC to a television, power supply control from the television to the PC, and application control on the PC. In the system, a personal computer (PC) is loaded with a controller capable of operating by a standby power supply. The remote control signal of a PC remote controller is input to an HDMI unit connector of a television through a photoreceiver controller of a PC, a USB / CEC power-on signal connector, a CEC unit connector, a signal line a, an HDMI unit connector, and a cable. The remote control signal of a TV remote controller is input to the cable, the HDMI unit connector, the CEC unit connector, a USB power supply connector, and a USB data processing unit.

A transmit digital processing system for wireless transmission of HDMI and / or DVI data using an FPGA. The FPGA converts the data into two data streams and includes a front end component multiplexing video data with control data. A complementary receive FPGA is also disclosed.

A digital cable TV receiver includes a POD module and a host device. The host device includes a controller and a HDMI port linked to a first peripheral device. When the controller receives a diagnostic request for HDMI status from the POD module, it generates a HDMI status report and transmits the DVI status report to the POD module. The HDMI status report includes HDMI status information associated with the first peripheral device. If the host device further includes a DVI port linked to a second peripheral device and receives a diagnostic request for HDMI / DVI status from the PDO module, it generates a HDMI / DVI status report and transmits the HDMI / DVI status report to the POD module. The HDMI / DVI status report includes HDMI status information associated with the first peripheral device and DVI status information associated with the second peripheral device.

The invention discloses an HDMI-CF electric coupler automatic assembling machine. A vibration disk is arranged and a first feeding mechanism is arranged on an operating platform, so automatic feeding of metal shells can be achieved; a second feeder and a third feeder are arranged on the operating platform, so automatic feeding of rubber core material strips can be achieved; in addition, when the rubber core material strips are fed, a first material cutting mechanism can cut off wastes at head ends of the rubber core material strips; through a metal shell fixing mechanism and a rubber core inserting mechanism, rubber cores can be inserted into the metal shells; a rubber core correcting mechanism is arranged subsequently, so the rubber cores can be corrected; a clamping point riveting mechanism can rivet clamping points of the metal shells and enable the rubber cores not to retreat; a material strip pre-cutting mechanism works in cooperation with a second material cutting mechanism to cut off the material strips at the back ends of the rubber cores to obtain finished products; the finished products are conveyed to a detection mechanism for automatic quality and performance detection, qualified products can be used for feeding directly, unqualified products can be conveyed to an unqualified product collection box through a sorting mechanism, so full-automatic production of the rubber cores and the metal shells can be achieved.

An HDMI connector assembly includes a female connector and a male connector. The female connector includes a female housing which has a front and a back surface and defines first passageways and a second passageway both communicating with the front and the back surface, electrical terminals received in the first passageways, an indicate terminal received in the second passageway, and a female metallic shell. The back of the indicate terminal forms a welding portion protruding out from the back surface for connecting with an indication circuit of a printed circuit board. The front of the indicate terminal forms a contact portion being at the front of the front surface. The female metallic shell defines a space for receiving the female housing therein. At least one grounding portion protrudes from the bottom of the female metallic shell for connecting with a ground circuit of the printed circuit board.

A self-powered apparatus able to deliver an output HDMI signal as well as mix a data input source with a self-generated signal and making the result available as an output HDMI signal.

A television set includes: an internal speaker which outputs sound; a memory which holds information; a remote controller receiver which receives an instruction from the outside of the television set; a microcomputer which causes, based on a mode specifying instruction for specifying a sound output mode received by the remote controller receiver, the memory to hold any one of (a) information that indicates a first sound output mode in which sound is outputted from the internal speaker and (b) information that indicates a second sound output mode in which sound is outputted from an external speaker that is a speaker outside the television set; and an HDMI / CEC communication unit which outputs the information that indicates the sound output mode and that is held by the memory, to an amplifier which controls to operate or not operate the speaker outside the television set.

A video signal receiving apparatus comprises a HDMI receiver, signal processing section and control section. The HDMI receiver separates a digital signal conformable to HDMI standards into video component and audio component, determining whether a received digital video signal is a RGB or YCbCr signal, and changing its setting in accordance with the determination result. The signal processing section decodes video signal and audio signal separated by the HDMI receiver to restore analog video signal and audio signal. The control section changes the setting of the HDMI receiver by an operation.

The invention provides a Wi-Fi display switching device and method among terminals. The device comprises an HDMI / MHL signal receiving module, a wireless audio / video signal conversion module and a wireless audio / video signal sending module, wherein the HDMI / MHL signal receiving module is used for receiving HDMI / MHL signals output from the HDMI / MHL signal output interfaces of audio / video signal sending terminals, the wireless audio / video signal conversion module is connected to the HDMI / MHL signal receiving module and is used for converting the obtained HDMI / MHL signals into wireless audio / video signals, and the wireless audio / video signal sending module is connected to the wireless audio / video signal conversion module and is used for sending the converted wireless audio / video signals to wireless audio / video signal receiving modules of audio / video signal receiving terminals. The invention further provides a device and method for interaction control over a vehicle-mounted system and smart mobile terminals based on the Wi-Fi display technology. The Wi-Fi display switching device and method among the terminals achieve the fact that wired audio / video signals are converted into the wireless audio / video signals, greatly increase the number of the smart mobile terminals supported by the Wi-Fi display, can further provide a smart mobile terminal charging function while the Wi-Fi display is carried out, and prolong the continuous working hours of devices carrying out interaction control among terminals through the Wi-Fi display.

