45 results about "Cpap treatment" patented technology

A notification system monitors changes in air flow channeled between a positive air pressure generator and a CPAP mask supplying positive airway pressure to a patient during treatment of sleep apnea. An air flow sensor and / or pressure sensor is positioned to monitor air flow channeled to the mask. When a sensor detects a significant change in air flow and / or air pressure, a detection signal is analyzed by a controller unit microprocessor for comparisons with a preselected operating range for air flow and / or pressure. Upon verification the air flow and / or pressure is not within the preselected range, a remote transmission is transmitted to an alarm means proximal of the patient. The alarm means directs at least one stimulus to the patient for alerting and waking the patient. The alarm stimulus includes audio and / or vibratory stimuli of sufficient intensity to alert the patient that mask adjustments are required for proper CPAP treatment.

A Continuous Positive Air Pressure (CPAP) full-face mask employs a flexible shell to allow a single device to comfortably fit a wide variety of users. It preferably employs a positionable guide wire at a periphery of the shell to allow the periphery of the flexible shell to be deformed to conform to the shape of a users face. It additionally uses a simpler design to allow lower cost and improved ease of use.

In a CPAP or positive pressure ventilation system, leak is determined at each instant by a lookback for a time as long as single breath to establish the start of an averaging window over which low-pass filtered values used in the determination of a parameter of a leak model are averaged. A jamming index indicates whether the leak is rapidly changing. To the extent that jamming is high, the leak estimate used progressively changes from that using sliding breath-window averaging to a more robust and faster responding low-pass filter method, and adjustment of ventilatory support based on measures employing estimated respiratory flow is slowed down or stopped.

CPAP treatment apparatus (10), as one form of positive pressure ventilatory assistance, is disclosed. A turbine / blower (14), operated by a mechanically coupled electrical motor (16), receives air or breathable gas at an inlet (18) thereof, and supplies the breathable gas at a delivery pressure to a delivery tube / hose (20) having connection at the other end thereof with a nose mask (12). A microcontroller (38) has an operational "Mask-Fit" mode. An initial constant pressure level is applied by the blower (14) to the mask (12). If the functional mode is a Manual mode, then the mask-fit test pressure is the current "set' pressure. If the functional mode is the Automatic Titration mode, the mask-fit test pressure is the 95th percentile pressure of the previous session, otherwise it is the base treatment pressure, e.g. 10-12 cm H2O. This constant pressure is applied for a period of time, typically 1-3 minutes. The microcontroller (38) continuously determines mask leak as the value, fLEAK, from a flow sensor (32), comparing this to a threshold, and providing the patient with a visual indication of degree of leak. In this way the patient can manipulate the mask to ensure correct fitting as indicated by the appropriate message or indication.

The present invention provides a vent assembly suitable for use with a respiratory mask of the type used in CPAP treatment. In one embodiment the vent is made of a thin air permeable membrane. Generally, the membrane is thinner than 0.5 mm. The membrane can be made of a hydrophobic material such as polytetrafluoroethylene (PTFE). The membrane can also be fabricated from expanded PTFE. The expanded PTFE membrane is mounted on a polypropylene scrim. The pores of the membrane have a reference pore size of 10 to 15 microns. In an alternative embodiment, the vent assembly includes a vent constructed from stainless steel. In another embodiment the membrane has a superficial cross-sectional area of approximately 500 mm2. In another embodiment the vent assembly comprises a membrane attached to a vent frame, the vent assembly forming an insert which can be removeably attached to a mask fame.

A vent assembly for use with a respiratory mask of the type used in CPAP treatment includes a porous disk portion that is attached to a biasing member such that the disk portion is maintained in a substantially sealed position against a main vent to minimize airflow through at least one side vent of the vent assembly. Debris build-up on the disk portion can cause the biasing member to deflect to provide an additional path for airflow through the at least one side vent. In another embodiment, the vent assembly can also include an anti-asphyxia feature to provide an airflow path from the environment to the user. An oxygen diverter valve may be disposed between the breathing apparatus flow generator and an oxygen injection port.

A method of operating a device for treating sleep disordered breathing (SDB), wherein the device provides continuous positive airway pressure during sleep, includes determining whether treatment pressure at the patient interface is below a desired value, in response to the determining, increasing pressure generated by the flow generator, in response to the increasing, making a determination that the increase in flow generator pressure has resulted in less than a desired increase in treatment pressure at the patient interface, and in response to the determination, reducing or inhibiting further increase of the flow generator pressure.

Methods and apparatus for assessing the condition of and treating patients for stroke during the delivery of continuous positive airway pressure (CPAP) are disclosed. By determining central and obstructive apnea occurrences or the percentile of pressure delivered to the patient from patient airflow, stroke indicators may be calculated and analyzed to provide information on the type of stroke a patient has suffered and the degree of a patient's neuro-recovery. The apparatus may be programmed with a particular protocol intended to identify between alternative forms of CPAP treatment appropriate for the patient based upon an assessment of the patient's condition. The device can select and recommend between the various treatment forms, identify billing reimbursement codes and generate data to track patient response to stroke treatments.

The present invention provides a vent assembly suitable for use with a respiratory mask of the type used in CPAP treatment. In one embodiment the vent is made of a thin air permeable membrane. Generally, the membrane is thinner than 0.5 mm. The membrane can be made of a hydrophobic material such as polytetrafluoroethylene (PTFE). The membrane can also be fabricated from expanded PTFE. The expanded PTFE membrane is mounted on a polypropylene scrim. The pores of the membrane have a reference pore size of 10 to 15 microns. In an alternative embodiment, the vent assembly includes a vent constructed from stainless steel. In another embodiment the membrane has a superficial cross-sectional area of approximately 500 mm2. In another embodiment the vent assembly comprises a membrane attached to a vent frame, the vent assembly forming an insert which can be removeably attached to a mask fame.

