1993 results about "Carrier phase" patented technology

Described is an automatic control system for land (and possible marine) vehicles based on carrier phase differential GPS (CPGPS). The system relies on CPGPS to determine vehicle position and attitude very precisely (position to within 1 cm and attitude to within 0.1 DEG ). A system incorporates a technique to calculate and compensate for antenna motion due to vehicle roll and pitch. One aspect of the system utilizes an intelligent vehicle controller that recognizes and adapts to changing conditions, such as vehicle speed, implements towed by the vehicle, soil conditions, and disturbance level. The system provides the capability to control the vehicle on various paths, including straight lines and arbitrary curves. Also described is a technique for initialization and vehicle control using only a single pseudolite.

Disclosed herein is a system for rapidly resolving position with centimeter-level accuracy for a mobile or stationary receiver [4]. This is achieved by estimating a set of parameters that are related to the integer cycle ambiguities which arise in tracking the carrier phase of satellite downlinks [5,6]. In the preferred embodiment, the technique involves a navigation receiver [4] simultaneously tracking transmissions [6] from Low Earth Orbit Satellites (LEOS) [2] together with transmissions [5] from GPS navigation satellites [1]. The rapid change in the line-of-sight vectors from the receiver [4] to the LEO signal sources [2], due to the orbital motion of the LEOS, enables the resolution with integrity of the integer cycle ambiguities of the GPS signals [5] as well as parameters related to the integer cycle ambiguity on the LEOS signals [6]. These parameters, once identified, enable real-time centimeter-level positioning of the receiver [4]. In order to achieve high-precision position estimates without the use of specialized electronics such as atomic clocks, the technique accounts for instabilities in the crystal oscillators driving the satellite transmitters, as well as those in the reference [3] and user [4] receivers. In addition, the algorithm accommodates as well as to LEOS that receive signals from ground-based transmitters, then re-transmit frequency-converted signals to the ground.

A signal detector employs a coherent accumulation system that coherently combines the correlation results derived from segments of samples of a received signal. The segments may have non-uniform lengths and may have been obtained over different and non-overlapping time periods. The segments are obtained during sampling windows of arbitrary length and at arbitrary times, and the results of processing the segments are successively combined in a coherent manner (separate magnitude and phase accumulation) until a threshold signal-to-noise ratio (SNR) has been achieved. Coherent integration is enabled by introducing a carrier phase offset as well as a code phase offset, so that different segments are aligned in carrier phase as well as code phase. Although not limited to this application, in one implementation example, the signal detector is used in connection with and as part of a global positioning system (GPS) receiver.

A positioning and navigation method and system thereof can substantially solve the problems encountered in global positioning system-only and inertial navigation system-only, such as loss of global positioning satellite signal sensibility to jamming and spoofing, and inertial solution's drift over time, in which the velocity and acceleration from an inertial navigation processor and an attitude and heading solution from an AHRS processor are used to aid the code and carrier phase tracking of the global positioning system satellite signals, so as to enhance the performance of the global positioning and inertial integration system, even in heavy jamming and high dynamic environments and when the GPS satellite signals are not available.

A receiver for continuous carrier phase tracking of low carrier-to-noise ratio (“CNR”) signals from a plurality of radio navigation satellites while the receiver is mobile. The receiver may have: a radio frequency (RF) front-end that provides satellite data corresponding to signals received from the plurality of radio navigation satellites; an inertial measurement unit (IMU) that provides inertial data; and a processor circuit in circuit communication with the RF front end and the IMU, the processor circuit being capable of using satellite data from the RF front-end and inertial data from the IMU to perform continuous carrier phase tracking of low CNR radio navigation satellite signals having a CNR of about 20 dB-Hz, while the receiver is mobile. The receiver may be a GPS receiver for continuous carrier phase tracking of low-CNR GPS signals.