A video display system is a system in which a video transmission device 10 and a video display device 20 are connected via an HDMI 1. The video display device 20 includes an EDID memory 25 in which display side recognition data in plural formats are stored and one of them is set as an initial read data, a response unit 23 replying an HPD for a connection signal (power +5 V) inputted from the video transmission device 10 via the HDMI 1 and the initial read data of the EDID memory 25, and a control unit 24 resetting an output of the HPD after replacing the initial read data into the data of the EDID memory 25 in another format when a display recognition command from a remote controller 30 is accepted.

The invention provides a panoramic video monitoring method and device orienting large-scale scenes. The device comprises front end video capture coding equipment and data transmission equipment. A large-scale scene monitoring system comprises software and hardware of data acceptance, video decoding, video processing, output coding and the like. The method finishes the steps of video data acceptation, video decoding, video registering, GPU real-time splicing and color fusing. Panoramic monitoring image sequences obtained through splicing fusion are continuously output to display equipment through an HDMI / DVI for displaying; meanwhile, real-time coding of a panoramic monitoring image is supported, and transmission and storage are carried out through a network. According to the method and the device, the splicing effect and the splicing quality of panoramic videos can be ensured, the efficiency of video splicing is improved, the real-time demand is met, and the obtained panoramic videos are natural and real. In actual application, the requirement of follow-up panoramic video splicing can be well ensured, installation arrangement of site equipment can be simplified, and the implementation is high.

If a device non-compatible with CEC is contained in an input path when a display apparatus is HDMI-connected hierarchically to a plurality of external devices, an external device which has transmitted <Active Source> is selected as an operation object device. A TV (100) is HDMI-connected hierarchically to external devices (an AV amplifier (20a), recorders (10a, 10c), a DVD player (10b)) in a tree shape. The TV (100) receives <Active Source> indicating an active state capable of video output from the DVD player (10b) and transmits <Set Stream Path> for switching the input path to the DVD player (10b). When a device non-compatible with CEC (AV amplifier (20a)) is contained in the input path which transmits <Set Stream Path>, the TV (100) selects the DVD player (10b) specified <Active Source> as an operation object device.

A wireless transmission system includes a wireless HDMI transmitter and a wireless HDMI receiver. The wireless HDMI transmitter includes a carrier oscillator provided for each channel of an HDMI transmission path to output a carrier signal in a millimeter band, an OOK modulator provided for each carrier oscillator to perform on-off keying modulation on a carrier signal outputted by its corresponding carrier oscillator, and an input circuit provided for each channel of the HDMI transmission path to input a digital signal outputted by a source device to the OOK modulator. Radio signals have different planes of polarization from their adjacent channels.

A system of transferring of three dimensional (3D) image data is described. A 3D source device (10) provides 3D display signal (56) for a display (13) via a high speed digital interface like HDMI. The 3D display signal comprises a sequence of frames. The sequence of frames comprises units, each unit corresponding to frames comprising video information intended to be composited and displayed as a 3D image. The 3D source device includes 3D transfer information comprising at least information about the video frames in the unit. The display detects the 3D transfer information, and generates the display control signals based in dependence on the 3D transfer information. The 3D transfer information in an additional info frame packet comprises information about the multiplexing scheme for multiplexing frames into the 3D display signal, the multiplexing scheme being selected of group of multiplexing schemes including frame alternating multiplexing, the frame alternating indicating said number of frames being sequentially arranged within said video data period.

An improved structure for HDMI connector comprises a resilient buckle plate embedded on a side of a HDMI connector and a containing space formed in front of the resilient buckle plate, said resilient buckle plate having a plurality of retaining blocks disposed on a front end thereof and protruding out of said HDMI connector. Said containing space is disposed for a protruding portion at a front end of a resilient plate of a socket for HDMI connector to buckle up with. When plugging said HDMI connector into a common socket for HDMI connector, as said HDMI connector goes to the latched position inside said socket, said retaining blocks of said resilient buckle plate are buckled at an opening of said socket for HDMI connector to let said HDMI connector and said socket fixedly buckle up with each other. This improved structure can be used with any kind of sockets for HDMI connector.

Implementations of the present invention include a Public Cloud, one or more End-Caches and optionally one or more Edge-Caches in computerized architecture that provides digital content, such as entertainment services and / or informational content, to a guest display (i.e., End-Cache connected to in-room TV). Implementations of the present invention also include a Content Distribution Architecture that uses the public Internet to securely broadcast large digital media file(s) simultaneously to all desired locations (e.g., Edge-Caches). Implementations of the present invention further include a Channel Processor that uses a video-input agnostic approach (i.e., composite, sVideo, component, HDMI) to take whatever video signal (i.e., std-def, high-def) and make it better (i.e., all digital, all high-def quality). Implementations of the present invention therefore improve distribution of entertainment to end users, as well as the playback thereof.