An apparatus for improving patient comfort during CPAP therapy includes a venting arrangement arranged to reduce expiratory pressure. A mask system for providing CPAP therapy to a patient includes a mask; a flow generator to provide a flow of pressurised breathable gas; a tube to connect the mask to the flow generator; and a venting arrangement arranged to reduce expiratory pressure.

CPAP treatment apparatus is disclosed having a controllable positive airway pressure device. A sensor generates a signal representative of patient respiratory flow that is provided to a controller. The controller is operable to determine the occurrence of an apnea from a reduction in respiratory airflow below a threshold determined from long term ventilation. When an apnea or hypopnea has occurred the calculation of the threshold is suspended until the end of that event.

The intraoral mandibular advancing positive pressure apparatus utilizes mandibular advancement (or protrusion) therapy with CPAP therapy. The mandibular advancement appliance is fabricated to receive a portion of a person's upper and lower teeth when the patient bites down on the appliance. The mandibular advancement appliance advances the patient's mandible a predetermined amount. The mandibular advancement appliance contains a fluid communication pathway that provides for access to the patient's oral cavity. A CPAP device is in fluid communication with the fluid communication pathway and supplies a continuous positive pressure air supply. The utilization of mandibular advancement therapy with CPAP therapy reduces the amount of advancement necessary through mandibular advancement and eliminates the need for nasal involvement or a facial mask typically associated with CPAP therapy.

An air delivery system includes an air flow generator to provide a pressurized flow of air, a patient interface to provide a seal with the patient's face in use, an air delivery conduit to interconnect the air flow generator and the patient interface, and a controllable vent valve to control venting from the patient interface. The vent valve is controlled to maintain a substantially constant air flow in the air delivery conduit and the air flow generator.

Methods for detecting a patient disconnecting from a continuous positive airway pressure (CPAP) therapy device are disclosed. A cyclical pressure difference signal is derived based upon measurements from a patient interface pressure sensor and from a source pressure sensor. The pressure difference signal is integrated to generate a resultant integral signal for each respiratory cycle, which is comprised of at least one inspiratory phase and at least one expiratory phase as represented by the corresponding portions of the pressure difference signal. A pressure source of the CPAP therapy device is deactivated in response to a disconnect condition being evaluated from the integral signal. In one embodiment, the disconnect condition is the integral signal exceeding a predefined disconnect threshold. In other, it is a slope value corresponding to a rate of increase of the integral signal exceeding a predefined threshold for a predefined duration.

In a CPAP or positive pressure ventilation system, leak is determined at each instant by a lookback for a time as long as single breath to establish the start of an averaging window over which low-pass filtered values used in the determination of a parameter of a leak model are averaged. A jamming index indicates whether the leak is rapidly changing. To the extent that jamming is high, the leak estimate used progressively changes from that using sliding breath-window averaging to a more robust and faster responding low-pass filter method, and adjustment of ventilatory support based on measures employing estimated respiratory flow is slowed down or stopped.

CPAP treatment apparatus is disclosed having a controllable flow generator (34, 38, 40) operable to produce breathable gas at a treatment pressure elevated above atmosphere to a patient by a delivery tube (32) coupled to a mask (30) having connection with a patient's airway. A sensor (44, 50, 56, 58) generates a signal representative of patient respiratory flow, that is provided to a controller (54, 62, 64). The controller (54, 62, 64) is operable to determine the occurrence of an apnea from a reduction in respiratory airflow below a threshold, and if an apnea has occurred, to determine the duration of the apnea and to cause the flow generator (34, 38) to increase the treatment pressure. In one preferred form the increase in pressure is zero if the treatment pressure before the apnea exceeds a pressure threshold. Below the pressure threshold the increase in pressure is an increasing function of the duration of the apnea multiplied by the difference between the pressure threshold and the current treatment pressure.

A CPAP compliance notification apparatus for use with a CPAP device having a flow generator, a CPAP hose, and a CPAP mask, the CPAP compliance notification apparatus, including a patient occupancy mat, an air pressure sensor, an air pressure tube, a compliance notification controller unit, a housing, a user interface, a programmable logic controller together with a patient to control parameters of the CPAP compliance notification apparatus in implementing a compliant CPAP treatment to the patient.

A mouthpiece for oral delivery for oral delivery of CPAP treatment has a vestibular shield for location between the teeth and lips / cheeks of a wearer. The vestibular shield is formed from a very supple material and is dimensioned to extend laterally into the buccal vestibule and vertically to overlap the gums. A gases pathway is provided through the vestibular shield and may include a hard plastic insert through the shield. A connection for connecting the mouthpiece to a breathing circuit is provided which reduces the transfer of forces caused by movement therebetween.

A combination positive airway pressure (PAP) or continuous positive airway pressure (CPAP) and resuscitation system and related methods. The systems can be well-suited for use in providing CPAP therapy for a neonate or infant patient, with the ability to also provide resuscitation therapy at a peak inspiratory pressure (PIP) as needed or desired without switching to another system or switching the patient interface. The system can include an expiratory pressure device capable of regulating a positive end expiration pressure (PEEP) of the system, which preferably can also induce pressure oscillations relative to a mean PEEP.