The present invention is a geolocation system for providing coordinated sensing and precision geolocation of a target emitter. The system may include a Quint Networking Technology (QNT) subsystem which may be configured receiving, detecting and identifying a target emitter signal. The QNT subsystem may be further configured for extracting a carrier phase of the signal. The system may further include a Real Time Kinematic Global Positioning System (RTK GPS) subsystem for determining a position of the geolocation system relative to a position of a second geolocation system. Further, the system may be configured for communicating with the second geolocation system via a QNT communication data link for: determining a QNT time difference via signal carrier phase differencing for calculating a time difference between the geolocation systems and geolocating the target emitter based on both the relative position information of the geolocation systems and the calculated time difference between the geolocation systems.

A global navigation satellite sensor system (GNSS) and gyroscope control system for vehicle steering control comprising a GNSS receiver and antennas at a fixed spacing to determine a vehicle position, velocity and at least one of a heading angle, a pitch angle and a roll angle based on carrier phase position differences. The roll angle facilitates correction of the lateral motion induced position errors resultant from motion of the antennae as the vehicle moves based on an offset to ground and the roll angle. The system also includes a control system configured to receive the vehicle position, heading, and at least one of roll and pitch, and configured to generate a steering command to a vehicle steering system. The system includes gyroscopes for determining system attitude change with respect to multiple axes for integrating with GNSS-derived positioning information to determine vehicle position, velocity, rate-of-turn, attitude and other operating characteristics. A vehicle control method includes the steps of computing a position and a heading for the vehicle using GNSS positioning and a rate gyro for determining vehicle attitude, which is used for generating a steering command.

A global navigation satellite sensor system (GNSS) and gyroscope control system for vehicle steering control comprising a GNSS receiver and antennas at a fixed spacing to determine a vehicle position, velocity and at least one of a heading angle, a pitch angle and a roll angle based on carrier phase position differences. The roll angle facilitates correction of the lateral motion induced position errors resultant from motion of the antennae as the vehicle moves based on an offset to ground and the roll angle. The system also includes a control system configured to receive the vehicle position, heading, and at least one of roll and pitch, and configured to generate a steering command to a vehicle steering system. The system includes gyroscopes for determining system attitude change with respect to multiple axes for integrating with GNSS-derived positioning information to determine vehicle position, velocity, rate-of-turn, attitude and other operating characteristics. A vehicle control method includes the steps of computing a position and a heading for the vehicle using GNSS positioning and a rate gyro for determining vehicle attitude, which is used for generating a steering command. Alternative aspects include multiple-antenna GNSS guidance methods for high-dynamic roll compensation, real-time kinematic (RTK) using single-frequency (L1) receivers, fixed and moving baselines between antennas, multi-position GNSS tail guidance (“breadcrumb following”) for crosstrack error correction, articulated implements with multiple antennas on each implement section, video input and guiding multiple vehicles and pieces of equipment relative to each other.

A global navigation satellite sensor system (GNSS) and gyroscope control system for vehicle steering control comprising a GNSS receiver and antennas at a fixed spacing to determine a vehicle position, velocity and at least one of a heading angle, a pitch angle and a roll angle based on carrier phase position differences. The roll angle facilitates correction of the lateral motion induced position errors resultant from motion of the antennae as the vehicle moves based on an offset to ground and the roll angle. Alternative aspects include multiple-antenna GNSS guidance methods for high-dynamic roll compensation, real-time kinematic (RTK) using single-frequency (L1) receivers, fixed and moving baselines between antennas, multi-position GNSS tail guidance (“breadcrumb following”) for crosstrack error correction, guiding multiple vehicles and pieces of equipment relative to each other, and snow grooming equipment and method applications.

A Global Navigation Satellite System (GNSS) receiver and associated method capable of tracking weak GNSS signals from a plurality of GNSS satellites. In a preferred embodiment, code and carrier tracking loops are initially closed around the code phase, carrier frequency, and data bit edge estimates handed over from an acquisition mode. In subsequent tracking, early, prompt, and late copies of the code replica are correlated with the incoming signal. The prompt correlations are coherently integrated over an extended updating interval for data bit edge and sign estimation as well as for carrier phase and frequency error discrimination whereas the early and late correlations are used for code error discrimination. Code delay and carrier phase and frequency errors are used to update the code and carrier tracking loop filters. Together with data bits, they form observables of a GNSS signal's time and frequency parameters for timing and position fixing.

An apparatus includes a global navigation satellite system antenna, a global navigation satellite system receiver, a camera, and a processor. The mobile global navigation satellite system receiver produces a set of carrier-phase measurements from a global navigation satellite system. The camera produces an image. The processor determines an absolute position and an absolute attitude of the apparatus solely from three or more sets of data and a rough estimate of the absolute position of the apparatus without any prior association of visual features with known coordinates. Each set of data includes the image and the set of carrier-phase measurements. In addition, the processor uses either a precise orbit and clock data for the global navigation satellite system or another set of carrier-phase measurements from another global navigation satellite system antenna at a known location in each set of data.

Disclosed is a method for providing a Global Navigation Satellite System (GNSS) navigation position solution with guaranteed integrity in non-controlled environments, the method including processing a (GNSS) signal including multiple satellites generating at least one signal to obtain carrier phase and pseudorange measurements; pre-processing the measurements to detect and characterize local errors in the measurements, wherein the local errors cannot be ascertained a priori, the characterization including providing error bounds estimated by measuring the carrier phase and pseudoranges measurements, thereby providing a set of measurements rejections when the characterization is not possible; and using the estimated error bounds, together with error bounds provided by the GNSS signal concerning satellite and ionospheric errors, to build in each measurement an estimated noise level in the measurements as input to a weighted Receiver Autonomous Integrity Monitoring (RAIM) algorithm in order to compute position coordinates and associated protection levels in the non-controlled environments.

A global navigation satellite sensor system (GNSS) and gyroscope control system for vehicle steering control comprising a GNSS receiver and antennas at a fixed spacing to determine a vehicle position, velocity and at least one of a heading angle, a pitch angle and a roll angle based on carrier phase position differences. The roll angle facilitates correction of the lateral motion induced position errors resultant from motion of the antennae as the vehicle moves based on an offset to ground and the roll angle. The system also includes a control system configured to receive the vehicle position, heading, and at least one of roll and pitch, and configured to generate a steering command to a vehicle steering system. The system includes gyroscopes for determining system attitude change with respect to multiple axes for integrating with GNSS-derived positioning information to determine vehicle position, velocity, rate-of-turn, attitude and other operating characteristics. A vehicle control method includes the steps of computing a position and a heading for the vehicle using GNSS positioning and a rate gyro for determining vehicle attitude, which is used for generating a steering command. Alternative aspects include multiple-antenna GNSS guidance methods for high-dynamic roll compensation, real-time kinematic (RTK) using single-frequency (L1) receivers, fixed and moving baselines between antennas, multi-position GNSS tail guidance (“breadcrumb following”) for crosstrack error correction, guiding multiple vehicles and pieces of equipment relative to each other and earth-moving equipment and method applications.

A sensor system for vehicle steering control comprising: a plurality of global navigation satellite sensor systems (GNSS) including receivers and antennas at a fixed spacing to determine a vehicle position, velocity and at least one of a heading angle, a pitch angle and a roll angle based on carrier phase corrected real time kinematic (RTK) position differences. The roll angle facilitates correction of the lateral motion induced position errors resultant from motion of the antennae as the vehicle moves based on an offset to ground and the roll angle. The system also includes a control system configured to receive the vehicle position, heading, and at least one of roll and pitch, and configured to generate a steering command to a vehicle steering system.

A improved positioning and navigation method and system thereof can substantially solve the problems encountered in global positioning system-only and inertial navigation system-only, such as loss of global positioning satellite signal, sensibility to jamming and spoofing, and inertial solution's drift over time, in which the velocity and acceleration from an inertial navigation processor and an attitude and heading solution from an AHRS processor are used to aid the code and carrier phase tracking of the global positioning system satellite signals, so as to enhance the performance of the global positioning and inertial integration system, even in heavy jamming and high dynamic environments and when the GPS satellite signals are not available.